Preparation and characterization of a novel DABCO-based ionic liquid supported on Fe3O4@TiO2 nanoparticles and investigation of its catalytic activity in the synthesis of quinazolinones

In this study, quinazolinone derivatives have been synthesized via a suitable and efficient procedure by one-potmulti-component reactions of 3-amino-1,2,4-triazole or 2-aminobenzimidazole, dimedone and aromatic aldehydes in the presence of Fe₃O₄@TiO₂-IL as nanocatalyst under solvent-free condition. The products were prepared in good to excellent yields using Fe₃O₄@TiO₂-IL magnetic nanocatalyst. The Fe₃O₄@TiO₂ magnetic nanoparticles (MNPs) were prepared using beet juice extract and functionalized with IL based on DABCO. Moreover, the core-shell structured magnetic Fe₃O₄@TiO₂-IL has been characterized by different techniques such as ¹H-NMR, FT-IR, VSM, XRD, SEM, TGA, TEM and EDX. To the best of our knowledge, the prepared ionic liquid displayed a good protective and activator agent for magnetic nanocatalyst.     

Synthesis,structure, spectroscopic,magnetic and electrochemical studies of a rare syn–anti acetate-bridged copper(II) complex

The structure, spectroscopy and electrochemical properties of a novel dinuclear copper(II) complex, [{Cu(phen)₂}₂(μ-CH₃COO)][PF₆]₃ where phen = 1,10-phenanthroline, is reported. The crystal structure contains two independent Cu(II) ions, with different geometry around each copper center, which are bridged by an acetate anion. The acetate-bridged ligand shows a syn–anti coordination mode with a trigonal bipyramidal geometry for the Cu(1) center and a distorted square-based pyramidal geometry for the Cu(2) center. The angular structural index parameter τ for Cu(1) and Cu(2) is 0.9 and 0.33, respectively. The copper(II) atoms display a different geometry with a N₄O chromophore group and with Cu–O distances of 1.993(5)–1.996(5) Å and Cu–N distances which vary from 1.980(5) to 2.161(6) Å. The intra Cu…Cu separation is 4.9904(5) Å. The effective magnetic moment (μ_eff) of the complex was measured by the Evans method. The cyclic voltammogram of [{Cu(phen)₂}₂(μ-CH₃COO)][PF₆]₃ shows two waves at positive potential which are assigned to the two Cu(II/I) reduction couples.     

Combination of cloud point extraction and flame atomic absorption spectrometry for preconcentration and determination of trace iron in environmental and biological samples

In the presented work, the conditions for cloud point extraction of iron from aqueous solutions using 7-iodo-8-hydroxyquinolin-5-sulphonic acid (Ferron) was investigated and optimized. The procedure is based on the separation of its ferron complex into the micellar media by adding the surfactant Triton X-114. After phase separation, the surfactant-rich phase was dissolved with 1.0 M HNO3 in methanol. Iron was determined by flame atomic absorption spectrometry. Optimization of the pH, ligand and surfactant quantities, incubation time, temperature, viscosity, sample volume, and interfering ions were investigated. The effects of the matrix ions were also examined. The detection limits for three times the standard deviations of the blank for iron was 0.4 ng m L-1, enrichment factor of 19.6 and preconcentration factor of 30 could be achieved. The validity of cloud point extraction was checked by employing real samples including soil, blood, spinach, milk, meat, liver and orange juice samples using the standard addition method, which gave satisfactory results.In the presented work, the conditions for cloud point extraction of iron from aqueous solutions using 7-iodo-8-hydroxyquinolin-5-sulphonic acid (Ferron) was investigated and optimized. The procedure is based on the separation of its ferron complex into the micellar media by adding the surfactant Triton X-114. After phase separation, the surfactant-rich phase was dissolved with 1.0 M HNO₃ in methanol. Iron was determined by flame atomic absorption spectrometry. Optimization of the pH, ligand and surfactant quantities, incubation time, temperature, viscosity, sample volume, and interfering ions were investigated. The effects of the matrix ions were also examined. The detection limits for three times the standard deviations of the blank for iron was 0.4 ng m L⁻¹, enrichment factor of 19.6 and preconcentration factor of 30 could be achieved. The validity of cloud point extraction was checked by employing real samples including soil, blood, spinach, milk, meat, liver and orange juice samples using the standard addition method, which gave satisfactory results.      

