Entrapment of pH Universal Indicator into Sol‐Gel Matrix

This study involves the behavior of universal indicator entrapped into the sol‐gel matrix. The encapsulation of universal indicator has been prepared by acid catalyzed sol‐gel reaction of tetraethylorthosilicate (TEOS) in the presence of universal indicator to produce transparent monolithic silica doping with universal indicator. The immobilized universal indicator pH‐indicator shows behavior similar to its solution counterpart. The UV/VIS spectra indicate that the universal indicator retains its structure during the sol‐gel reactions in terms of response to pH. The universal indicator can be regarded as uniformly distributed in the sol‐gel matrix. The use of SDS surfactant has positive effects on the immobilized universal indicator monolithic disk due to homogenizing the polymerizing system. This observation has been confirmed using polarized microscopy.     

High precision refractometry based on Fresnel diffraction from phase plates

When a transparent plane-parallel plate is illuminated at a boundary region by a monochromatic parallel beam of light, Fresnel diffraction occurs because of the abrupt change in phase imposed by the finite change in refractive index at the plate boundary. The visibility of the diffraction fringes varies periodically with changes in incident angle. The visibility period depends on the plate thickness and the refractive indices of the plate and the surrounding medium. Plotting the phase change versus incident angle or counting the visibility repetition in an incident-angle interval provides, for a given plate thickness, the refractive index of the plate very accurately. It is shown here that the refractive index of a plate can be determined without knowing the plate thickness. Therefore, the technique can be utilized for measuring plate thickness with high precision. In addition, by installing a plate with known refractive index in a rectangular cell filled with a liquid and following the described procedures, the refractive index of the liquid is obtained. The technique is applied to measure the refractive indices of a glass slide, distilled water, and ethanol. The potential and merits of the technique are also discussed.     

Investigating the effect of flexible constraints on the accuracy of self‐modeling curve resolution methods in the presence of perturbations

Self‐modeling curve resolution methods have continuously been improved during recent years. Many efforts have been made on curve resolution methods to reduce the rotational ambiguity by means of different types of constraints. Choosing proper constraints and cost functions is critically important for the reduction of the rotational ambiguity because the constraints have a direct influence on the accuracy of the area of feasible solution (AFS). In this work, we introduce a new improved cost function, which serves to apply nonnegativity, unimodality, equality, and closure constraints. We also investigate the reduction of the AFS under hard and soft constraints. Another point of this work is to evaluate the accuracy and precision of the reduced AFS in the presence of noise and perturbations, under hard and soft implementation of nonnegativity, unimodality, equality, and closure constraints. A comparison is given between the reduced AFS with soft constraints (small deviations from constraints are accepted) and the reduced AFS under hard constraints (restrictedly forced constraints). A graphical visualization of this comparison is presented for various model problems. The results show that an AFS computation with soft constraints provides more reliable results, especially in the presence of noise. The test problems substantiate significant advantages of soft constraints over hard constraints because the obtained profiles are closer to the potentially true noisy profiles, which contain small deviations from ideal responses. Using tunable parameters ϵ,γ,ω,δ is one of the advantages of soft constrained cost function that allows the small deviations from ideal responses. Ultimately, soft constraints can help to reduce the lack‐of‐fit, and they are a proper instrument to handle the effect of noise on the AFS. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermo-electric-induced dichroism in ion-exchanged glasses: a candidate mechanism for the alignment of silver nanoparticles

In the present work, the alignment mechanism of silver nanoparticles on the surface of a heated ion-exchanged glass, in presence of an external uniform DC electric field ([(E)\vec]₀)(\vec{E}_{0}) parallel to the surface of the sample, is studied. At high temperature, the ionic silver clusters reduce to neutral ones and move toward the surface. Simultaneously, due to the external electric field the clusters interact with other ones as induced electrical dipoles. This leads to alignment of nanoparticles along [(E)\vec]₀\vec{E}_{0} and formation of a chain-like conductive structure, which makes the sample dichroic. Taking into account the matrix surface viscosity and using the method of image dipoles to model the influence of the substrate on the dipole interactions, we give an interpretation about the relative equilibrium positions of generated nanoclusters and consequently the formation mechanism of the chain-like structure on the surface of the ion-exchanged glass.     

Chemometrics assisted dispersive liquid–liquid microextraction for quantification of seven UV filters in urine samples by HPLC‐DAD

In the present study, dispersive liquid–liquid microextraction followed by high performance liquid chromatography‐diode array detection has been developed as simple, rapid, accurate, and efficient sample preparation method for simultaneous determination of seven organic UV filters in urine samples. The influence of the main effects as well as their interactions was studied through a 2^(6–2) fractional factorial design. The candidate parameters were: type and volume of dispersant and extraction solvents, sample pH, and salt concentration. Under final optimal conditions, the analytes were extracted from 5 mL of samples by addition of 0.5 mL of acetonitrile (dispersing solvent) containing 70 μL of carbon tetrachloride (extraction solvent), without modifying the pH of the solution and applying the (+1) level of salt concentration (10% w/v NaCl). The assay was linear (R² > 0.997), relative recoveries ranged from 86.9 up to 97.3% and the LOQs between 3 and 45 ng mL^?1 were obtained. The intra‐ and interday RSDs were lower than 5 and 8% at the middle point of the linear range, respectively. The proposed method was successfully applied to different volunteer urine samples and it was shown that the extraction efficiency was not affected by the type of urine samples.     

