Surface modification of nanoporous alumina surfaces with poly(ethylene glycol)

Nanoporous alumina surfaces have a variety of applications in biosensors, biofiltration, and targeted drug delivery. However, the fabrication route to create these nanopores in alumina results in surface defects in the crystal lattice. This results in inherent charge on the porous surface causing biofouling, that is, nonspecific adsorption of biomolecules. Poly(ethylene glycol) (PEG) is known to form biocompatible nonfouling films on silicon surfaces. However, its application to alumina surfaces is very limited and has not been well investigated. In this study, we have covalently attached PEG to nanoporous alumina surfaces to improve their nonfouling properties. A PEG-silane coupling technique was used to modify the surface. Different concentrations of PEG for different immobilization times were used to form PEG films of various grafting densities. X-ray photoelectron spectroscopy (XPS) was used to verify the presence of PEG moieties on the alumina surface. High-resolution C1s spectra show that with an increase in concentration and immobilization time, the grafting density of PEG also increases. Further, a standard overlayer model was used to calculate the thickness of PEG films formed using the XPS intensities of the Al2p peaks. The films formed by this technique are less than 2.5 nm thick, suggesting that such films will not clog the pores which are in the range of 70-80 nm.     

Numerical Investigation of Graphene as a Back Surface Field Layer on the Performance of Cadmium Telluride Solar Cell

This paper numerically explores the possibility of ultrathin layering and high efficiency of graphene as a back surface field (BSF) based on a CdTe solar cell by Personal computer one-dimensional (PC1D) simulation. CdTe solar cells have been characterized and studied by varying the carrier lifetime, doping concentration, thickness, and bandgap of the graphene layer. With simulation results, the highest short-circuit current (I_sc = 2.09 A), power conversion efficiency (η = 15%), and quantum efficiency (QE~85%) were achieved at a carrier lifetime of 1 × 10³ μs and a doping concentration of 1 × 10¹⁷ cm⁻³ of graphene as a BSF layer-based CdTe solar cell. The thickness of the graphene BSF layer (1 μm) was proven the ultrathin, optimal, and obtainable for the fabrication of high-performance CdTe solar cells, confirming the suitability of graphene material as a BSF. This simulation confirmed that a CdTe solar cell with the proposed graphene as the BSF layer might be highly efficient with optimized parameters for fabrication.     

Phenothiazine–BODIPY–Fullerene Triads as Photosynthetic Reaction Center Models: Substitution and Solvent Polarity Effects on Photoinduced Charge Separation and Recombination

Novel photosynthetic reaction center model compounds of the type donor₂–donor₁–acceptor, composed of phenothiazine, BF₂‐chelated dipyrromethene (BODIPY), and fullerene, respectively, have been newly synthesized using multistep synthetic methods. X‐ray structures of three of the phenothiazine‐BODIPY intermediate compounds have been solved to visualize the substitution effect caused by the phenothiazine on the BODIPY macrocycle. Optical absorption and emission, computational, and differential pulse voltammetry studies were systematically performed to establish the molecular integrity of the triads. The N‐substituted phenothiazine was found to be easier to oxidize by 60 mV compared to the C‐substituted analogue. The geometry and electronic structures were obtained by B3LYP/6‐31G(dp) calculations (for H, B, N, and O) and B3LYP/6‐31G(df) calculations (for S) in vacuum, followed by a single‐point calculation in benzonitrile utilizing the polarizable continuum model (PCM). The HOMO?1, HOMO, and LUMO were, respectively, on the BODIPY, phenothiazine and fullerene entities, which agreed well with the site of electron transfer determined from electrochemical studies. The energy‐level diagram deduced from these data helped in elucidating the mechanistic details of the photochemical events. Excitation of BODIPY resulted in ultrafast electron transfer to produce PTZ–BODIPY^.+–C₆₀^.?; subsequent hole shift resulted in PTZ^.+–BODIPY–C₆₀^.? charge‐separated species. The return of the charge‐separated species was found to be solvent dependent. In nonpolar solvents the PTZ^.+–BODIPY–C₆₀^.? species populated the ³C₆₀* prior to returning to the ground state, while in polar solvent no such process was observed due to relative positioning of the energy levels. The ¹BODIPY* generated radical ion‐pair in these triads persisted for few nanoseconds due to electron transfer/hole‐shift mechanism.     

