Kinetics of carbon steel dissolution in ammonium chloride solution containing sodium thiosulfate

The dissolution behavior of carbon steel in ammonium chloride (NH₄Cl) solution containing sodium thiosulfate (Na₂S₂O₃) of various concentrations (0.01 and 0.1 M) was investigated using electrochemical impedance spectroscopy (EIS) and other nonelectrochemical techniques. The weight loss and polarization measurements indicate a significant increase in the NH₄Cl corrosion rate of carbon steel on addition of Na₂S₂O_3. The EIS measurements exhibited two capacitive loops at multiple direct current (dc) potentials for both the concentrations. Electrical equivalent circuit (EEC) and reaction mechanism analysis (RMA) were employed to analyze the impedance data. A four-step mechanism with two intermediate adsorbate species of same charge was proposed to explain the dissolution behavior of carbon steel in the given system. The surface coverage values enumerated that the surface was entirely covered with adsorbed species unlike in the pure NH₄Cl system. Charge transfer resistance and polarization resistance values estimated from RMA parameters indicate the increase in a dissolution rate with dc potential. The surface morphology was inspected via field emission scanning electron microscopy, and the corrosion products including surface state of carbon steel electrode were analyzed using energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy.     

Small molecular logic systems can draw the outlines of objects via edge visualization

The recently-discovered ability of small logical molecules to recognize edges is exploited to achieve outline drawing from binary templates. Outlines of arbitrary curvature, several colours and thicknesses down to 1 mm are drawn in around 30 min or less by employing a common laboratory two-colour ultraviolet lamp. The outlines and the light dose-driven XOR logic with fluorescence output or ‘off–on–off’ action which is observed in the irradiated regions are modelled by combining foundational principles of photochemistry, acid–base neutralization and diffusion.     

Eco-friendly synthesis of ZnO nanorods using Cycas pschannae plant extract with excellent photocatalytic,antioxidant, and anticancer nanomedicine for lung cancer treatment

The tunable ZnO nanorods (NRs) are produced due to the phytochemicals present in Cycas pschannae leaves which act as reducing and stabilizing agents. The confirmations of the ZnO NRs were validated using different characterization techniques: X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer, Emmett and Teller (BET), scanning electron microscopy–Energy Dispersive X-Ray Analysis (EDX), UV–visible spectroscopy, Raman spectroscopy, and transmission electron microscopy. The ZnO NRs show unique surface area and low particle size. Photocatalytic activity was measured and found to be 50.75% at low concentrations and 78.33% at high concentrations. The antioxidant activity of the ZnO NRs also showed promising results for their use in free radical scavenging. In vitro toxicity studies using zebrafish embryos was performed to evaluate the toxic nature of it and the obtained result confirmed its non-toxic nature. In addition, ZnO anticancer potential was verified using the A549 lung cancer cell line. Cytotoxic assessments of ZnO NRs were performed via 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT), 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT), and neutral red uptake assays to examine the cell death cycle on the A549 lung cancer cell. Dose-dependent apoptosis and necrosis were confirmed by Lactate dehydrogenase (LDH) assay. It was also confirmed that ZnO NRs induce Reactive oxygen species (ROS) and apoptosis inside cancer (A549) cells via different intrinsic gene expression. Thus, based on this research it is evident that an effective ecofriendly, nontoxic potential anticancer drug can be synthesized using C. pschannae leaf extract.     

Investigation of carbon steel anodic dissolution in ammonium chloride solutions using electrochemical impedance spectroscopy

The anodic dissolution of carbon steel in ammonium chloride (NH₄Cl) solutions (5, 10, and 20 wt%) is investigated via various electrochemical techniques and other complementary techniques. The polarization measurements reveals that the carbon steel is susceptible to general corrosion. The impedance data taken at various overpotentials shows multiple loops, corresponding to capacitance, inductance, and negative capacitance, and the number of time constants observed is also not the same for various NH₄Cl concentrations. From reaction mechanism analysis, a multi-step reaction mechanism with three adsorbed intermediates and three dissolution paths (one chemical path and two electrochemical paths) is proposed to describe the observed patterns in impedance measurements. The surface coverage of intermediate species and the contribution of chemical reaction and electrochemical reaction to the overall corrosion rate are also estimated from the proposed model. The results obtained from field emission scanning electron microscopy and Raman spectroscopy measurements are also reported.     

