Evolution of femtosecond laser-induced damage in doped GaN thin films

Mg- and Si-doped GaN layers deposited by metalorganic chemical vapor deposition method were irradiated with femtosecond pulse duration laser of three different wavelengths 1,030, 515 and 343 nm. Both single and multiple shot laser induced damage thresholds of doped GaN layers were evaluated and discussed. The scanning electron microscopy employed with electron beam induced current and energy dispersive X-ray techniques were used to study laser damage morphology. It was observed that ablated area and laser-induced damage increased with irradiation fluence. The mechanism of damage generation by Gaussian beam profile laser was considered.     

Dispersion production by semi-continuous radical vinyl acetate emulsion polymerization with silane co-monomer and characterization of final products

Vinyl acetate radical emulsion polymerization in water with GF51 silane co-monomer was performed by semi continuous way. The GF51 impacts on dispersion rheology as well on films and bonding strength properties were determined. It should be stated that even low quantities of GF51 (up to 6% from VAc) determined high viscosity of dispersions. The GF51 modified films have low water absorption and high affinity to glass. Molecular mass and thermal properties of GF51 modified polymers were determined accordingly.     

Mode transitions in distributed-feedback tapered master-oscillator power-amplifier: theory and experiments

Theoretical and experimental investigations have been carried out to study the spectral and spatial behavior of monolithically integrated distributed-feedback tapered master-oscillators power-amplifiers emitting around 973 nm. Introduction of self and cross heating effects and the analysis of longitudinal optical modes allows us to explain experimental results. The results show a good qualitative agreement between measured and calculated characteristics.     

Versatile C(sp2)−C(sp3) Ligand Couplings of Sulfoxides for the Enantioselective Synthesis of Diarylalkanes

The reaction of chiral (hetero)aryl benzyl sulfoxides with Grignard reagents affords enantiomerically pure diarylalkanes in up to 98 % yield and greater than 99.5 % enantiomeric excess. This ligand coupling reaction is tolerant to multiple substitution patterns and provides access to diverse areas of chemical space in three operationally simple steps from commercially available reagents. This strategy provides orthogonal access to electron‐deficient heteroaromatic compounds, which are traditionally synthesized by transition metal catalyzed cross‐couplings, and circumvents common issues associated with proto‐demetalation and β‐hydride elimination.     

40 GHz Mode-Locked Semiconductor Lasers: Theory, Simulations and Experiment

We study both theoretically and experimentally typical operation regimes of 40 GHz monolithic mode-locked lasers. The underlying Traveling Wave Equation model reveals quantitative agreement for characteristics of the fundamental mode-locking as pulse width and repetition frequency tuning, as well as qualitative agreement with the experiments for other dynamic regimes. Especially the appearance of stable harmonic mode-locking at 80 GHz has been predicted theoretically and confirmed by measurements. Furthermore, we derive and apply a simplified Delay-Differential-Equation model which guides us to a qualitative analysis of bifurcations responsible for the appearance and the breakup of different mode-locking regimes. Higher harmonics of mode-locking are predicted by this model as well.     

Transition‐Metal‐Free Cross‐Coupling of Benzothiophenes and Styrenes in a Stereoselective Synthesis of Substituted (E,Z)‐1,3‐Dienes

A transition metal‐free one‐pot stereoselective approach to substituted (E,Z)‐1,3‐dienes was developed by using an interrupted Pummerer reaction/ligand‐coupling strategy. Readily available benzothiophene S‐oxides, which can be conveniently prepared by oxidation of the parent benzothiophenes, undergo Pummerer coupling with styrenes. Reaction of the resultant sulfonium salts with alkyllithium/magnesium reagents generates underexploited hypervalent sulfurane intermediates that undergo selective ligand coupling, resulting in dismantling of the benzothiophene motif and the formation of decorated (E,Z)‐1,3‐dienes.     

Determination of Organic Compounds,Fulvic Acid,Humic Acid,and Humin in Peat and Sapropel Alkaline Extracts

Black, brown, and light peat and sapropel were analyzed as natural sources of organic and humic substances. These specific substances are applicable in industry, agriculture, the environment, and biomedicine with well-known and novel approaches. Analysis of the organic compounds fulvic acid, humic acid, and humin in different peat and sapropel extracts from Lithuania was performed in this study. The dominant organic compound was bis(tert-butyldimethylsilyl) carbonate, which varied from 6.90% to 25.68% in peat extracts. The highest mass fraction of malonic acid amide was in the sapropel extract; it varied from 12.44% to 26.84%. Significant amounts of acetohydroxamic, lactic, and glycolic acid derivatives were identified in peat and sapropel extracts. Comparing the two extraction methods, it was concluded that active maceration was more efficient than ultrasound extraction in yielding higher amounts of organic compounds. The highest amounts of fulvic acid (1%) and humic acid and humin (15.3%) were determined in pure brown peat samples. This research on humic substances is useful to characterize the peat of different origins, to develop possible aspects of standardization, and to describe potential of the chemical constituents.     

Variation of Triterpenes in Apples Stored in a Controlled Atmosphere

Apples are seasonal fruits, and thus after harvesting apples of optimal picking maturity, it is important to prepare them properly for storage and to ensure proper storage conditions in order to minimize changes in the chemical composition and commercial quality of the apples. We studied the quantitative composition of triterpenic compounds in the whole apple, apple peel and apple flesh samples before placing them in the controlled atmosphere (CA) chambers, and at the end of the experiment, 8 months later. HPLC analysis showed that highest total amount of triterpenic compounds (1.99 ± 0.01 mg g⁻¹) was found in the whole apple samples of the ‘Spartan’ cultivar stored under variant VIII (O₂—20%, CO₂—3%, N₂—77%) conditions. Meanwhile, the highest amount of triterpenic compounds (11.66 ± 0.72 mg g⁻¹) was determined in the apple peel samples of the ‘Auksis’ cultivar stored under variant II (O₂—5%, CO₂—1%, N₂—94%) conditions. In the apple peel samples of the ‘Auksis’ cultivar stored under variant I (O₂—21%, CO₂—0.03%, N₂—78.97%) conditions, the amount of individual triterpenic compounds (ursolic, oleanolic, corosolic, and betulinic acids) significantly decreased compared with amount determined before the storage. Therefore, in the apple flesh samples determined triterpenic compounds are less stable during the storage under controlled atmosphere conditions compared with triterpenic compounds determined in the whole apple and apple peel samples.