Studies on thermal and morphological properties of 1,1-bis(3-methyl-4-cyanatophenyl)cyclohexane-epoxy-bismaleimide matrices

A new cyanate ester monomer, 1,1-bis(3-methyl-4-cyanatophenyl)cyclohexane has been synthesized and characterized. Epoxy modified with 4, 8 and 12% (by weight) of cyanate ester were made using epoxy resin and 1,1-bis(3-methyl-4-cyanatophenyl)cyclohexane and cured by using diaminodiphenylmethane. The cyanate ester modified epoxy matrix systems were further modified with 4, 8 and 12% (by weight) of bismaleimide (N,N′-bismaleimido-4,4′-diphenylmethane). The formation of oxazolidinone and isocyanurate during cure reaction of epoxy and cyanate ester blend was confirmed by IR spectral studies. Bismaleimide-cyanate ester-epoxy matrices were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and heat deflection temperature (HDT) analysis. Thermal studies indicate that the introduction of cyanate ester into epoxy resin improves the thermal degradation studies at the expense of glass transition temperature. Whereas the incorporation of bismaleimide into epoxy resin enhances the thermal properties according to its percentage content. However, the introduction of both cyanate ester and bismaleimide influences the thermal properties according to their percentage content. DSC thermogram of cyanate ester modified epoxy and bismaleimide modified epoxy show unimodel reaction exotherms. The thermal degradation temperature and heat distortion temperature of the cured bismaleimide modified epoxy and cyanate ester-epoxy systems increased with increasing bismaleimide content. The morphology of the bismaleimide modified epoxy and cyanate ester-epoxy systems were also studied by scanning electron microscopy. Copyright © 2003 John Wiley & Sons, Ltd.     

The unitary representation operators

A representation (called theU-representation) which remains unitary for all spins and for all ranges of velocities was obtained by us in a recent paper. We obtain here relevant expressions for the boosts operator and the observables in such a representation.     

Development and characterization of fully bio‐based polybenzoxazine‐silica hybrid composites for low‐k and flame‐retardant applications

In the present work, new classes of bio‐based polybenzoxazines were synthesized using eugenol as phenol source and furfurylamine and stearylamine as amine sources separately through solventless green synthetic process routes and were further reinforced with varying percentages (1, 3, 5, and 10 wt%) of silica (from rice husk) to attain hybrid composites. The molecular structure, cure behaviour, thermal stability, dielectric properties, and flame‐retardant behaviour of both benzoxazine monomers and benzoxazine composites were characterized using appropriate modern analytical techniques. The eugenol‐based benzoxazines synthesized using furfurylamine (FBz) and stearylamine (SBz) were cured at 223°C and 233°C, respectively. The differential scanning calorimetry (DSC) data reveal the glass transition temperatures (T_g) of FBz and SBz were 157°C and 132°C, respectively, and the maximum decomposition temperature (T_max) as obtained from thermogravimetric analysis (TGA), were found to be 464°C and 398°C for FBz and SBz, respectively. The dielectric constants for FBz and SBz obtained at 1 MHz were 3.28 and 3.62, respectively. Furthermore, varying weight percentages (1, 3, 5, and 10 wt%) of 3‐mercaptopropyltrimethoxysilane (3‐MPTMS) functionalized bio‐silica reinforced the composite materials as evidenced by their improved thermal stability and lower dielectric constant. Data obtained from thermal and dielectric studies suggested that these polybenzoxazines could be used in the form of adhesives, sealants, and composites for high performance inter‐layer low‐k dielectric applications in microelectronics.     

Cyclotriphosphazene Fibre Reinforced Poly(benzoxazine-co-ε-caprolactam) Nanocomposites for Flame Retardant Applications

Cyclophosphazene nanotube(PZT) incorporated poly(benzoxazine-co-ε-caprolactam)(P(BZ-co-CPL)) nanocomposites were developed for improving flame retardant properties. The effects of PZT on the flammability properties of P(BZ-co-CPL) matrix were evaluated through UL-94 flammability test and limiting oxygen index(LOI). The UL-94 results of P(BZ-co-CPL)/PZT hybrid nanocomposites showed V-1 rating, whereas neat P(BZ-co-CPL) showed burning rating. The LOI values are increased from 25.4 to 31.4 for 1.5 wt% PZT incorporated P(BZ-co-CPL) nanocomposite systems. SEM was used to study the char morphology of P(BZ-co-CPL)/PZT after being exposed to UL-94 flammability test. Data from thermal studies indicate that the PZT incorporated P(BZ-co-CPL) systems possess better Tg and thermal degradation behavior when compared to the neat P(BZ-co-CPL). The values of dielectric constant are decreased with increasing temperature. From the values, it is ascertained that the P(BZ-co-CPL)/PZT systems exhibit stable dielectric behavior with regard to variation in temperature. The TEM images ascertain the uniform dispersion of PZT in the P(BZ-co-CPL) matrix.     

