Synthesis of New Lithium Ionic Conductor Thio-LISICON—Lithium Silicon Sulfides System

The new lithium ionic conductors, thio-LISICON (LIthium SuperIonic CONductor), were found in the ternary Li₂S-SiS₂-Al₂S₃ and Li₂S-SiS₂-P₂S₅ systems. Their structures of new materials, Li_4+xSi_1−xAl_xS₄ and Li_4−xSi_1−xP_xS₄ were determined by X-ray Rietveld analysis, and the electric and electrochemical properties were studied by electronic conductivity, ac conductivity and cyclic voltammogram measurements. The structure of the host material, Li₄SiS₄ is related to the γ-Li₃PO₄-type structure, and when the Li⁺ interstitials or Li⁺ vacancies were created by the partial substitutions of Al³⁺ or P⁵⁺ for Si⁴⁺, large increases in conductivity occur. The solid solution member x=0.6 in Li_4−xSi_1−xP_xS₄ showed high conductivity of 6.4×10^-4 S cm⁻¹ at 27°C with negligible electronic conductivity. The new solid solution, Li_4−xSi_1−xP_xS₄, also has high electrochemical stability up to ∼5 V vs Li at room temperature. All-solid-state lithium cells were investigated using the Li_3.4Si_0.4P_0.6S₄ electrolyte, LiCoO₂ cathode and In anode.     

Stereocontrolled intramolecular nitrile oxide cycloaddition reaction using a gauche-gauche interaction

A gauche-gauche interaction is proposed as a powerful controlling factor for the stereochemistry in the intramolecular nitrile oxide cycloaddition reaction derived from N-protected 3-(N-allylamino)propionaldehyde and 2-(N-homoallylamino)acetaldehyde oximes. High levels of stereoselectivity (76% de to perfect) were obtained from the reaction involving nitrile oxides with substituents at the adjacent carbon atom to the tether nitrogen.     

Palladium-catalyzed synthesis of indoles from 2-nitrostyrenes

In the presence of palladium salts, oxidation of 2-nitrostyrenes 1 with nitrous acid alkyl esters 2 resulted in the formation of 2-nitrophenylacetaldehyde dialkyl acetals 3. Reductive cyclization of the acetals 3 with iron powder in acetic acid afforded indoles 5 in good yield.     

Generation of NH-azomethine imine intermediates through the 1,2-hydrogen shift of hydrazones and their intermolecular cycloaddition reaction with olefinic dipolarophiles

The thermal 1,2-hydrogen shift of the hydrazone generates the NH-azomethine imine intermediate in the 4-oxo-4H-pyrido[1,2-a]pyrimidine-3-carbaldehyde system under mild conditions. Therein, the resulting NH-azomethine imine should be stabilized by forming an internal hydrogen bond with the carbonyl oxygen at the 4-position. Its smooth stereoselective intermolecular cycloaddition reaction with olefinic dipolarophiles giving pyrazolidine derivatives is discussed.     

Dicarboxylic degradation products of nonylphenol polyethoxylates. Determination and structural elucidation in water samples by solid-phase extraction and gas chromatography-mass spectrometry after methylation

A reliable method combining solid-phase extraction, derivatization and gas chromatography-chemical ionization mass spectrometry (GC-CI-MS) was developed for the measurement, in river and sewage effluent water, of four select model compounds of dicarboxylic metabolites (dm-CA(5-8)P1EC) and other dicarboxylic metabolites (CA(5-8)P1ECs) of nonylphenol polyethoxylates. These selected isomers were referred as dm-CA(5-8)P1ECs because they have an alpha,alpha-dimethyl configuration (expressed as "dm"), five to eight C atoms and a carboxyl group in the alkyl chain, and an ethoxy acetic acid group. The derivatization of terminal carboxyl groups was successful with (trimethylsilyl)diazomethane. The best extraction conditions were obtained using an Oasis HLB cartridge as a sorbent bed and 4 ml of MTBE/methanol (9:1, v/v) elution mixture. The method detection limits of 0.03-0.07 microg/l for dm-CA(5-8)P1ECs were attained in 500 ml pure water. The recovery was then evaluated for pure water, river and sewage effluent water samples. The high recoveries of typically >89% for each isomer indicated the high performance of the method. Although dm-CA(5-8)P1ECs were not detected in the collected water samples, 21 isomers of CA(5-8)P1ECs were identified by CI-MS and the tentative structures of six out of them were elucidated, mainly limited to the branch at alpha-C atom, by studying the EI-mass spectra. The relative concentrations of individual CA(5-8)P1EC metabolites were calculated based on dm-CA(5-8)P1ECs. The results showed that the main degradation on the nonyl chain occurred via the elimination of two carbon-units and the concentrations in Japan were much lower than those in Taiwan and Italy.     

