Sulfur-containing polymer and carbon materials based on poly(vinyl chloride)

New sulfur-containing copolymers based on poly(vinyl chloride) have been prepared by the nucleophilic substitution of chlorine atoms by sulfur atoms using sodium tetra- and pentasulfides. It has been shown that these copolymers can be carbonized to produce sulfur-containing carbon materials with residual chlorine content about 2 wt %.     

Preparation and properties of polyvinylenepolysulfides based on trichloroethene and sodium polysulfides

Interaction of trichloroethene with sodium tetra- and pentasulfide (prepared in turn from sodium sulfide and elemental sulfur) has lead to new family of polyvinylenepolysulfides containing up to 94% of sulfur. The polymers were found highly electrochemically active when applied as active cathode for lithium batteries.     

Synthesis and application of a novel solid-phase microextraction adsorbent: Hollow fiber supported carbon nanotube reinforced sol–gel for determination of phenobarbital

A novel solid-phase microextraction technique using a hollow fiber-supported sol–gel combined with multi-walled carbon nanotubes was employed in the determination of phenobarbital in wastewater. In this new technique, a silica-based, organic–inorganic polymer containing functionalized multi-walled carbon nanotubes (MWCNTs) was prepared with sol–gel technology via the reaction of tetraethylorthosilicate (TEOS) with an acidic catalyst (HCl). This sol was injected into a polypropylene hollow fiber segment for in situ gelation. This device operated in direct immersion sampling mode. The experimental setup is simple and affordable, and the device is disposable, so there is no risk of cross-contamination or carry-over. Parameters affecting extraction such as pH of the aqueous solution, ageing and extraction times, aqueous sample volume, agitation speed and carbon nanotube amount were optimized. Linearity was observed over a range of 0.50–5000 ng mL⁻¹, with an estimation coefficient (r²) higher than 0.982. The limit of detection (LOD) was 0.32 ng mL⁻¹ (n = 5), and repeatability (RSD% = 2.9) was from the average of three levels of analyte concentrations (1, 1000 and 4500 ng mL⁻¹) with three replicates for each within a single day. Finally, a pre-concentration factor of 2100 was obtained for phenobarbital.     

Synthesis and application of a novel solid-phase microextraction adsorbent: hollow fiber supported carbon nanotube reinforced sol-gel for determination of phenobarbital

The present study reports the development, validation and application of a new green liquid chromatographic method for the determination of glutathione (GSH) in vegetable samples. In this work we introduce—for the first time—ethyl propiolate (EP) as an advantageous post-column derivatization reagent for thiolic compounds. GSH (t_R = 6.60 min) and N-acetylcysteine (NAC, internal standard) (t_R = 11.80 min) were separated efficiently from matrix endogenous compounds by using a 100% aqueous mobile phase (0.1%, v/v CH₃COOH in 1 mmol L⁻¹ EDTA, Q_V = 0.5 mL min⁻¹) and a Prevail^® reversed phase column that offers the advantage of stable packing material in aqueous mobile phases. The parameters of the post-column reaction (pH, amount concentration of the reagent, flow rates, length of the reaction coil and temperature) were studied. The linear determination range for GSH was 1–200 μmol L⁻¹ and the LOD was 0.1 μmol L⁻¹ (S/N = 3). Total endogenous GSH was determined in broccoli, potato, asparagus and Brussels sprouts using the standards addition approach. The accuracy was evaluated by both recovery experiments (R = 91–110%) and comparison to an o-phthalaldehyde/glycine corroborative post-column derivatization fluorimetric method.     

HPTLC Procedure for Determination of Levonorgestrel in the Drug-Release Media of an In-situ-Forming Delivery System

JPC – Journal of Planar Chromatography – Modern TLC -     

Conjugation of pectin biopolymer with Au-nanoparticles as a drug delivery system: Experimental and DFT studies

In the present study, pectin-coated gold nanoparticles (GNPs) were used as a candidate for curcumin drug delivery. The effect of the size of synthesized GNPs was examined, as an important factor on the yield of drug delivery. For this purpose, three different sizes of GNPs were first synthesized using a chemical method. The synthesized nanoparticles were then coated with pectin biopolymer. Finally, curcumin drug was loaded in a pectin@GNPs complex. Various methods such as UV–vis spectrophotometry, dynamic light scattering, scanning electron microscopy and Fourier-transform infrared spectroscopy were used to characterize the synthesized GNPs and pectin@GNPs. The encapsulation efficiency and the release percentage of the drug were calculated for two different pH values. Further, an antibacterial study was conducted. The results revealed that 100 nm GNPs had the highest encapsulation efficiency. An investigation of the release rate of curcumin drug at 37°C for 48 h indicated that the amount of drug released was higher in acidic pH than at pH 7.4 with a slow release rate. The electronic structure and the adsorption properties of pectin–GNPs complex were examined using the density functional theory method.     

1-Vinyl-1,2,4-triazole in copolymerization reaction with 1-vinyl-4,5,6,7-tetrahydroindole: synthesis and properties of copolymers

A radical copolymerization of 1-vinyl-1,2,4-triazole (VTA) with 1-vinyl-4,5,6,7-tetrahy-droindole (VTHI) was studied. New thermally stable functional copolymers of different composition, well soluble in organic solvents were synthesized. It was found that VTA has higher reactivity as compared to VTHI. A new soluble polymeric nanocomposite with metallic silver nanoparticles encapsulated into the matrix of synthesized copolymer was obtained.     

Acid-base properties of poly(1-vinylazoles) in aqueous solution

The interaction of poly(1-vinylimidazole) and poly(1-vinyl-1,2,4-triazole) with HCl and alkalies in aqueous and water-salt solutions was investigated by potentiometric titration, viscosimetry, ¹H and ¹³C NMR, and UV spectroscopy. The effect of the nature and concentration of low-molecular counterions was found. The interaction of poly(1-vinylazoles) with the acid results in the protonation of the azole cycle. The interaction of poly(1-vinylazoles) with alkalies is stipulated by the capability of the pyridine N atom of forming a coordination bond with the metal ion and that of the unsaturated pi-system of the heterocycle of coordinating with the anions.     

Ethene loss kinetics of methyl 2-methyl butanoate ions studied by threshold photoelectron-photoion coincidence: The enol ion of methyl propionate heat of formation

Threshold photoelectron-photoion coincidence (TPEPICO) spectroscopy has been used to investigate the unimolecular chemistry of gas-phase methyl 2-methyl butanoate ions [CH₃CH₂CH(CH₃)COOCH₃^·+]. This ester ion isomerizes to a lower energy distonic ion [CH₂CH₂CH(CH₃)COHOCH₃^·+] prior to dissociating by the loss of C₂H₄. The asymmetric time of flight distributions, which arise from the slow rate of dissociation at low ion energies, provide information about the ion dissociation rates. By modeling these rates with assumed k(E) functions, the thermal energy distribution for room temperature sample, and the analyzer function for threshold electrons, it was possible to extract the dissociative photoionization threshold for methyl 2-methyl butanoate which at 0 K is 9.80 ± 0.01 eV as well as the dissociation barrier of the distonic ion of 0.86 ± 0.01 eV. By combining these with an estimated heat of formation of methyl 2-methyl butanoate, we derive a 0 K heat of formation of the distonic ion CH₂CH₂CH(CH₃)COHOCH₃^·+ of 101.0 ± 2.0 kcal/mol. The product ion is the enol of methyl propionate, CH₃CHCOHOCH₃^·+, which has a derived heat of formation at 0 K of 106.0 ± 2.0 kcal/mol.