Synthetic directions towards capsular polysaccharide of Streptococcus pneumoniae serotype 18C

An efficient synthetic strategy has been developed for the synthesis of the tri, tetrasaccharide block and pentasaccharide corresponding to the capsular polysaccharide of Streptococcus pneumonia serotype 18C as their 2-aminoethyl glycosides. A one-pot glycosylation-deprotection, sequential glycosylations strategy has been adopted for the construction of the fragments and pentasaccharide derivative, which were then transformed into target compound after a series of functional group transformations. The synthetic method relies on the use of p-methoxybenzyl ether as an in situ-removable protecting group to reduce the number of reaction steps significantly. Here H₂SO₄-silica has been used successfully as a promoter for all glycosylation reaction. In addition, the synthetic target also contained a free amino group at its reducing end, facilitating its conjugation with other molecules for various biological studies and applications.     

Solvent- and Substrate-Induced Chiroptical Inversion in Amphiphilic,Biocompatible Glycoconjugate Supramolecules: Shape-Persistent Gelation,Self-Healing,and Antibacterial Activity

We have shown solvent- and substrate-dependent chiral inversion of a few glycoconjugate supramolecules. (Z)-F-Gluco, in which d -glucosamine has been attached chemically to Cbz-protected l -phenylalanine at the C terminus, forms a self-healing hydrogel through intertwining of the nanofibers wherein the gelators undergo lamellar packing in the β-sheet secondary structures with a single chiral handedness. Dihybrid (Z)-F-gluco nanocomposite gel was prepared by in-situ formation of silver nanoparticles AgNPs in the gel; this enhances the mechanical properties of the composite gel through physical crosslinking without altering the packing pattern. In contrast, (Z)-L-gluco bearing an l -leucine moiety does not form a hydrogel but an organogel. Interestingly, the chiral handedness of the aggregates of (Z)-L-gluco can be reversed by choosing suitable solvents. In addition to self-healing behavior, (Z)-L-gluco gel revealed shape persistency. Further, (Z)-F-gluco hydrogel is benign, nontoxic, non-immunogenic, and non-allergenic in animal cells. AgNP-loaded (Z)-F-gluco hydrogel showed antibacterial activity against both Gram-positive and Gram-negative bacteria.     

Transition-Metal-Free Heterocyclic Carbon-Boron Bond Formation

Heteroaryl boronic acids and esters are extremely important and valuable intermediates because of their wide application in the synthesis of marketed drugs and bioactive compounds. Over the last couple of decades, the construction of highly important heteroaryl carbon-boron bonds has created huge attention. The transition-metal-free protocols are more green, less sensitive to air and moisture, and also economically advantageous over the transition-metal-based protocols. The transition-metal-free C−H borylation of heteroarenes and C−X (X=halogen) borylation of heteroaryl halides represents an excellent approach for their synthesis. Also, various cyclization and alkyne activation protocols have been recently established for their synthesis. The goal of this review article is to summarize the existing literature and the current state of the art for transition-metal-free synthesis of heteroaryl boronic acid and esters.     

Pair correlation function and freezing transitions in a two-dimensional system of model ultrasoft colloids

Density functional theory (DFT) of freezing has been used to investigate the freezing transitions in a system of colloidal particles confined to a two-dimensional plane. The particles interact via a model Hertzian type potential of varying softness. The pair-correlation functions (PCFs) needed as input structural information in DFT are calculated by solving hypernetted chain (HNC) integral equation theory. The PCFs thus obtained have been compared with those obtained through experiment and simulations and are found to be in good qualitative agreement. We found that the PCFs are sensitive to the softness of the potential: showing splitting of pair-correlation peak in the harder case and anomalous non-monotonic density dependence in the softer case. Using the common tangent construction method, we have also proposed the fluid-triangular solid phase diagrams in the temperature-density plane. We found that the phase diagram exhibit solid-fluid coexistence region whose thickness decreases with the increasing temperature as well as with increasing softness of the potential. In the temperature and density range of our calculation, DFT fails to produce any reentrance in the phase diagram.     

