Insights into the N-terminal Cu(II) and Cu(I) binding sites of the human copper transporter CTR1

Abstract

Copper transporter 1 (CTR1) is the main copper transporter in the eukaryotic system. CTR1 has several important roles: It binds Cu(II) ions that are present in the blood; it reduces those Cu(II) ions to Cu(I); and it subsequently transfers Cu(I) to the cytoplasmic domain, where the ion is delivered to various cellular pathways. Here, we seek to identify CTR1 binding sites for Cu(II) and Cu(I) and to shed light on the Cu(II)-to-Cu(I) reduction process. We focus on the first 14 amino acids of CTR1. This N-terminal segment is rich with histidine and methionine residues, which are known to bind Cu(II) and Cu(I), respectively; thus, this region has been suggested to have an important function in recruiting Cu(II) and reducing it to Cu(I). We utilize electron paramagnetic resonance (EPR) spectroscopy together with nuclear magnetic resonance (NMR) and UV-VIS spectroscopy and alanine substitution to reveal Cu(II) and Cu(I) binding sites in the focal 14-amino-acid segment. We show that H5 and H6 directly coordinate to Cu(II), whereas M7, M9, and M12 are involved in Cu(I) binding. This research is another step on the way to a complete understanding of the cellular copper regulation mechanism in humans.     

Thermal processes in the systems with Li-battery cathode materials and LiPF6 -based organic solutions

Thermodynamic instability of positive electrodes (cathodes) in Li-ion batteries in humid air and battery solutions results in capacity fading and batteries degradation, especially at elevated temperatures. In this work, we studied thermal interactions between cathode materials Li₂MnO₃, xLi₂MnO₃ ^.(1???x)Li(MnNiCo)O₂,LiNi_0.33Mn_0.33Co_0.33O₂, LiNi_0.4Mn_0.4Co_0.2O₂, LiNi_0.8Co_0.15Al_0.05O₂ LiMn_1.5Ni_0.5O₄, LiMn(or Fe)PO₄, and battery solutions containing ethylene carbonate (EC) or propylene carbonate (PC), dimethyl carbonate (DMC) or ethylmethyl carbonate (EMC) and LiPF₆ salt in the temperature range of 40–400 °C. It was found that these materials are stable chemically and well performing in LiPF₆-based solutions up to 60 °C. The thermal decomposition of the electrolyte solutions starts >180 °C. The macro-structural transformations of cathode materials upon exothermic reactions were studied by transmission electron microscopy (TEM), X-ray difraction (XRD) and Raman spectroscopy. Differential scanning calorimetry (DSC) studies have shown that the exothermic reactions in the temperature range of 60–140 °C lead to partial decomposition of both the cathode material and electrolyte solution. The systems thus formed consisted of partially decomposed solutions and partially chemically delithiated cathode materials covered by reactions products. Thermal reactions terminate and this system reaches equilibrium at about 120 °C. It remains stable up to the beginning of the solution decomposition at about 180 °C. The increased content of surface Li₂CO₃ is found to significantly affect the thermal processes at high temperature range due to extensive exothermic decomposition at low temperatures.     

Molecularly imprinted hydrogel displaying reduced non‐specific binding and improved protein recognition

A novel approach for enhancing protein recognition in molecularly imprinted hydrogel (MIH) is presented. This approach was developed based on the hypothesis that the number of specific binding sites created in the previously described MIH is very small, thus attempts to enhance the capacity result in most cases in additional non‐specific binding and loss of selectivity. Thus, blocking the non‐specific binding sites could lead to higher capacities and better selectivity. To test this hypothesis, MIH interpenetrating networks designed to block non‐specific binding sites were synthesized using two separate stages of polymerization. Re‐binding of the template protein (lysozyme) and a competitor protein (cytochrome C) was measured, and the results were compared with the similar experiment performed using a control non‐imprinted hydrogel and a “conventional” MIH. The imprinting efficacy of the MIH interpenetrating network was found to be much higher than that of the controls. Furthermore, competitive adsorption assays have demonstrated the superiority of the new formulation.     

