Dipolar and V-shaped structures incorporating methylenepyran and diazine fragments

Thirteen novel dipolar and V-shaped chromophores with pyranylidene electron-donating part, diazine electron-withdrawing part and various π-linkers were synthesized. The extent of intramolecular charge transfer, structure-property relationships and optical properties were further investigated by UV/Vis absorption, electrochemistry, and DFT calculations.     

Spectroscopic Properties and Laser Induced Fluorescence Determination of Some Endocrine Disrupting Compounds

This work presents spectroscopic properties of some Endocrine Disrupting Compounds (EDCs), frequently found in food and in natural water. Studied molecules belong to the groups of phenolic and phthalate EDCs. In a first part, we have examined their absorption and fluorescence properties. Fluorescence emission wavelengths are about 300 nm for phenolic compounds and 360 nm for phtalate compounds; main excitation wavelengths being comprised between 210 nm and 230 nm. Fluorescence lifetimes measured are short (about 4 ns) and the fluorescence quantum yield has been determined. In a second part, to avoid the time consuming solvent extraction step, an analytical application to evaluate the performance of a direct analysis by laser induced fluorescence spectroscopy of ECDs traces in tap water and in raw water is presented. Good detection limits have been obtained, i.e.: 0.35 μg.L⁻¹ of chlorophenol in tap water, which are always lower than the reported Predictive Non Efficient Concentration (PNEC).     

Novel model of FM-noise conversion in a UMZI using RF external phase modulation of lasers: Theoretical and experimental results

In this paper, we propose and demonstrate a new and original model for theoretical calculation and experimental measurement of the noise power spectral density (NPSD) in phase-modulated optical links. The phase modulation is operated in the RF frequency range by an external phase modulator. The NPSD is derived for the first time in interferometric systems, by considering all effects such as the 1/f FM noise of the laser and white noise applied to light from a 1550 nm DFB laser, with phase modulation. The results show for the first time the influence of the phase modulation index, modulation frequency and interferometric delay in the phase-to-intensity noise conversion. The experimental and simulation results of conversion of FM-noise to intensity noise in an optical link by considering the external RF phase modulation are shown with good agreement.     

Improvement of direct determination of Cu and Mn in seawater by GFAAS and total elimination of the saline matrix with the use of hydrofluoric acid

Hydrofluoric acid, added to seawater, can assist in the removal of chloride in the drying step by precipitating fluoride salts, thus suppressing the chloride interference effects induced on the atomization signals of Cu and Mn. By adding HF to seawater before the analysis, MgF₂ and CaF₂ are precipitated at the bottom of the sampling flask, without precipitating Cu and Mn, and are consequently not introduced into the graphite furnace. Because sodium salts are eliminated at the pretreatment step, the whole seawater matrix is eliminated before the atomization of Cu or Mn. Therefore, the analyzed volume of seawater can be increased by using the multi-injection procedure without degradation of the limit of detection and risks of spectral interferences. The limit of detection obtained for Cu and Mn are 0.05 and 0.01 μg L⁻¹, respectively, for a 50 μL analyzed seawater volume.     

La matrice eau de mer et le signal du cuivre en spectrometrie d'adsorption atomique sans flamme : Partie 1: Etude de l'influence des principaux composants

(Copper signals from seawater matrices in electrothermal atomic absorption spectrometry. Part 1: study of the effects of principal inorganic ions.)The effects of the main inorganic ions of seawater (Na⁺, Mg²⁺, Ca²⁺, Cl^?, SO^2?₄), and of nitrate as modifier, on the electrothermal atomic absorption spectrometric signal of copper are studied. Sodium chloride, sulfate or nitrate, magnesium chloride or nitrate, and calcium chloride can cause serious interferences. Thermal treatment at about 700°C prevents the interference of MgCl₂ by its hydrolysis. Ashing can be done without loss of copper at higher temperatures in the presence of sulfate salts (1300°C) and nitrate salts (1200°C) than in the presence of chloride salts (1100°C). This is ascribed to the stabilising effect of oxides and sulfides. A study of the influence of two-component matrices, MCl-MNO₃ or MCl-MSO₄, on the atomization signal of copper confirms this stabilizing effect which adds to the decrease in interference connected with removal of chloride in acidic medium.     

Speciation of major arsenic species in seawater by flow injection hydride generation atomic absorption spectrometry

Arsenic present at 1 μg L^–1 concentrations in seawater can exist as the following species: As(III), As(V), monomethylarsenic, dimethylarsenic and unknown organic compounds. The potential of the continuous flow injection hydride generation technique coupled to atomic absorption spectrometry (AAS) was investigated for the speciation of these major arsenic species in seawater. Two different techniques were used. After hydride generation and collection in a graphite tube coated with iridium, arsenic was determined by AAS. By selecting different experimental hydride generation conditions, it was possible to determine As(III), total arsenic, hydride reactive arsenic and by difference non-hydride reactive arsenic. On the other hand, by cryogenically trapping hydride reactive species on a chromatographic phase, followed by their sequential release and AAS in a heated quartz cell, inorganic As, MMA and DMA could be determined. By combining these two techniques, an experimental protocol for the speciation of As(III), As(V), MMA, DMA and non-hydride reactive arsenic species in seawater was proposed. The method was applied to seawater sampled at a Mediterranean site and at an Atlantic coastal site. Evidence for the biotransformation of arsenic in seawater was clearly shown.     