Integrating thermal-concentration smoothed profile with lattice Boltzmann methods for simulating sedimentation of nonisothermal circular particles

A thermal-concentration smoothed profile-lattice Boltzmann method is proposed to study the effect of the concentration field on the dynamic behavior of nonisothermal cylindrical particles during the sedimentation process. The velocity, temperature, and concentration equations are solved using the lattice Boltzmann method. Moreover, the smoothed profile method is employed to enforce the nonslip boundary condition as well as constant temperature and constant concentration boundary conditions at the particles surfaces. Moreover, the Boussinesq approximation is used to couple the velocities, temperatures, and concentrations fields. The proposed combined method is validated by comparing the present numerical results with those found in the literature, showing good consistency. Then, the effect of the concentration buoyancy on the behavior of nonisothermal particles is discussed. In addition, the effect of Prandtl, Schmidt, and thermal Grashof numbers on the settling process is investigated. The results show that, by adding the effect of concentration, the maximum settling velocity of hot particles is reduced more relative to the cold ones; accordingly, the cold particles are settled faster than the hot ones. Finally, the sedimentation of two particles in a container at high thermal Grashof is investigated. It is shown that, at high thermal Grashof, there is an intense competition between the buoyancy force and gravity for the hot particles. The buoyancy flow generated leads to the reversal of the drafting-kissing-tumbling motion of the hot particles, making the particles move upward.     

Investigation of double-diffusive mixed convection effect on the particles dissolution in the shear flow using coupled SPM–LBM

Journal of Thermal Analysis and Calorimetry - In the present study, double-diffusive mixed convection related to the heat and mass transfer of the solid particles dissolution in a shear flow was...     

Preparation and Characterization of Ni‐Modified Graphene Oxide Complex as an Efficient Catalyst for the Synthesis of Sulfides via Reaction of Arylhalides with S8 or Thiourea

In this work, complex of Ni‐modified graphene oxide was prepared and characterized using FT‐IR spectroscopy, SEM, XRD, TGA and ICP‐OES techniques. This compound used as an efficient and recoverable catalyst for the C–S coupling reaction using sulfur‐transfer reagents (S₈ or thiourea). The catalyst was easily separated using a simple filtration and reusable without significant loss of their catalytic efficiency.     

Intermolecular interactions in uracil–nitrous acid complexes: structures,binding energy,topological properties,and nuclear magnetic resonance study

Molecular interactions between uracil and nitrous acid (U–NA) [C₄N₂O₂H₄? NO₂H] have been studied using B3LYP, B3PW91, and MP2 methods with different basis sets. The optimized geometries, harmonic vibrational frequencies, charge transfer, topological properties of electron density, nucleus‐independent chemical shift (NICS), and nuclear magnetic resonance one‐ and two‐bonds spin–spin coupling constants were calculated for U–NA complexes. In interaction between U and NA, eight cyclic complexes were obtained with two intermolecular hydrogen bonds N(C)HU…N(O) and OH_NA…O_U. In these complexes, uracil (U) simultaneously acts as proton acceptor and proton donor. The most stable complexes labeled, UNA1 and UNA2, are formed via NH bond of U with highest acidity and CO group of U with lowest proton affinity. There is a relationship between hydrogen bond distances and the corresponding frequency shifts. The solvent effect on complexes stability was examined using B3LYP method with the aug‐cc‐pVDZ basis set by applying the polarizable continuum model (PCM). The binding energies in the gas phase have also been compared with solvation energies computed using the PCM. Natural bond orbital analysis shows that in all complexes, the charge transfer takes place from U to NA. The results predict that the Lone Pair (LP)(O)_U → σ*(O? H) and LP(N(O)_NA → σ*(N(C)? H)_U donor–acceptor interactions are most important interactions in these complexes. Atom in molecule analysis confirms that hydrogen bond contacts are electrostatic in nature and covalent nature of proton donor groups decreases upon complexation. The relationship between spin–spin coupling constant (^1hJ_H…_Y and ^2hJ_H…_Y) with interaction energy and electronic density at corresponding hydrogen bond critical points and H‐bonds distances are investigated. NICS used for indicating of aromaticity of U ring upon complexation. © 2013 Wiley Periodicals, Inc.     

POLYROTAXANE WITH π-CONJUGATED PORPHYRIN AND POLYAZOMETHINE SYSTEMS PREPARED FROM A TYPE OF PORPHYRIN-DIALDEHYDE AND COMPLEX OF β-CYCLODEXTRIN WITH 1,4-PHENYLENEDIAMINE

The synthesis of 5,15-bis[4-(methoxycarbonyl)phenyl]-10,20-diphenylporphyrin (2) and its reduction to 5,15-bis[4-(hydroxymethyl)phenyl]-10,20-diphenylporphyrin (3), and so its oxidation to provide 5,15-bis(4-formylphenyl)-10,20-diphenylporphyrin (4) are reported. The copolymer possessing β-cyclodextrin (β-CD), π-conjugated porphyrin and polyazomethine systems was synthesized by the polycondensation of porphyrin-dialdehyde monomer (4) and β-cyclodextrin/1,4-phenylenediamine complex (5). The monomers and the copolymer were characterized by UV-Vis, 1H-NMR and IR spectra. Furthermore, 1H-NMR and FT-IR spectra confirmed locating the aromatic ring of 1,4-phenylenediamine molecule in the center of β-cyclodextrin cavity.