Comparison of adsorbents for on-line solid-phase extraction of polycyclic aromatic hydrocarbons before liquid chromatography with UV detection

Summary On-line solid-phase extraction (SPE) coupled with reversed-phase liquid chromatography and UV detection at 254 nm has been used for the determination of trace-level polycyclic aromatic hydrocarbons (PAH) in soil extracts. Five commercially available adsorbents (C₈, C₁₈, PLRP-S, PRP-1, and Bond-Elut Env) were evaluated. Results showed that recovery of the PAH decreased with increasing molecular weight, because of their poorer solubility. Recovery of high-molecular-weight PAH was significantly improved by addition of 10% (v/v) acetonitrile to the sample before loading of the SPE adsorbent. PAH recovery ranged from 64.0 to 108% when a 50 mL sample spiked with 1 μg L⁻¹ was applied to these adsorbents. Determination of PAH was possible with detection limits below 0.05 μg L⁻¹, which corresponds to 0.2 μg kg⁻¹ soil. The method was successfully used to determine PAH in soil extracts.     

Investigation of Copper(II) Interference on the Anodic Stripping Voltammetry of Lead(II) and Cadmium(II) at Bismuth Film Electrode

The bismuth‐coated electrode is known to be prone to errors caused by copper(II). This study investigates copper(II) interference at bismuth film electrode for the detection of lead(II) and cadmium(II). It was conducted using glassy carbon electrode, while the bismuth film was plated in situ simultaneously with the target metal ions at ? 1200 mV. Copper(II) presented in solution significantly reduced the sensitivity of the electrode, for example there was an approximately 70 % and 90 % decrease in peak signals for lead(II) and cadmium(II), respectively, at a 10‐fold molar excess of copper(II). The decrease in sensitivity was ascribed to the competition between copper and bismuth or the metal ions for surface active sites. Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) analysis suggested a large decrease in the amount of bismuth nanoparticles formed on the electrode surface in the presence of copper(II) occurred, validating the competition between copper and bismuth ions for surface active sites. Recovery of the stripping signal of lead(II) and cadmium(II) was obtained by adding ferrocyanide ion to the solution. Finally, the proposed method was successfully applied to determine lead(II) and cadmium(II) in water samples and the method was validated by ICP‐MS technique.     

Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC–MS method

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-μm particle) and mobile phase. Mobile phase A contained KH₂PO₄ buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 μL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r² = 0.9995–0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC–MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.     

Speciation of Zn‐aminopolycarboxylic complexes by electrospray ionization mass spectrometry and ion chromatography with inductively coupled plasma mass spectrometry

The speciation of Zn‐aminopolycarboxylic complexes was investigated using both electrospray ionization mass spectrometry (ESI‐MS) and ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP‐MS). The resulting ESI mass spectra indicated that [Zn(HEDTA)]^1?, [Zn(NTA)]^1?, [Zn(EDTA)]^2? and [Zn(DTPA)]^3? were all simultaneously detected in solution; [Zn(NTA)]^1? exhibited the weakest intensity of all these Zn‐aminopolycarboxylic complexes. IC/ICP‐MS was also successfully used to separate Zn complexes by anion‐exchange chromatography using a mobile phase containing 30 mM (NH₄)₂HPO₄ at pH 7.5 giving reasonable resolution within 15 min. A weak peak attributable to the poor stability [Zn(NTA)]^1? ion was also observed using IC/ICP‐MS. With the exception of [Zn(NTA)]^1?, detection limits ranging from 0.5 to 1.0 µg/L were obtained and the proposed method was used for the determination of Zn aminopolycarboxylic complexes in soil solution. Copyright © 2009 John Wiley & Sons, Ltd.     

Volatile oil composition of Pogostemon heyneanus and comparison of its composition with patchouli oil

The volatile oil of the leaves of Pogostemon heyneanus Benth. (Lamiaceae) was analyzed by GC and GC-MS. Twenty-six components representing 96.0% of the oil were identified. The major components of the oil were acetophenone (51.0%), beta-pinene (5.3%), (E)-nerolidol (5.4%), and patchouli alcohol (14.0%). Comparison of the compositions of the oils of P. heyneanus and P. cablin (Blanco) Benth. (Patchouli oil) showed wide variation between them. Though 13 sesquiterpenes and oxygenated sesquiterpenes were detected in both oils, their concentrations in the oils differed widely. Acetophenone, benzoyl acetone and (E)-nerolidol present in the oil of P. heyneanus were not detected in patchouli oil.     