Synthesis and Characterization of New Phosphorus Containing Sulfonated Polytriazoles for Proton Exchange Membrane Application

Sulfonated polytriazoles have drawn a great attention as high performance polymers and their good film forming ability. In the present study, a phosphorus containing new diazide monomer namely, bis-[4-(4′-aminophenoxy)phenyl]phenylphosphine was synthesized and accordingly, a series of phosphorus containing sulfonated polytriazoles (PTPBSH-XX) was synthesized by reacting equimolar amount of this diazide monomer (PAZ) in combination with another sulfonated diazide monomer (DSAZ) and a terminal bis-alkyne (BPALK) by the Cu (I) catalyzed azide–alkyne click polymerization. The polymers were characterized by nuclear magnetic resonance (¹H, ¹³C, ³¹P NMR) and Fourier transform infrared spectroscopic techniques. The sulfonic acid content of the copolymers also determined from the different integral values obtained from the ¹H NMR signals. The small-angle X-ray scattering results unfolded the well-separated dispersion of the hydrophilic and hydrophobic domains of the polymers. As a whole, the copolymer membranes displayed sufficient thermal, mechanical, and oxidative stabilities high with high proton conductivity and low water uptake that are essential for proton exchange membrane applications. The copolymers exhibited oxidative stability in the range of 15–24 h and had proton conductivity values were found as high as 38–110 mS cm⁻¹ at 80 °C in completely hydrated condition. Among the all copolytriazoles, PTPBSH-90 (BPALK:DSAZ:PAZ = 100:90:10) having IEC_W = 2.44 mequiv g⁻¹, showed proton conductivity as high as 119 mS cm⁻¹ at 90 °C with an activation energy of 10.40 kJ mol⁻¹ for the proton conduction. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 263–279     

Multi-C−C/C−N-Coupled Light-Emitting Aliphatic Terpolymers: N−H-Functionalized Fluorophore Monomers and High-Performance Applications

To circumvent costly fluorescent labeling, five nonconventional, multifunctional, intrinsically fluorescent aliphatic terpolymers ( 1 – 5 ) have been synthesized by C−C/C−N-coupled, solution polymerization of two non-emissive monomers with protrusions of fluorophore monomers generated in situ. These scalable terpolymers were suitable for sensing and high-performance exclusion of Cu^II, logic function, and bioimaging. The structures of the terpolymers, in situ attachment of fluorescent monomers, aggregation-induced enhanced emission, bioimaging ability, and super adsorption were investigated by ¹H and ¹³C NMR, EPR, FTIR, X-ray photoelectron, UV/Vis, and atomic absorption spectroscopy, thermogravimetric analysis, high-resolution transmission electron microscopy, dynamic light scattering, solid-state fluorescence, fluorescence imaging, and fluorescence lifetime measurements, as well as by isotherm, kinetics, and thermodynamic studies. The geometries and electronic structures of the fluorophores and the absorption and emission properties of the terpolymers were examined by DFT, time-dependent DFT, and natural transition orbital analyses. For 1 , 2 , and 5 , the limits of detection were determined to be 1.03×10⁻⁷, 1.65×10⁻⁷, and 1.77×10⁻⁷ m , respectively, and the maximum adsorption capacities are 1575.21, 1433.70, and 1472.21 mg g⁻¹, respectively.     

Boron-Containing Lipids and Liposomes: New Conjugates of Cholesterol with Polyhedral Boron Hydrides

A series of boron-containing lipids were prepared by reactions of cyclic oxonium derivatives of polyhedron boranes and metallacarboranes (closo-dodecaborate anion, cobalt and iron bis(dicarbollides)) with amine and carboxylic acids which are derived from cholesterol. Stable liposomal formulations, on the basis of synthesized boron-containing lipids, hydrogenated soybean l -α-phosphatidylcholine and (HSPC) 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DSPE-PEG) as excipients, were prepared and then characterized by dynamic light scattering (DLS) that revealed the formation of particles to be smaller than 200 nm in diameter. The resulting liposomal formulations showed moderate to excellent loading and entrapment efficiency, thus justifying the design of the compounds to fit in the lipid bilayer and ensuring ease of in vivo use for future application. The liposomal formulations based on cobalt and iron bis(dicarbollide)-based lipids were found to be nontoxic against both human breast normal epithelial cells MCF-10A and human breast cancer cells MCF-7.     

