Influence of interparticle interactions on the kinetics of self-assembly and mechanical strength of nanoparticulate aggregates

Computer simulations based on Discrete Element Method have been performed in order to investigate the influence of interparticle interactions on the kinetics of self-assembly and the mechanical strength of nanoparticle aggregates.Three different systems have been considered.In the first system the interaction between particles has been simulated using the JKR (Johnson,Kendall and Roberts) contact theory,while in the second and third systems the interaction between particles has been simulated using van der Waals and electrostatic forces respectively.In order to compare the mechanical behaviour of the three systems,the magnitude of the maximum attractive force between particles has been kept the same in all cases.However,the relationship between force and separation distance differs from case to case and thus,the range of the interparticle force.The results clearly indicate that as the range of the interparticle force increases,the self-assembly process is faster and the work required to produce the mechanical failure of the assemblies increases by more than one order of magnitude.     

JT-60U装置温度分布剖面不变性的实验研究

在一系列H模放电条件下，建立了一个旨在研究等离子体温度分布剖面不变性的数据库。介绍了数据库建立过程中要解决的关键问题和所用软件，对等离子体温度分布剖面不变性及芯部约束与边缘参数的关系进行了研究。     

Polyhedral oligomeric silsesquioxanes: a new class of amphiphiles at the air/water interface

Insoluble films of trisilanolisobutyl-POSS and octaisobutyl-POSS at the air/water interface are investigated by means of surface pressure - area per molecule isotherm (Pi - A) and Brewster angle microscopy (BAM). Analysis of the experimental results shows the partial cage molecule, trisilanolisobutyl-POSS, is a surface-active molecule that self-assembles into uniform monolayer upon compression; but the fully condensed cage molecule, octaisobutyl-POSS, is nonamphiphilic.     

Polyhedral oligomeric silsesquioxane amphiphiles: isotherm and brewster angle microscopy studies of trisilanolisobutyl-POSS at the air/water interface

A trisilanol derivative of polyhedral oligomeric silsesquioxanes (POSS), trisilanolisobutyl-POSS, has recently been reported to form stable monolayers at the air/water interface. Moreover, the trisilanolisobutyl-POSS monolayer undergoes a nonequilibrium structural transition (collapse) around a surface pressure of Rho approximately 18 mN.m(-1). This paper explores the mono- and multilayer properties of POSS molecules at the air/water interface by the Wilhelmy plate technique and Brewster angle microscopy. Surface concentrations are controlled by four mechanisms: (1) compression at a constant rate, (2) stepwise compression followed by surface pressure relaxation to an "equilibrium" value, (3) successive additions of spreading solution followed by relaxation to a stable surface pressure value, and (4) hysteresis loops to test the reversibility of the structural transitions. Results show that both an increasing compression rate and a decreasing temperature lead to an increase in the surface pressure of the structural transition, which is consistent with the formation of solidlike multilayer domains during the collapse process. For the case of compression at a constant rate, small domains initially form and later aggregate to form large solid masses. Cessation of compression allows these large solid masses to relax into equilibrium ringlike structures with a lower surface pressure, Rho approximately 13 mN.m(-1). In contrast, if the film is expanded rapidly, these large solidlike domains relax into "spaghetti" like networks with a residual surface pressure that depends on the initial amount of the solidlike collapsed phase. Finally, successive addition and stepwise compression isotherm experiments lead to different and time-dependent morphologies. Understanding these surface properties of POSS molecules affords an excellent opportunity to design and study POSS/polymer blends for coating applications where POSS molecules with rigid inorganic cores, soft organic coronae, and dimensions comparable to polymeric monolayers can serve as perfectly monodisperse nanofillers.     

Performance of slotted pores in particle manufacture using rotating membrane emulsification

This paper addresses the use of different slotted pores in rotating membrane emulsification technology.Pores of square and rectangular shapes were studied to understand the effect of aspect ratio (1-3.5) and their orientation on oil droplet formation.Increasing the membrane rotation speed decreased the droplet size,and the oil droplets produced were more uniform using slotted pores as compared to circular geometry.At a given rotation speed,the droplet size was mainly determined by the pore size and the fluid velocity of oil through the pore (pore fluid velocity).The ratio of droplet diameter to the equivalent diameter of the slotted pore increased with the pore fluid velocity.At a given pore fluid velocity and rotation speed,pore orientation significantly influences the droplet formation rate: horizontally disposed pores (with their longer side perpendicular to the membrane axis) generate droplets at double the rate of vertically disposed pores.This work indicates practical benefits in the use of slotted membranes over conventional methods.     

Predicting thermal conductivity of liquid suspensions of nanoparticles (nanofluids) based on rheology

A methodology is proposed for predicting the effective thermal conductivity of dilute suspensions of nanoparticles (nanofluids) based on rheology.The methodology uses the rheological data to infer microstructures of nanoparticles quantitatively,which is then incorporated into the conventional Hamilton-Crosser equation to predict the effective thermal conductivity of nanofluids.The methodology is experimentally validated using four types of nanofluids made of titania nanoparticles and titanate nanotubes dispersed in water and ethylene glycol.And the modified Hamilton-Crosser equation successfully predicted the effective thermal conductivity of the nanofluids.     

Nanoporous metal organic framework materials for hydrogen storage

Hydrogen is expected to play an important role in future transportation as a promising alternative clean energy source to carbon-based fuels.One of the key challenges to commercialize hydrogen energy is to develop appropriate onboard hydrogen storage systems,capable of charging and discharging large quantities of hydrogen with fast enough kinetics to meet commercial requirements.Metal organic framework (MOF) is a new type of inorganic and organic hybrid nanoporous particulate materials.Its diverse networks can enhance hydrogen storage through tuning the structure and property of MOFs.The MOF materials so far developed adsorb hydrogen through weak disperston interactions,which allow significant quantity of hydrogen to be stored at cryogenic temperatures with fast kinetics.Novel MOFs are being developed to strengthen the interactions between hydrogen and MOFs in order to store hydrogen under ambient conditions.This review surveys the development of such candidate materials,their performance and future research needs.