Molecular Lanthanide Switches for Magnetism and Photoluminescence

Solvation of [(CNT)Ln(η⁸-COT)] (Ln=La, Ce, Nd, Tb, Er; CNT=cyclononatetraenyl, i.e., C₉H₉⁻; COT=cyclooctatetraendiid, i.e., C₈H₈²⁻) complexes with tetrahydrofuran (THF) gives rise to neutral [(η⁴-CNT)Ln(thf)₂(η⁸-COT)] (Ln=La, Ce) and ionic [Ln(thf)_x(η⁸-COT)][CNT] (x=4 (Ce, Nd, Tb), 3 (Er)) species in a solid-to-solid transformation. Due to the severe distortion of the ligand sphere upon solvation, these species act as switchable luminophores and single-molecule magnets. The desolvation of the coordinated solvents can be triggered by applying a dynamic vacuum, as well as a temperature gradient stimulus. Raman spectroscopic investigations revealed fast and fully reversible solvation and desolvation processes. Moreover, we also show that a Nd:YAG laser can induce the necessary temperature gradient for a self-sufficient switching process of the Ce(III) analogue in a spatially resolved manner.     

Convenient grafting through approach for the preparation of stealth polymeric blood pool magnetic resonance imaging contrast agents

New hydrosoluble magnetic resonance imaging (MRI) macrocontrast agents are synthesized by reversible addition fragmentation chain transfer (RAFT) copolymerization of poly(ethylene oxide) methyl ether acrylate (PEOMA) with an acrylamide bearing a ligand for gadolinium, followed by the complexation of Gd³⁺. This convenient and simple grafting through approach leads to macrocontrast agents with a high relaxivity at high frequency that is imparted by the restricted tumbling of the Gd³⁺ complex caused by its attachment to the polymer backbone. Importantly a very low protein adsorption is also evidenced by the hemolytic CH50 test. It is the result of the poly(ethylene oxide) (PEO) brush that efficiently hides the gadolinium complex and renders it stealth to the proteins of the immune system. Improved contrast and long blood circulating properties are thus expected for these macrocontrast agents. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New D-π-A-conjugated organic sensitizers based on α-pyranylidene donors for dye-sensitized solar cells

A series of new push-pull organic dyes incorporating a cyanoacrylic acid group as electron acceptor unit and α-chalcogenopyranylidene group (X = S; O) as electron donor unit has been synthesized, characterized and used as sensitizer for dye-sensitized solar cells (DSSCs). For the first time, α-pyranylidene and thiopyranylidene groups, have been evaluated in DSSC. To obtain the thermodynamic values of the solar cell, an investigation of their electrochemical (CV) and optical properties (UV–vis absorption spectroscopy) is also reported.     

Effects of various salts on the determination of arsenic by graphite furnace atomic absorption spectrometry. Direct determination in seawater

The effect of Na, Mg, Ca and Sr as their nitrate, chloride and sulfate salts and seasalt, with and without the use of palladium, on the determination of arsenic by electrothermal atomic absorption spectrometry was investigated. In the absence of any stabilizing agent, arsenic was partially lost as molecular species at low temperatures. The effect of salts on the shape of the atomization signal, the integrated absorbance and the stabilizing effect were highly dependent both on their nature and mass. By trapping arsenic, oxide species resulting from the decomposition of nitrate salts induced a high stabilization effect depending on their vaporization temperatures: MgO～CaO>SrO>Na₂O. The stabilization effect of chlorides occurred about 200?°C lower and depended on mass, volatility and hydrolytic properties: SrCl₂>CaCl₂>MgCl₂～NaCl. The effect of sulfates was mainly dependent on their decomposition/vaporization mechanisms, and in the presence of Na₂SO₄ or CaSO₄ a strong chemical interference effect was observed. Palladium stabilized arsenic in the presence of nitrates, chlorides or even sulfates, leading to a similar delaying effect, signal shape and integrated absorbance. Seasalt induced also important modifications to the atomization signal of As. Moreover, an interference effect was observed, which could probably be attributed to the simultaneous vaporization of sulfate in seasalt. In seawater, Pd suppressed this interference effect and permitted to use a high pyrolysis temperature up to 1400?°C to remove the major part of the seawater matrix before atomization. Under optimized conditions, the detection limit for As obtained in unmodified seawater in the presence of Pd was 0.34 μg L^–1 for a 10 μl sample.