La<Subscript>0.1</Subscript>Ca<Subscript>0.9</Subscript>MnO<Subscript>3</Subscript>/Co<Subscript>3</Subscript>O<Subscript>4</Subscript> for oxygen reduction and evolution reactions (ORER) in alkaline electrolyte

Non-precious metal bifunctional catalysts are of great interest for metal–air batteries, electrolysis, and regenerative fuel cell systems due to their performance and cost benefits compared to the Pt group metals (PGM). In this work, metal oxides of La_0.1Ca_0.9MnO₃ and nano Co₃O₄₇ catalyst as bifunctional catalysts were used in oxygen reduction and evolution reactions (ORER). The catalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ adsorption isotherms. The electrocatalytic activity of the perovskite-type La_0.1Ca_0.9MnO₃ and Co₃O₄ catalysts both as single and mixtures of both were assessed in alkaline solutions at room temperature. Electrocatalyst activity, stability, and electrode kinetics were studied using cyclic voltammetry (CV) and rotating disk electrode (RDE). This study shows that the bifunctional performance of the mixed La_0.1Ca_0.9MnO₃ and nano Co₃O₄ was superior in comparison to either La_0.1Ca_0.9MnO₃ or nano Co₃O₄ alone for ORER_. The improved activity is due to the synergistic effect between the La_0.1Ca_0.9MnO₃ and nano Co₃O₄ structural and surface properties. This work illustrates that hybridization between these two metal oxides results in the excellent bifunctional oxygen redox activity, stability, and cyclability, leading to a cost-effective application in energy conversion and storage, albeit to the cost of higher catalyst loadings.     

SYNTHESIS, CHARACTERIZATION AND PROPERTIES OF ORGANOCLAY-MODIFIED POLYSULFONE/EPOXY INTERPENETRATING POLYMER NETWORK NANOCOMPOSITES

Organoclay-modified hydroxylterminated polysulfone (PSF)/epoxy interpenetrating network nanocomposites (oM-PSF/EP nanocomposites) were prepared by adding organophilic montmorillonite (oMMT) to interpenetrating polymer networks (IPNs) of polysulfone and epoxy resin (PSF/EP) using diaminodiphenylmethane (DDM) as curing agent.The mechanical properties like tensile strength,tensile modulus,flexural strength,flexural modulus and impact properties of the nanocomposites were studied as per ASTM standards.Differ...     

Synthesis of N-confused tetraphenylporphyrin rhodium complexes having versatile metal oxidation states

A variety of N-confused tetraphenylporphyrin rhodium complexes were synthesized, and their structures and physical properties were investigated. Depending on the reaction conditions, the rhodium(I), -(III), and -(IV) complexes were produced, which exemplified the versatile coordination mode of N-confused porphyrin ligands.     

Cyanate ester tethered POSS/BACY nanocomposites for low‐k dielectrics

Low‐k dielectrics have been developed as an interlayer insulating material in the large scale integrated circuitry devices by the copolymerization of various weight percentages (10, 20, 30, and 40 wt%) of cyanate ester tethered POSS (POSS‐OCN) and bisphenol‐A cyanate ester (BACY) to obtain BACY/POSS‐OCN nanocomposites. The reinforcement of POSS‐OCN significantly contributes to the reduction in the value of dielectric constant and dielectric loss as well, which might be due to the presence of porous structured POSS‐OCN. The 30 wt% POSS‐OCN/BACY nanocomposite possesses the lowest value of dielectric constant of 1.81 at 1 MHz. Copyright © 2016 John Wiley & Sons, Ltd.     

Fabrication of Bioactive Polyoxymethylene Nanocomposites for Bone Tissue Replacement

Summary: Stearic acid modified nano hydroxyapatite (n-SHA) filled polyoxymethylene (POM) nanocomposites were prepared by melt mixing method for bone tissue replacement and regeneration applications. Contact angle measurements of POM nanocomposites were carried out to understand the effect of n-SHA addition on the hydrophobicity of nanocomposites. The mechanical properties like tensile strength, Young's modulus and elongation at break were found to be increased significantly by the incorporation of n-SHA into the POM matrix. The bone-bonding ability of the nanocomposites was evaluated by examining the apatite formation on their surface after soaking in simulated body fluid (SBF) and apatite formation was studied by atomic force microscopy (AFM). The protein adhesion studies revealed the enhanced biocompatibility of the nanocomposites due to the presence of n-SHA nanofillers on the surface and it provides favorable binding sites for protein adsorption. The significant improvement in the biocompatibility as well as mechanical, thermal and hydrophobic properties of the POM nanocomposites makes it a potential future material for bone implantation.     

Studies on grafting of tris(2‐methoxyethoxy)vinylsilane onto ethylene‐propylene‐diene terpolymer

New graft copolymer was prepared by incorporating tris(2‐methoxyethoxy)vinylsilane (TMEVS) on ethylene‐propylene‐diene terpolymer (EPDM) by using dicumyl peroxide (DCP) as initiator, in Haake Rheocord 90 torque rheometer. The effect of EPDM concentration, TMEVS concentration, reaction time, reaction temperature and initiator concentration on the graft co polymerization was studied. The grafting efficiency of TMEVS on EPDM was confirmed by Fourier Transform infrared (FT‐IR) spectroscopy. The grafting efficiency increased with increase in the silane concentration upto 6% by weight. The grafting efficiency decreased beyond 6% by weight due to homopolymerization of TMEVS and non‐availability of carbon–carbon double bond in the EPDM terpolymer. The thermal properties of peroxide cured EPDM and hot water cured EPDM‐g‐TMEVS were studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis. The results show thermal properties like degradation tempertature and glass transition temperature of the EPDM‐g‐TMEVS were increased due to introduction of TMEVS on to EPDM terpolymer as well as the formation of thermally stable three‐dimensional network. Copyright © 2004 John Wiley & Sons, Ltd.