Thermal,morphostructural and spectrometric characterization of an antibacterial kaolinite-based filter modified with silver for water treatment

Journal of Thermal Analysis and Calorimetry - The aim of this work is to synthesize and characterize a new structured silver–clay dried, calcined or sintered at different temperatures...     

Thermal studies on protein isolates of white lupin seeds (<Emphasis Type="Italic">Lupinus albus</Emphasis>)

This study used TG, DSC, and SDS-PAGE techniques to study protein isolates (PIs) in the powder form obtained from lupin seeds flour Lupinus albus. Different methods of preparing PIs were tested, resulting in final products that were different only in relation to the yield and protein content. The results of the protein analysis by SDS-PAGE showed that the same protein fractions were present in the lupin seeds and in the obtained PIs. This result shows that the process of extraction was not damaging to the composition of the original protein. On the other hand, the results of the thermal analysis (DSC and TG–DTG curves) obtained for the different PIs, led to the detection of changes in the protein conformation through the ΔH values, which in general decreased with increasing values of pH and ionic strength in the experimental conditions of extraction.     

DSC studies on protein isolate of guava seeds <Emphasis Type="Italic">Psidium guajava</Emphasis>

Glutelin, the major protein fraction from guava seed, was obtained by fractioning as described by Osborne. The total proteins were extracted and the isolates obtained by isoelectric precipitation presented similar DSC curves, concordant with the results obtained by gel filtration chromatography and electrophoresis in polyacrylamide gel (PAGE-SDS). However, the DSC curves showed a higher enthalpy with regard to the denaturing protein isolate (PI) extracted at pH 10.0 when compared to a PI at pH 11.5. Such results are in accordance with those obtained for PI extracted at pH 10.0 using chromatography, this one being present in the form of molecular aggregates of greater molecular mass. The glutelin fraction, however, did not present a denaturation peak in the DSC curve, showing that the process for obtaining the same significantly altered its conformation.     

Effects of the structure of anionic polyelectrolytes on surface potentials of their aggregates in water

The surface potential, ψ in mV, was determined for the following polyelectrolytes and co-polyelectrolytes in aqueous solution: sodium poly(styrene sulfonate); sodium poly(vinyl sulfonate); poly(vinyl alcohol-co-55% sodium vinyl sulfate); poly(methylmethacrylate-co-40% sodium styrene sulfonate); poly (methylmethacrylate-co-60% sodium styrene sulfonate); poly(styrene-co-56% styrene sulfonate); and poly(styrene-co-80% styrene sulfonate). For comparison, the surface potentials of aqueous sodium dodecyl sulfate and sodium dodecylbenzene sulfonate micelles were also determined. The dyes neutral red and safranine-T were used as indicators. ThepKa of the former was calculated from the Henderson-Hasselbach equation, using UV-VIS spectroscopy to determine the concentration of protonated ground state as a function of pH. The surface potential of the aggregates was culculated from the equation: $$pKa_{\text{i}} = pKa_0 - {{F\Psi } \mathord{\left/ {\vphantom {{F\Psi } {2.3RT}}} \right. \kern-\nulldelimiterspace} {2.3RT}}$$ wherepKa _i andpKa _o refer to the indicatorpKa in the presence of charged and nonionic interfaces, respectively, and the other terms have their usual meaning. The protonation kinetics of the triplet state of safranine-T (measured from the decay of its transient absorption at 830 nm) was used to determine hydronium ion concentrations at aggregate interfaces, and the corresponding surface potentials were calculated from: $$a_{{\text{Hi}}} = a_{{\text{Haq}}} \times \exp \left( {{{ - F\Psi } \mathord{\left/ {\vphantom {{ - F\Psi } {RT}}} \right. \kern-\nulldelimiterspace} {RT}}} \right)$$ wherea _Hi anda _Haq refer to the hydronium ion activity at the aggregate interface, and in bulk water, respectively. Surface potentials determined by both techniques were in excellent agreement. Values of ψ were found to depend on the structure of the polyelectrolyte, sodium poly(styrene sulfonate) versus sodium poly(vinyl sulfonate) and, for the same type of co-polyelectrolyte, on the percentage of charged monomer.     

