Structural morphology of poly(styrene)-poly(butyl acrylate) polymer-polymer composites studied by dynamic mechanical measurements

The emulsion polymerization process allows production of polymer particles with different structural morphologies. Films obtained after coalescence keep some memory of this morphology, but large modifications can occur during coalescence. In the present case, one of the polymers, polystyrene (PS), exhibits a glass temperature (Tg) much higher than the filmification temperature (close to room temperature), while the other one, poly(butyl acrylate) (PBA), has a much lowerTg. Furthermore, it is well known that dynamic mechanical measurements can be very helpful in providing information on the morphology of polymer materials, i.e., on geometrical and topological arrangement of homopolymer domains. At first, this method was used for comparison of two types of films: i) the first one obtained from structured-core (PS)-shell (PBA) particles, ii) the second one obtained from a blend of homopolymer particles (PS and PBA). It appears that the expected core-shell particles lost their geometric structure in the second film. Second, comparison of the predicted dynamic modulus and experimental data shows that i) strong interactions exist between PS nodules unless their coalescence has occured, leading to an abnormally high modulus at room temperature, ii) after achieving their coalescence, PS forms a more or less continuous phase. Both phenomena strongly depend on the particle size and their respective volume fractions.     

Highly enantioselective synthesis of 2H-1-benzothiopyrans by a catalytic domino reaction

A highly enantioselective catalytic asymmetric synthesis of 2H-1-benzothiopyrans is presented. The organocatalytic asymmetric domino reactions between 2-mercaptobenzaldehyde and α,β-unsaturated aldehydes proceed with excellent chemo- and enantioselectivities to give the corresponding pharmaceutically valuable benzothiopyrans in high yields with 91-98% ee.     

1H and 13C assignments of two new triterpenes from Cladocolea grahami

The structure elucidation and 1H and 13C assignments of the new triterpenes 3beta-palmitoxy-7beta-hydroxyolean-12-ene (1) and its hydrolysis product 3beta,7beta-dihydroxyolean-12-ene (2) and 3beta-sn-glyceroyl-(1'-palmitoxy)urs-12-ene (3), isolated from the aerial parts of Cladocolea grahami (Loranthaceae), are reported.     

A simple one-pot, three-component, catalytic, highly enantioselective isoxazolidine synthesis

The highly chemo- and enantioselective organocatalytic three-component reaction between N-arylhydroxylamines, aldehydes and α,β-unsaturated aldehydes is presented; the reaction gives access to isoxazolidines in high yields with >25:1 dr and 91-99% ee.     

Stannyl radical-mediated cleavage of pi-deficient heterocyclic sulfones. Synthesis Of alpha-fluoro esters

Treatment of ethyl 2-(pyridin-2-ylsulfonyl)hexanoate with tributylstannane and azobis(2-methyl-2-propanitrile) (AIBN) in benzene at reflux for 36 h resulted in hydrogenolysis to give ethyl hexanoate (60%), whereas no reaction was observed after 48 h at reflux with ethyl 2-(phenylsulfonyl)hexanoate. Ethyl 2-(pyrimidin-2-ylsulfonyl)hexanoate underwent quantitative hydrogenolysis within 1 h under these conditions. This represents a mild new methodology for removal of the synthetically useful sulfone moiety. Substitution of Bu(3)SnD for Bu(3)SnH gave access to alpha-deuterium-labeled esters. Treatment of the alpha-(pyrimidin-2-ylsulfonyl) enolates derived from several esters with Selectfluor gave high yields of the 2-fluoro-2-(pyrimidin-2-ylsulfonyl)alkanoates, which were smoothly desulfonylated [Bu(3)SnH (2 equiv)/AIBN/benzene/Delta] to give 2-fluoroalkanoates. "Catalytic" tin hydride, generated from tribuytltin chloride (0.15 equiv) and excess polymethylhydrosiloxane in the presence of potassium fluoride, also effected removal of the pi-deficient alpha-(pyrimidin-2-ylsulfonyl) moiety from acid derivatives in high yields. Desulfonylation is suggested to proceed via alkoxy ketyl-type radicals and tin enolates.     