Nickel‐Catalyzed α‐Carbonylalkylarylation of Vinylarenes: Expedient Access to γ,γ‐Diarylcarbonyl and Aryltetralone Derivatives

We report a Ni‐catalyzed regioselective α‐carbonylalkylarylation of vinylarenes with α‐halocarbonyl compounds and arylzinc reagents. The reaction works with primary, secondary, and tertiary α‐halocarbonyl molecules, and electronically varied arylzinc reagents. The reaction generates γ,γ‐diarylcarbonyl derivatives with α‐secondary, tertiary, and quaternary carbon centers. The products can be readily converted to aryltetralones, including a precursor to Zoloft, an antidepressant drug.     

Catalytic Enantioselective 1,3‐Alkyl Shift in Alkyl Aryl Ethers: Efficient Synthesis of Optically Active 3,3′‐Diaryloxindoles

Reported is the first organocatalytic asymmetric 1,3‐alkyl shift in alkyl aryl ethers for the synthesis of chiral 3,3′‐diaryloxindoles using a chiral Brønsted acid catalyst. Preliminary results showed that each enantiomer of the 3,3′‐diaryloxindole, and a racemic mixture, showed different antiproliferative activities against HeLa cell lines by using an MTT assay.     

Brain-derived neurotrophic factor modulation of Kv1.3 channel is disregulated by adaptor proteins Grb10 and nShc

Background  

Neurotrophins are important regulators of growth and regeneration, and acutely, they can modulate the activity of voltage-gated ion channels. Previously we have shown that acute brain-derived neurotrophic factor (BDNF) activation of neurotrophin receptor tyrosine kinase B (TrkB) suppresses the Shaker voltage-gated potassium channel (Kv1.3) via phosphorylation of multiple tyrosine residues in the N and C terminal aspects of the channel protein. It is not known how adaptor proteins, which lack catalytic activity, but interact with members of the neurotrophic signaling pathway, might scaffold with ion channels or modulate channel activity.     

Biocompatible Crosslinked Nanofibers of Poly(Vinyl Alcohol)/Carboxymethyl‐Kappa‐Carrageenan Produced by a Green Process

This study presents a new type of biocompatible nanofiber based on poly(vinyl alcohol) (PVA) and carboxymethyl‐kappa‐carrageenan (CMKC) blends, produced with no generation of hazardous waste. The nanofibers are produced by electrospinning using PVA:CMKC blends with ratios of 1:0, 1:0.25, 1:0.4, 1:0.5, and 1:0.75 (w/w PVA:CMKC) in aqueous solution, followed by thermal crosslinking. The diameter of the fibers is in the nanometer scale and below 300 nm. Fourier transform infrared spectroscopy shows the presence of the carboxyl and sulfate groups in all the fibers with CMKC. The nanofibers from water‐soluble polymers are stabilized by thermal crosslinking. The incorporation of CMKC improves cytocompatibility, biodegradability, cell growth, and cell adhesion, compared to PVA nanofibers. Furthermore, the incorporation of CMKC modulates phenotype of human adipose‐derived stem cells (ADSCs). PVA/CMKC nanofibers enhance ADSC response to osteogenic differentiation signals and are therefore good candidates for application in tissue engineering to support stem cells.     

Magnetism and candidate muon-probe sites in RBa2Cu3O y

Key results of zero-field (ZF) and transverse-field (TF) muon-spin-relaxation (μSR) experiments on superconducting and insulating RBa₂Cu₃O _y (R123 _y , with R=Eu, Gd, Pr and Pr/Y:y=6, 7) are examined. The chemical behavior of the positive muon probe is addressed, and muon-oxygen bonding is shown to occur in all these cuprates. To explain magnetic fields at muon-probe sites in Pr _x Y_1−x Ba₂Cu₃O _y (0<=x<0.5,y=7 andx=0,y=6) samples, improvements on the reported magnetic structures from neutron diffraction are necessary. Cu magnetism in Pr123y (y=6,7) is observed belowT _N1, which is near RT. The magnetism seen belowT _N2 can be interpreted assuming an additional ordering in the Cutt-O chain layers. Alternatively, Pr ordering is also considered as the cause of the second phase transition. Considering the specific muon-probe location, a more detailed interpretation can be provided for the μSR parameters, measured in the normal and mixed states of these unconventional superconductors.     

Étude par rm13c d'alcaloïdes à squelette acridinone 9(10h) et pyrido(4,3b) carbazole(6h)

Both synthetic and natural acridinone and pyridocarbazole alkaloids have been studied by ¹³C NMR and simple model systems used for comparison.