Solid‐phase thermal polymerization of macrocyclic ethylene terephthalate dimer using various transesterification catalysts

Thermal ring‐opening polymerization of a uniform macrocyclic ethylene terephthalate dimer with and without catalyst was investigated for the first time. Although polymerization progressed without a catalyst, the reaction was extremely slow and all the products were colored. Various transesterification catalysts were tested for their activity toward this ring‐opening polymerization. Among the various catalysts, 1,3‐dichloro‐1,1,3,3‐tetrabutyldistannoxane exhibited the highest catalytic activity, and a colorless polymer with a weight‐average molecular weight of 36,100 was obtained in 100% yield by heating for 3 min at 200 °C. It is noteworthy that our method does not need a vacuum because no side products are formed during the process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3360–3368, 2000     

Synthesis and characterization of ordered polyurethanes from nonsymmetric diisocyanate and ethylene glycol

An ordered polyurethane with a head‐to‐head (H‐H) or tail‐to‐tail (T‐T) content over 95% was prepared by polyaddition reaction of a nonsymmetric monomer, p‐isocyanatobenzyl isocyanate (1) with a symmetric monomer, ethylene glycol (2). The model reactions were studied in detail to demonstrate the feasibility of polymer formation. The polymerization was conducted in THF in the presence of triethylamine (TEA) at 0 °C by slow addition of a half amount of 2 to 1, followed by removing THF and then adding the rest of 2 in DMF at once at 30 °C in the presence of dibutyltin dilaurate (DBTL). The microstructure of the polymer obtained was investigated by ¹³C NMR spectroscopy, and it was found that the polymer had the expected structural regularity. The constitutional regularity of polymers influenced their thermal properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2106–2114, 2000     

Synthesis of 2-phenylimidazo[2,1-b]benzothiazole derivatives as modulators of multidrug resistance for tumor cells

We have investigated 3-substituted-2-phenylimidazo[2,1-b]benzothiazole derivatives and herein we have discussed their pharmaceutical activities. We found that some 2-phenyl-5,6,7,8-tetrahydroimidazo[2,1-b]-benzothiazoles could overcome multidrug resistance for tumor cells. Among them, 2-phenyl-3-(N-methyl-3-piperidyl)carbonylammomiinomemyl-5,6,7,8-tetrahydVoimidazo[2,1-b]benzothiazole [N276-12] demonstrated the most potent activity for overcoming multidrug resistance.     

Preparation of cyclohepta and benzo[ef]cycl[3.2.2]azines

Some cyclohepta[ef]cycl[3.2.2]azines were prepared from cyclohepta[hi]indolizines and electron deficient acetylenes in the presence of appropriate oxidants. Also, benzo[ef]cycl[3.2.2]azines were obtained similarly in good yields.     

Competitive thermal ene reaction and Diels-Alder reactions of 2-[N-(alk-2-enyl)benzylamino]-3-vinylpyrido[1,2-a]pyrimidin-4(4H)-ones

Thermal reaction of 2-[N-(alk-2-enyl)benzylamino]-3-(2-substituted and 2,2-disubstituted)vinylpyrido[1,2-a]pyrimidin-4(4H)-ones gave azepine, the desired ene products, and/or pyran derivatives. The formation of the latter was responsible for the [4+2] cycloaddition reaction between the α,β-unsaturated ester carbonyl moiety as a diene part and the alkenylamino moiety as an ene one. The reaction features depended upon the kinds of substituents both on the vinyl and alkenyl counterparts; strongly electron-withdrawing substituents on the vinyl moiety or an electron-donating substituent on the alkenyl one changed the reaction feature from the ene reaction to the hetero Diels-Alder reaction.