Keggin-type heteropoly-11-molybdo-1-vanadophosphoric acid supported montmorillonite K-10 clay-catalysed one-pot multi-component synthesis of chromeno[2,3-b]indoles

One-pot three-component synthesis of twelve different chromeno[2,3-b]indole derivatives were achieved by the condensation of β-naphthol, oxindole and various substituted aldehydes. Two more chromeno[2,3-b]indole derivatives were also synthesized through one-pot two-component condensation of salicylaldehyde with oxindole/chlorooxindole. Both the condensations were achieved by using Keggin-type heteropoly-11-molybdo-1-vanadophosphoric acid, H₄[PVMo₁₁O₄₀] supported on montmorillonite K-10 clay for about 10% as catalyst under environmentally benign solvent-free reaction condition. Shorter reaction time, excellent yield of product, sustainability of catalytic material and simple workup procedure under green experimental conditions are the advantages of this protocol.

     

Development of Polar Organic Mode Chromatographic Method by Polysaccharide-Based Immobilized Chiral Selector and Validation for the Determination of the Enantiopurity of Novel Mineralocorticoid Receptor Antagonist Atropisomer–Esaxerenone

Esaxerenone is a new nonsteroidal mineralocorticoid receptor antagonist utilized to treat high blood pressure. Chemically, esaxerenone is a pyrrole derivative consisting of hindered rotation, which results in stereoisomers named atropisomers. Currently, no methods exist for the separation and quantification of these atropisomers. A new and accurate chiral liquid chromatographic technique was developed and validated to estimate the enantiomeric purity of esaxerenone. Polar organic chiral separation was carried out on an immobilized amylose-based chiral stationary phase (Chiralpak IG) with methanol:acetonitrile:diethylamine (9:1:0.1, v/v/v) mixture as a mobile phase. The total runtime was 15 min, and the resolution (R_s) between the atropisomers was more than 3.0. The detection and quantification thresholds for the R-atropisomer were found to be 0.03 and 0.1 µg mL^?1, respectively, for a test concentration of esaxerenone (1000 µg mL^?1). Over the range from the limit of quantification to 0.3 percent, the method's linearity for the R-atropisomer was excellent (R²?>?0.999). The R-atropisomer recovery varied from 95 to 102%, confirming the method’s good accuracy. For a 48-h research period, the chemical was shown to be stable.

     

A Facile One‐Pot Synthesis of Pyrrolo[1, 2‐a] Indoles by Intramolecular 1,3‐Dipolar Cycloaddition under Neat‐Microwave Irradiation

A straightforward and general approach for the stereoselective synthesis of fused pyrrolo[1,2‐a] indoles frameworks from>intramolecular 1,3‐dipolar cycloaddition using N‐alkylated Baylis–Hillman derivatives is presented. It was found that the cycloaddition proceeded efficiently under microwave irradiation in solvent‐free condition to afford highly stereoselective cycloadducts in good yield.     

A Facile Synthesis of 7,8-DI Aryl Coumarino and Flavano Benzo-Thiophenes

The key step for the synthesis of 7-hydroxy 2,3-diarylsubstituted benzothiophenes 5a-f , by starting from substituted 2-aryl-2-((2-methoxy phenyl)thio)acetophenones 3a-f as an intermediate, consists of a Friedel-Crafts cyclization followed by demethylation by Lewis acids like BF 3 OEt 2 and AlCl 3 in DCM.     

Aqueous media preparation of 2-amino-4,6-diphenylnicotinonitriles using cellulose sulfuric acid as an efficient catalyst

A convenient approach to the synthesis of 2-amino-4,6-diphenylnicotinonitriles via four-component reaction of aromatic aldehydes, acetophenone derivatives, malononitrile and ammonium acetate is described. The reactions were done in water as solvent using cellulose sulfuric acid as catalyst. This simple protocol offer advantages such as shorter reaction times, simple work-up procedure, excellent yields and catalyst recovery.     

Synthesis of glucosylspiro-oxindole derivatives via one-pot three-component cycloaddition of azomethine ylides

Highly regio- and stereoselective synthesis of glucosylspiro-oxindole/acenaphthenone derivatives was accomplished through 1,3-dipolar cycloaddition (1,3-DC) reaction. The glucosyl α,β-unsaturated-7,3-lactone (a sugar lactone) derived from d-glucose was used as a chiral dipolarophile in 1,3-DC reaction for the first time. The azomethine ylides generated from sarcosine/l-proline/thiazolidine-4-carboxylic acid/piperidine-2-carboxylic acid with isatin and acenaphthoquinone were trapped by the sugar lactone to give a series of glucosylspiro-pyrrolidine derivatives in good yields.