Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Simulation model for shapiro time delay and light deflection experiments

The time delay experiment proposed by I.I. Shapiro in 1964 and conducted in the seventies was the most precise experiment of general relativity until that time. Further experimentation has improved the accuracy level of both the time delay and the light deflection experiments. A simulation model is proposed that involves only a simple mass and time transformation factor involving velocity of light. The light deflection and the time delay experiments are numerically simulated using this model that does not use the general relativistic equations. The computed values presented in this paper compare well with recent levels of accuracy of their respective experimental results.     

Microwave promoted methylation of plant polysaccharides

O-Methylation is of outstanding importance in structural polysaccharide chemistry. A novel method for the methylation of polysaccharides using microwave (MW) irradiation is described. Seed gum from Cyamopsis tetragonolobus (Guar) was fully methylated with dimethyl sulphate and sodium hydroxide using 100% microwave power for 4 min in 68% yield. The completely methylated seed gum thus obtained was hydrolyzed by 70% formic acid followed by 0.5N H₂SO₄ under full microwave power for 1.16 and 1.66 min, respectively. The partially methylated monosaccharides were separated and identified.     

Ring resonators with N × M couplers

Multiple-zero multiple-pole optical filter transfer functions may be implemented more efficiently in an integrated optics architecture if higher order N × M optical couplers are utilized. For example, a coherent ring resonator made from two 3×3 couplers offers some advantages over the three mirror Fabry-Perot etalon, which is its analog. To this end we develop the formalism for obtaining the transfer functions and scattering matrices of ring resonators made from two N × M couplers. We then present a methodology for analyzing serial and parallel systems of N × M optical coupler ring resonators.     

Surfactant tail length-dependent lipase activity profile in cationic water-in-oil microemulsions

The catalytic activity of Chromobacterium viscosum lipase (CV-lipase) was estimated across varying surfactant tail lengths (C-10-C-18) in water-in-oil (w/o) microemulsions of cationic surfactants containing four different hydroxyethyl-substituted head groups. An attempt to find a correlation, if any, between the activity of interfacially solubilized lipase and the varying surfactant tails was made for the first time in micellar enzymology. The second-order rate constant, k2, in lipase-catalyzed hydrolysis of p-nitrophenyl-n-hexanoate at pH 6.0 and 25 degrees C shows an improvement in enzyme activity (approximately 30-140%) across different head groups of amphiphiles with increasing tail lengths in varying solution compositions. Improvement of enzyme activity is prominent in ascending from C-10 to C-14/C-16, depending on the nature of polar head group. The hydrolytic activity of lipase in different surfactant (50 mM)/water/isooctane/n-hexanol with varying z= [alcohol]/[surfactant] (6.4 or 4.8) was amplified by 25-250% with increment in surfactant tail length in comparison with widely used cationic w/o microemulsions having solution compositions (z=16). As a notable outcome of this research, we found w/o microemulsions of 25 mM tetradecyltrimethylammonium bromide/water/isooctane/n-hexanol (z=8) producing the highest ever activity of lipase in any w/o microemulsions.     

Thermodynamic study of N-trifluoroacetyl-O-alkyl nipecotic acid ester enantiomers on diluted permethylated beta-cyclodextrin stationary phase

Thermodynamic studies were performed on 12 pairs of N-trifluoroacetyl-O-alkyl nipecotic acid ester enantiomers on diluted permethylated beta-cyclodextrin stationary phase (CP Chirasil-Dex CB). The influence of ester alkyl group structure on interaction with permethylated beta-cyclodextrin (Me-CD) and enantioselectivity was studied. The types of alkyl groups studied included n-alkyl (C1-C5) and groups containing branching at differing locations relative to the chiral center of the molecule. The results show that for a given molecular weight, the n-alkyl esters have stronger interactions with Me-CD than esters containing branched alkyl groups. However, although having weaker interactions with Me-CD, esters containing alpha-branched alkyl groups exhibit higher enantioselectivity than the corresponding n-alkyl or beta-branched isobutyl esters. From the retention data, thermodynamic parameters were estimated using the retention increment method and enthalpy-entropy compensation plots (ln R' versus deltaH) were constructed. The results suggest that ester enantiomers with branching at the alpha-carbon of the ester alkyl group have additional and/or different types of enantioselective interactions with Me-CD than the C1-C5 n-alkyl esters or beta-branched isobutyl ester. In order to obtain a qualitative sense of the interaction with Me-CD, structures of the diastereomeric complexes formed between Me-CD and some of the ester enantiomers were modeled using simulated annealing molecular dynamics.     

Amino Acid based cationic surfactants in aqueous solution: physicochemical study and application of supramolecular chirality in ketone reduction

The present study provides a molecular understanding of the origin of the chirality in aqueous micelles and its correlation with the proficiency of stereoselective ketone reduction. The effects of varied headgroup architecture on the surface-active properties as well as on other microstructural parameters were studied and correlated to the structural differences of these naturally occurring amino acid containing surfactants (1-4). Micropolarity sensed by pyrene showed that the micelles prepared using 1-4 are mostly hydrated; particularly large headgroup size surfactant produces more polar environment. A theoretical study was done to quantify the varied spatial dissymmetry for all four surfactants. Asymmetric reduction of prochiral ketones was carried out at the aqueous micellar interface of these chiral amphiphiles by exploiting the supramolecular chirality as evidenced from a circular dichroism study. The enantioselectivity of the reduction process is rationally improved through increase in spatial dissymmetry and steric constraint imposed at the micellar interface by the polar head of surfactants.     

Nickel nitrosyl complexes with the diphenylphosphinoethane ligand

Summary Four-coordinate nickel nitrosyl complexes of the general formula Ni(NO)X(Dppe) (Dppe=Ph₂PCH₂CH₂PPh₂) have been prepared byin situ formation of Ni(NO₂)X(Dppe), (X= Cl, Br, I or SCN) followed by reduction with triphenylphosphine, or carbon monoxide, and/or DMF. Oxygenation of the nitrosyl complexes gives the corresponding nitro products and as indicated by u.v.-vis spectroscopy involves formation of an intermediate. The oxygenation rate increases markedly in the presence of light or of a catalytic amount of benzoyl peroxide and a tentative explanation is offered for these observations. Ionic adducts are formed in reactions between the nitrosyl complexes and donor molecules.Paper presented in part at the XXth ICCC Conference.     

A highly diastereoselective synthesis of (E)-B-2-(1-cyclopropyl-1-alkenyl)-1,3,2-dioxaborinanes. Isolation and oxidation to alkyl cyclopropyl ketones

A convenient, novel synthesis of alkyl cyclopropyl ketones based on Z-1-bromo-1-alkenylboronate esters is developed. α-Bromo-(Z)-1-alkenylboronate esters readily available from literature procedures smoothly undergo a reaction with cyclopropylmagnesium bromide in tetrahydrofuran to provide the corresponding ‘ate’ complexes. These ‘ate’ complexes undergo intramolecular nucleophilic substitution reactions to provide the corresponding (E)-1-alkenylboronate esters containing cylcopropyl moiety for the first time in good isolated yields (68-82%). The carbon skeleton present in these intermediates is confirmed by oxidation with hydrogen peroxide and sodium acetate to afford the corresponding alkyl cyclopropyl ketones in good yields (72-85%).