Effect of fluoroethylene carbonate (FEC) on the performance and surface chemistry of Si-nanowire Li-ion battery anodes

The effect of FEC as a co-solvent on the electrochemical performance and surface chemistry of silicon nanowire (SiNW) anodes was thoroughly investigated. Enhanced electrochemical performance was observed for SiNW anodes in alkyl carbonates electrolyte solutions containing fluoroethylene carbonate (FEC). Reduced irreversible capacity losses accompanied by enhanced and stable reversible capacities over prolonged cycling were achieved with FEC-containing electrolyte solutions. TEM studies provided evidence for the complete and incomplete lithiation of SiNW's in FEC-containing and FEC-free electrolyte solutions, respectively. Scanning electron microscopy (SEM) results proved the formation of much thinner and compact surface films on SiNW's in FEC-containing solutions. However, thicker surface films were identified for SiNW electrodes cycled in FEC-free solutions. SiNW electrodes develop lower impedance in electrolyte solutions containing FEC in contrast to standard (FEC-free) solutions. The surface chemistry of SiNW electrodes cycled in FEC-modified and standard electrolytes were investigated using X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy. The impact of FEC as a co-solvent on the electrochemical behavior of SiNW electrodes is discussed herein in light of the spectroscopic and microscopic studies.     

Characterizations of self-combustion reactions (SCR) for the production of nanomaterials used as advanced cathodes in Li-ion batteries

In this work, self-combustion reactions (SCR) for the preparation of important cathode materials for rechargeable Li-ion batteries were investigated by thermal analytical tools (DSC, ARC, TGA), electron microscopy, XRD, various spectroscopies (MS, Raman, FTIR) and elemental analysis by ICP. The systems studied include solutions containing metal nitrates at the right stoichiometry and sucrose as a fuel, for the preparation of LiMn_0.5Ni_0.5O₂ (layered), LiMn_1.5Ni_0.5O₄ (spinel), LiMn_0.33Ni_0.33Co_0.33O₂ (layered), and LiMn_0.4Ni_0.4Co_0.2O₂ (layered). Similar products, which do not depend on the atmosphere of the processes (air or inert) were obtained by spontaneous SCR and the gradual heating of the same solutions by DSC, ARC, and TGA. The reactions involve the partial caramelization of sucrose, complicated by red-ox reactions with the nitrates that form solid products, whose organic part is finally decomposed around 400 °C. The presence of cobalt ions has a stabilizing effect, which is expressed by the low dissolution rates of Li ions from the solid products thus formed, into aqueous solutions. The reaction mechanisms are discussed herein.     

Atomic layer deposition of metal-oxide thin films on cellulose fibers

Abstract

Atomic layer deposition (ALD) is a vapor-phase technique capable of producing inorganic thin films with precise control over the thickness of the film. The ALD method offers high precision in the design of advanced 3D nanostructures. In this article, silica and alumina thin films have been grown over fibers of cellulose by the ALD process. The morphology and the chemical composition of the fabricated thin films are characterized, as well as their thermal durability through elevated temperatures. Moreover, XPS is used to confirm the phases of the alumina nanofilms and to further understand the deposition process on the cellulose microfibers.     

Eradication of Gram‐Positive and Gram‐Negative Bacteria by Photosensitizers Immobilized in Polystyrene

Immobilization of photosensitizers in polymers opens prospects for their continuous and reusable application. Methylene blue (MB) and Rose Bengal were immobilized in polystyrene by mixing solutions of the photosensitizers in chloroform with a polymer solution, followed by air evaporation of the solvent. This procedure yielded 15–140 μm polymer films with a porous surface structure. The method chosen for immobilization ensured 99% enclosure of the photosensitizer in the polymer. The antimicrobial activity of the immobilized photosensitizers was tested against Gram‐positive and Gram‐negative bacteria. It was found that both immobilized photosensitizers exhibited high antimicrobial properties, and caused by a 1.5–3 log₁₀ reduction in the bacterial concentrations to their total eradication. The bactericidal effect of the immobilized photosensitizers depended on the cell concentration and on the illumination conditions. Scanning electron microscopy was used to prove that immobilized photosensitizers excited by white light caused irreversible damage to microbial cells. Photosensitizers immobilized on a solid phase can be applied for continuous disinfection of wastewater bacteria.