Composition of a monoterpenoid-rich essential oil from the rhizome of Zingiber officinale from north western Himalayas

The chemical composition of the essential oil from the rhizome of ginger (Zingiber officinale Roscoe), collected from Nahan, Himachal Pradesh, India, was determined by gas chromatography and GC-MS. Fifty-one compounds, representing 95.1% of the oil, were identified. The oil was characterized by relatively large amounts of the monoterpenoids 1,8-cineole (10.9%), linalool (4.8%), borneol (5.6%), alpha-terpineol (3.6%), neral (8.1%), geraniol (14.5%), geranial (9.5%), trans-dimethoxy citral (5.0%) and geranyl acetate (6.3%). Five compounds, namely trans-linalool oxide, trans-linalool oxide acetate, (Z)-dimethoxycitral, (E)-dimethoxy citral and epi-zingiberenol are reported for the first time in oil of ginger.     

Determination of Trace Lead and Cadmium in Water Samples by Anodic Stripping Voltammetry with a Nafion‐Ionic Liquid‐Coated Bismuth Film Electrode

A new chemically modified bismuth film electrode coated with an ionic liquid [(1‐ethyl‐3‐methylimidazolium tetracyanoborate (EMIM TCB)] and Nafion was developed for the simultaneous determination Pb²⁺ and Cd²⁺ by anodic stripping voltammetry. Compared with conventional bismuth film electrodes, this electrode exhibited greatly improved electrochemical activity for Pb²⁺ and Cd²⁺ detection due to the unique properties of Nafion polymer and ionic liquid. The key experimental parameters related to the fabrication of the electrode and the voltammetric measurements were optimized on the basis of the stripping signals, where the peak currents increased linearly with the metal concentrations in a range of 10–120 µg L^?1 with a detect limit of 0.2 µg L^?1 for Pb²⁺, and 0.5 µg L^?1 for Cd²⁺ for 120s deposition. High reproducibility was indicated from the relative standard deviations (1.9 and 2.5 %) for nine repetitive measurements of 20 µg L^?1 Pb²⁺ and Cd²⁺, respectively. In addition, the surface characteristics of the modified BiFE were investigated by scanning electron microscopy (SEM), and results showed that fibril‐like bismuth nanostructures were formed on the porous Nafion polymer matrix. Finally, the developed electrode was applied to determine Pb²⁺ and Cd²⁺ in water samples, indicating that this electrode was sensitive, reliable and effective for the simultaneous determination of Pb²⁺ and Cd²⁺.     

Determination of Bromate and Bromide in Seawater by Ion Chromatography, with an Ammonium Salt Solution as Mobile Phase, and Inductively Coupled Plasma Mass Spectrometry

A method has been developed for determination of bromate and bromide in water containing high concentrations of chloride (e.g. seawater). Separation of bromate and bromide on an anion-exchange column was followed by ICP–MS detection. To reduce interference of chloride with determination of bromate and bromide, and to avoid clogging, ammonium salts, for example NH₄H₂PO₄, (NH₄)₂HPO₄, (NH₄)₂CO₃, and NH₄NO₃ were examined as mobile-phase components. It was found that mobile phase containing 20 mM NH₄NO₃ at pH 5.80 was compatible with the anion-exchange column and enabled reasonable resolution and separation of bromate and bromide within 7 min. Detection limits for bromate and bromide ranged from 2.0 to 3.0 μg L⁻¹ for direct injection of 50 μL sample without matrix elimination. The proposed method was used for analysis of bromate and bromide in seawater.     

Speciation of iodate and iodide in seawater by non-suppressed ion chromatography with inductively coupled plasma mass spectrometry

A non-suppressed ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP-MS) has been developed for simultaneous determination of trace iodate and iodide in seawater. An anion-exchange column (G3154A/101, provided by Agilent) was used for the separation of iodate and iodide with an eluent containing 20 mM NH₄NO₃ at pH 5.6, which reduced the build-up of salts on the sampler and skimmer cones. The influences of competing ion (NO₃⁻) in the eluent on the retention time and detection sensitivity were investigated to give reasonable resolution and detection limits. Linear plots were obtained in a concentration range of 5.0–500 μg/L and the detection limit was 1.5 μg/L for iodate and 2.0 μg/L for iodide. The proposed method was used to determinate iodate and iodide in seawaters without sample pre-treatment with exception of dilution.