Structural evolution of (Ca0.35Sr0.65)TiO3 perovskite at high pressures

Lattice parameters of a synthetic powder sample of Ca_0.35Sr_0.65TiO₃ perovskite have been determined by the method of Le Bail refinement, using synchrotron X-ray diffraction patterns collected at pressures up to 15.5 GPa with a membrane-driven diamond anvil cell. At ambient conditions, diffraction data were consistent with the I4/mcm structure reported previously in the literature for the same composition. Diffraction data collected at high pressures were consistent with tetragonal (or, at least, pseudo-tetragonal) lattice geometry, and no evidence was found for the development of any of the orthorhombic structures identified in other studies of (Ca, Sr)TiO₃ perovskites. Additional weak reflections, which could not be accounted for by the normal I4/mcm perovskite structure, were detected in diffraction patterns collected at pressures of 0.9-2.5 GPa, and above ∼13.5 GPa, however. Small anomalies in the evolution of unit cell volume and tetragonal strain were observed near 3 GPa, coinciding approximately with breaks in slope with increasing pressure of bulk and shear moduli for a sample with the same composition which had previously been reported. The anomalies could be due either to new tetragonal↔tetragonal/pseudo-tetragonal phase transitions or to subtle changes in compression mechanism of the tetragonal perovskite structure.     

New structural motifs in the aggregation of neutral gold(I) complexes: structures and luminescence from (alkyl isocyanide)AuCN

The preparation and X-ray crystal structures of (CyNC)Au(I)CN, (n-BuNC)Au(I)CN, and (i-PrNC)Au(I)CN.0.5CH(2)Cl(2) are reported and compared with those of (MeNC)Au(I)CN and (t-BuNC)Au(I)CN, which were previously described. These linear molecules are all organized through aurophilic interactions into three structural classes: simple chains ((CyNC)Au(I)CN and (t-BuNC)Au(I)CN), side-by-side chains in which two strands make Au...Au contact with each other ((n-BuNC)Au(I)CN), and nets in which multiple aurophilic interactions produce layers of gold(I) centers ((i-PrNC)Au(I)CN and (MeNC)Au(I)CN). All of these five solids dissolve to produce colorless, nonluminescent solutions with similar UV/vis spectra. However, each of the solids displays a unique luminescence with emission maxima occurring in the range 371-430 nm.     

Kinetic resolution of atropisomeric amides

We have demonstrated the feasibility of the kinetic resolution of atropisomeric amides using the commercially avaliable AD-mix. To our knowledge, this methodology represents the first catalytic kinetic resolution of such compounds. Relative rates of up to 32 have been found for the kinetic resolution processes. We have also determined the barriers to rotation and half-lives of some of these amides. The half-lives range from 7 to 135 h at room temperature.     

Unprecedented eta(1)-P(basal) coordination of P(4)X(3) molecules (X = S, Se). An experimental and theoretical study of the apical vs basal complexation dichotomy

Reaction of [(triphos)Re(CO)(2)(OTf)] (1) [triphos = MeC(CH(2)PPh(2))(3); OTf = OSO(2)CF(3)] with P(4)S(3) and P(4)Se(3) yields pairs of coordination isomers, namely, [(triphos)Re(CO)(2)[eta(1)-P(apical)-P(4)X(3)]](+) (X = S, 2; Se, 5) and [(triphos)Re(CO)(2)[eta(1)-P(basal)-P(4)X(3)]](+) (X = S, 3; Se, 6). The latter represent the first examples of the eta(1)-P(basal) coordination achieved by the P(4)X(3) molecular cage. Further reaction of 2/3 and 5/6 mixtures with 1 affords the dinuclear species [[(triphos)Re(CO)(2)](2)[mu,eta(1:1)-P(apical,)P(basal)-P(4)X(3)]](2+) (X = S, 4; Se, 7) in which the unprecedented M-eta(1)-P(basal)/eta(1)-P(apical)-M' bridging coordination of the P(4)X(3) molecule is accomplished. A theoretical analysis of the bonding properties of the two coordination isomers is also presented. The directionality of apical vs basal phosphorus lone pairs is also discussed in terms of MO arguments.     

Improved coupled-column liquid chromatographic method for the determination of glyphosate and aminomethylphosphonic acid residues in environmental waters

An existing method for the determination of glyphosate and its main metabolite aminomethylphosphonic acid (AMPA) in water has been improved. It is based on precolumn derivatization with the fluorescent reagent 9-fluorenylmethylcloroformate (FMOC) followed by large-volume injection in a coupled-column LC system using fluorescence detection (LC-LC-FD). The derivatization step was slightly modified by changing parameters such as volume and/or concentration of sample and reagents to decrease the limits of quantification (LOQ) of glyphosate and AMPA to 0.1 microg/l. Additionally, the use of Amberlite IRA-900 for preconcentration of glyphosate, prior to the derivatization step, was investigated; the LOQ of glyphosate was lowered to 0.02 microg/l. Drinking, surface and ground water spiked with glyphosate and AMPA at 0.1-10 microg/l concentrations were analysed by the improved LC-LC-FD method. Recoveries were 87-106% with relative standard deviations lower than 8%. Drinking and ground water spiked with glyphosate at 0.02 and 0.1 microg/l were analysed after preconcentration on the anion-exchange resin with satisfactory recoveries (94-105%) and precision (better than 8%).