Electrocatalytic Reduction of Nitrogen to Ammonia Using Tiara-like Phenylethanethiolated Nickel Cluster

The fixing of N₂ to NH₃ is challenging due to the inertness of the N≡N bond. Commercially, ammonia production depends on the energy-consuming Haber-Bosch (H−B) process, which emits CO₂ while using fossil fuels as the sources of hydrogen and energy. An alternative method for NH₃ production is the electrochemical nitrogen reduction reaction (NRR) process as it is powered by renewable energy sources. Here, we report a tiara-like nickel-thiolate cluster, [Ni₆(PET)₁₂] (where, PET=2-phenylethanethiol)] as an efficient electro-catalyst for the electrochemical NRR at ambient conditions. Ammonia (NH₃: 16.2±0.8 μg h⁻¹ cm⁻²) was the only nitrogenous product over the potential of −2.3 V vs. F_c⁺/F_c with a Faradaic efficiency of 25%±1.7. Based on theoretical calculations, NRR by [Ni₆(PET)₁₂] proceeds through both the distal and alternating pathways with an onset potential of −1.84 V vs. RHE (i.e., −2.46 V vs. F_c⁺/F_c) which corroborates with the experimental findings.     

Zwitterionic structures of selenocysteine-containing dipeptides and their interactions with Cu(II) ions

The molecular structures of a series of selenocysteine-containing dipeptides in their zwitterionic forms were studied using the B3LYP/6-311++G(d,p) level in the aqueous phase. The B3LYP and BH and HLYP functionals in combination with 6-311++G(d,p) and LANL2DZ basis sets were used to investigate the effects of metal coordination on the structural and molecular properties of the dipeptides by complexing them with bivalent copper ions. The results from this DFT study provide valuable insights into the interaction enthalpies (metal ion-binding affinities) and free energies, the influence of the C-terminal moiety on the backbone structural features, the existence of various types of intramolecular H-bond interactions, harmonic vibrational frequencies, along with various other electronic properties pertaining to the zwitterions of the dipeptide molecules as well as their metallic complexes. Metal coordination via the carboxylate groups tends to enhance the planarity of the amide planes. The participations of the N- and C-terminal side-chain moieties in metal-binding markedly enhance the thermodynamic stability of the metalated dipeptides. The theoretical λ_maxvalues, calculated using the TD/DFT level for all the systems, well represent the occurrence of d-d transitions in the Cu-dipeptide complexes.     

Stability-indicating RP-HPLC method for simultaneous quantitation of tramadol and aceclofenac in presence of their major degradation products: Method development and validation

Primary objective of this study was to develop a stability-indicating reverse-phase high-performance liquid chromatography (HPLC) method for simultaneous quantitation of tramadol and aceclofenac in presence of their degradation products. The drugs were subjected to various International Conference on Harmonization recommended stress conditions, such as acid hydrolysis, alkaline hydrolysis, peroxide oxidation, thermolysis, and photolysis. The major degradation products got well resoluted from the analytes in HPLC analysis with a mobile phase composed of a mixture of 0.01?M ammonium acetate buffer (pH 6.5) and acetonitrile (65:35, v/v) through a Phenomenex Gemini C18 (250?mm?×?4.6?mm, 5?µm particle size) column. The method was linear over a range of 15–60?µg/mL for tramadol and 40–160?µg/mL for aceclofenac concentration. The analytes were detected at a wavelength of 270?nm. The method was validated and found to be specific, accurate, precise, stable, and robust for its intended use. The method can be recommended for its future use in routine quality control, accelerated and real-time stability analysis of the formulations containing tramadol and aceclofenac combination.