Thermal behaviour of intercalated 8-hydroxyquinoline (oxine) in montmorillonite clay

The composite montmorillonite-8-hydroxyquinoline (Swy-1-8-HQ) was prepared by two different processes and studied by using thermogravimetric analysis (TG/DTG and DSC), as well as helpful techniques as fluorescence in the UV-visible region and X-ray diffraction. The composites developed fluorescent appearance, however with quantum poor efficiency and they exhibited distinct TG and DSC thermal behavior. The fluorescence data of spectra associated to the TG/DT curves allowed to suggest that the 8-HQ was present in the composites in two different circumstances: 1 - intercalated in the interlayer spaces (Swy-1-8-HQ2), rigidly associated to the substrate feasible as a monolayer with the aromatic rings parallel to the silica layer; and/or, 2 - adsorbed on the surface (Swy-1-8-HQ1), either as a bilayer formation or tilting of the molecules to the silicate layer sheet. All results confirmed above are in agreement with X-ray diffraction patterns, once the interlayer space increases when 8-HQ is incorporated. The experimental results confirm the formation of the composites in agreement with the method used in the preparation. This revised version was published online in August 2006 with corrections to the Cover Date.     

Efficient Heck arylations of cyclic and acyclic acrylate derivatives using arenediazonium tetrafluoroborates. A new synthesis of the antidepressant drug (+/-)-paroxetine

[reaction: see text] The Heck arylation of acyclic- and cyclic-substituted acrylates using several arenediazonium tetrafluoroborates was investigated. Arylations were carried out under aerobic, ligand-free conditions to provide the corresponding substituted acrylates in moderate to high isolated yields. Heck arylations were usually completed in less than 2 h in refluxing methanol. The aza-endocyclic acrylate derivative 11a was converted into the antidepressant drug (+/-)-paroxetine in a concise new route in good overall yield.     

An improved LC‐MS/MS method for quantitation of indapamide in whole blood: application for a bioequivalence study

An improved LC‐MS/MS method for the quantitation of indapamide in human whole blood was developed and validated. Indapamide‐d3 was used as internal standard (IS) and liquid–liquid extraction was employed for sample preparation. LC separation was performed on Synergi Polar RP‐column (50 × 4.6 mm i.d.; 4 µm) and mobile phase composed of methanol and 5 mm aqueous ammonium acetate containing 1 mm formic acid (60:40), at flow rate of 1 mL/min. The run time was 3.0 min and the injection volume was 20 μL. Mass spectrometric detection was performed using electrospray ion source in negative ionization mode, using the transitions m/z 364.0 → m/z 188.9 and m/z 367.0 → m/z 188.9 for indapamide and IS, respectively. Calibration curve was constructed over the range 0.25–50 ng/mL. The method was precise and accurate, and provided recovery rates >80% for indapamide and IS. The method was applied to determine blood concentrations of indapamide in a bioequivalence study with two sustained release tablet formulations. The 90% confidence interval for the geometric mean ratios for maximum concentration was 95.78% and for the area under the concentration–time curve it was 97.91%. The tested indapamide tablets (Eurofarma Laboratórios S.A.) were bioequivalent to Natrilix®, according to the rate and extent of absorption. Copyright © 2014 John Wiley & Sons, Ltd.     

The first 3-D ferrimagnetic nickel fumarate with an open framework: [Ni3(OH)2(O2C-C2H2-CO2)(H2O)4].2H2O

A three-dimensional nickel fumarate has been isolated by hydrothermal reaction and its structure solved from powder X-ray diffraction; its organisation reveals an unusual topology not previously seen in nickel chemistry and provided a scarce ferrimagnetic behaviour below 20 K.     

A new approach for the total synthesis of spilanthol and analogue with improved anesthetic activity

A 5-step synthesis of spilanthol (affinin) is reported, where the route features complete control of alkene geometry during the assembling of the double bonds, with the use of a Sonogashira cross-coupling reaction, a Z-selective alkyne semi-reduction and a HWE olefination reaction as the key steps. A simplified analogue was also prepared in 4 steps. Both compounds were found to permeate dermatomed pig ear skin through an in vitro Franz-type diffusion cell. The simplified analogue presented a superior anesthetic effect in vivo, using the tail flick model, when compared to spilanthol and to the commercial standard EMLA^®. These results suggest that both spilanthol and its analogue could be useful as a topical anesthetic in clinical practice.