Stability-Indicating TLC-Image Analysis Method for Quantification of Ceftriaxone Sodium in Pharmaceutical Dosage Forms

JPC – Journal of Planar Chromatography – Modern TLC - A simple and rapid thin-layer chromatographic (TLC)-image analysis method has been established for stability-indicating studies and...     

A structural analysis of ultrathin barrier (In)AlN/GaN heterostructures for GaN-based high-frequency power electronics

Metal–organic chemical vapor deposition (MOCVD) is one of the best growth methods for GaN-based materials as well-known. GaN-based materials with very quality are grown the MOCVD, so we used this growth technique to grow InAlN/GaN and AlN/GaN heterostructures in this study. The structural and surface properties of ultrathin barrier AlN/GaN and InAlN/GaN heterostructures are studied by X-ray diffraction (XRD) and atomic force microscopy (AFM) measurements. Screw, edge, and total dislocation densities for the grown samples have been calculated by using XRD results. The lowest dislocation density is found to be 1.69 × 10⁸ cm⁻² for Sample B with a lattice-matched In_0.17Al_0.83N barrier. The crystal quality of the studied samples is determined using (002) symmetric and (102) asymmetric diffractions of the GaN material. In terms of the surface roughness, although reference sample has a lower value as 0.27 nm of root mean square values (RMS), Sample A with 4-nm AlN barrier layer exhibits the highest rough surface as 1.52 nm of RMS. The structural quality of the studied samples is significantly affected by the barrier layer thickness. The obtained structural properties of the samples are very important for potential applications like high-electron mobility transistors (HEMTs).     

Cloud Point Extraction and Flame Atomic Absorption Spectrometric Determination of Cd(II) in Industrial and Environmental Samples

A micelle-mediated separation/preconcentration technique was used for the determination of trace Cd(II) in solid and liquid samples by flame atomic absorption spectrometry. Cadmium ions reacted with ammonium pyrrolidine dithiocarbamate to form a chelate that was extracted from aqueous medium by a non-ionic surfactant Tergitol NP-7 at pH 7. Values of pH, concentrations of ammonium pyrrolidine dithiocarbamate and Tergitol NP-7, temperature, incubation time, sample volume and matrix ions were optimized. The enrichment factor of the method was found to be 25, and the detection and quantitation limits were 1.5 and 3.8 μg/L, respectively. Assessment of the method was performed with a certified reference material, and the observed concentration of Cd(II) was in good agreement with the certified value. The method was also applied to the determination of Cd(II) in waters and industrial samples. Cd(II) concentrations in two industrial ZnO composite samples were determined between 59 and 69 μg/g.     

Cloud point extraction procedure for flame atomic absorption spectrometric determination of lead(II) in sediment and water samples

The conditions for cloud point extraction of lead(II) from aqueous solutions were investigated and optimized. The procedure is based on the separation of Pb(II) – brillant cresyl blue (BCB) complexes into the micellar media by adding the surfactant Triton X-114. After phase separation, the surfactant-rich phase was dissolved with 1 mol L⁻¹ HNO₃ in ethanol and diluted with 1 mol L⁻¹ HNO₃ solution before lead was determined by flame atomic absorption spectrometry. Optimization of the pH, ligand and surfactant quantities, incubation time, temperature, viscosity, sample volume, and interfering ions was performed. The effects of the matrix ions were also examined. The detection limits for three times the standard deviations of the blank for lead were 7.5 μg L⁻¹ for water samples and 0.33 μg g⁻¹ for sediment samples. The validity of cloud point extraction was checked by employing certified reference samples of Lake Sediment IAEA-SL-1 and Sewage Sludge BCR-CRM 144R. The procedure was applied to natural waters and sediment samples with satisfactory results (recoveries >95%, relative standard deviations <6.4%).     

The criteria of strict monotonicity and rotundity points in generalized Calderón–Lozanovskiǐ spaces

In this paper, some basic properties of the general modular space are proven. Criteria for strictly monotone points, extreme points and SU$SU$-points in generalized Calderón–Lozanovskiǐ spaces are obtained. Consequently, the sufficient and necessary conditions for the rotundity properties of such spaces are given.     

Factorial design in the optimization of preconcentration procedure for lead determination by FAAS

The present paper proposes a preconcentration procedure for lead determination using flame atomic absorption spectrometry (FAAS). It is based on lead(II) ions extraction as brilliant cresyl blue (BCB) complex and its sorption onto Diaion HP-2MG, a methacrylic ester copolymer. The optimization step was carried out using factorial design and the variables studied were pH, shaking time and reagent concentration. In the established experimental conditions, lead can be determinate with a limit of detection of 3.7 μg L⁻¹ lead (N = 20) and a relative standard deviation of 7% for a lead concentration of 100 μg L⁻¹. The accuracy was confirmed by analysis of a certified reference material, the stream sediment furnished by National Research Centre for Certified Reference Materials (NRCCRM), China (GBW 07310). Effect of other ions in the procedure proposed was also studied. The method was applied for lead determination in real samples of water, tea, soil and dust. Tests of addition/recovery in the experiments for lead determination in water samples revealed that the proposed procedure could be applied satisfactorily for analysis of these samples.     

The uses of 1-(2-pyridylazo) 2-naphtol (PAN) impregnated Ambersorb 563 resin on the solid phase extraction of traces heavy metal ions and their determinations by atomic absorption spectrometry

1-(2-pyridylazo) 2-naphtol (PAN) impregnated Ambersorb 563 resin was used as solid phase extractor of copper, nickel, cadmium, lead, chromium and cobalt ions in aqueous solutions prior to their atomic absorption spectrometric determinations. The parameters including pH, sample volume, matrix effects were also investigated. The relative standard deviation (R.S.D.) of the combined method of sample treatment, preconcentration and determination with atomic absorption spectrometry is generally lower than 10%. The limit of detection was between 0.21 and 1.4 μg l⁻¹. The results were used for preconcentration of analyte ions from natural water samples. The method was also applied to a stream sediment standard reference material (GBW7309) for the determination of Cu, Ni, Cd, Pb, Cr and Co.     

One‐Pot Bioconversion of l‐Arabinose to l‐Ribulose in an Enzymatic Cascade

This work reports the one‐pot enzymatic cascade that completely converts l ‐arabinose to l ‐ribulose using four reactions catalyzed by pyranose 2‐oxidase (P2O), xylose reductase, formate dehydrogenase, and catalase. As wild‐type P2O is specific for the oxidation of six‐carbon sugars, a pool of P2O variants was generated based on rational design to change the specificity of the enzyme towards the oxidation of l ‐arabinose at the C2‐position. The variant T169G was identified as the best candidate, and this had an approximately 40‐fold higher rate constant for the flavin reduction (sugar oxidation) step, as compared to the wild‐type enzyme. Computational calculations using quantum mechanics/molecular mechanics (QM/MM) molecular dynamics (MD) showed that this improvement is due to a decrease in the steric effects at the axial C4‐OH of l ‐arabinose, which allows a reduction in the distance between the C2‐H and flavin N5, facilitating hydride transfer and enabling flavin reduction.