Nonlinear optical characterization of phosphate glasses based on ZnO using the Z-scan technique

The nonlinear optical properties of a phosphate vitreous system [(ZnO)_x-(MgO)_30-x-(P₂ O₅)₇₀], where x=8, 10, 15, 18, and 20 mol% synthesized through the melt-quenching technique have been investigated by using the Z-scan technique. In the experiment, a continuous-wave laser with a wavelength of 405 nm was utilized to determine the sign and value of the nonlinear refractive (NLR) index and the absorption coefficient with closed and opened apertures of the Z-scan setup. The NLR index was found to increase with the ZnO concentration in the glass samples by an order of 10^-10 cm²·W^-1. The real and imaginary parts of the third-order nonlinear susceptibility were calculated by referring to the NLR index (n₂) and absorption coefficient (β) of the samples. The value of the third-order nonlinear susceptibility was presented by nonlinear refractive or absorptive behavior of phosphate glasses for proper utilization in nonlinear optical devices. Based on the measurement, the positive sign of the NLR index shows a self-focusing phenomenon. The figures of merit for each sample were calculated to judge the potential of phosphate glasses for application in optical switching.     

Linear dichroism, produced by thermo-electric alignment of silver nanoparticles on the surface of ion-exchanged glass

A heated Ag⁺-doped glass is subjected to an external constant uniform electric field (E_o > 250 V/cm) parallel to its surface. Absorption spectra studies by linear polarized light imply the induction of a linear dichroism in the samples, after the above-mentioned thermo-electrical process. It is found that the increase in the temperature (400 °C ≤ T ≤ 600 °C), results in the formation of neutral silver multimers and clusters on the samples. Dichroism is the result of simultaneous application of the steady uniform electric field and heating. That is, the process aligns the produced silver nanoparticles along the applied electric field (E_o) during the aggregation of silver nano-clusters via dipole-dipole interaction, leading to the formation of chain-like conductive structures.     

Fast liquid chromatography-diode array detection assisted by chemometrics for quantification of seven ultraviolet filters in effluent wastewater

A fast chromatographic method is presented for simultaneous quantification of seven organic ultraviolet (UV) filters (benzophenone-3,4-methylbenzilidene camphor, octocrylene, 1-(4-tert-butylphenyl)-3-(4-methyoxyphenyl)1,3-propanedione), ethylhexyl methoxy cinnamate, ethylhexyl salicylate and homosalate) in effluent wastewater samples. The UV filters were pre-concentrated by Bond Elut-ENV cartridges and separated on an ODS column (15 cm × 0.46 cm, 5 μm) in less than 2.5 min using a non-aqueous mobile phase of methanol-acetonitrile (50:50, v/v) with flow-rate of 1.5 mL min⁻¹. Appropriate baseline correction through asymmetric least squares was applied to reduce the matrix of background signals in three way data. Then, second-order calibration based on multivariate curve resolution-alternating least squares (MCR-ALS) was implemented on the unfolded three-way data obtained from liquid chromatography with diode array detection (LC-DAD) through standard addition calibration method for handling co-eluted peaks, systematic and proportional errors. Recoveries ranging from 76% to 130% and %RSD values less than 11.2 for all UV filter shows the accuracy and precision of the proposed method in wastewater samples. In addition, statistical t-test as well as computed elliptical joint confidence region (EJCR) confirms the accuracy of the proposed method and indicates the absence of both constant and proportional errors in the predicted concentrations. This study demonstrates that coupling of the fast HPLC-DAD method with powerful algorithm of MCR-ALS can be considered as an efficient method for quantification of UV filters in highly contaminated samples of wastewaters where both time and cost per each analysis can be reduced significantly.     

Optimal design of 32 channels spectrum slicing WDM for optical fiber access network system

In this article, the spectrum sliced dense wavelength division multiplexed passive optical network (SS-DWDM–PON) has been investigated as a power efficient and cost effective solution for optical access networks. In this work an AWG demultiplexer is used to operate as slicing system. The high speed SS-DWDM system has been realized and investigated for 32 channels with data rate up to 3 Gb/s using broadband ASE source (LED). The 3 Gb/s signals both non-return-to-zero (NRZ) and return-to-zero (RZ) were demonstrated in 40 km optical fiber link with BER < 10⁻¹². The results obtained here demonstrate that SS-DWDM is well suited for Fiber-to-the-Home (FTTH) network.     

Recording of the polarization of light specified by anisotropic crystals with the aid of photoinduced dichroism in photosensitive films

It is shown that photoinduced dichroism in photosensitive AgCl films with Ag granules can be used to record the spectral dependence of the state of polarization specified by anisotropic crystals. The recording of the state of polarization throughout the visible spectral region is favored by the frequency photoadaptation, which is typical of AgCl–Ag films. This effect also determines the good reproduction of color corresponding to the spectrum of the irradiating beam. The results show the feasibility of determining the magnitude of photoinduced dichroism and its dispersion by analyzing the pattern recorded in a film in polarized light.