Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Heterocyclisations des hydroxy-6 methoxy-2 hexene-2 et heptene-2 oates de methyle.

Tetrahydropyran derivatives – and – are formed in good yields by cyclisation of methyl-6-hydroxy-2-hexenoate or 2-heptenoate mediated by various electrophilic reagents (mCPBA, benzeneselenyl chloride, N-bromosuccinimide, iodine). Cyclisations of Z and E isomers are stereospecific. The diastereoselectivity of cyclisation of the secondary alcohol varies with the nature of the electrophilic reagent.     

A study of the interaction energy between a glycoluril molecular clip and dihydroxybenzenes or diaminobenzenes: a justification for easy separation by affinity chromatography

Theoretical calculations were performed to determine the interaction energy between a glycoluril (GL) molecular clip and hydroxybenzenes (HBs) and aminobenzenes (ABs). The theoretical calculations on the GL and its interactions were carried out using the hybrid functional closed-shell RB3LYP and the 6-31G* basis set, employing gaussian 03. The stability in energy of the guest inside the GL, ΔE_T(1), was in the following order: m-DHB-GL > o-DHB-GL > m-THB-GL > m-DAB-GL > o-THB-GL. The geometric parameters, in particular the bond lengths are discussed for the host molecule GL and guest molecules DHB and DAB and their parameters are compared with the host-guest molecules DHB-GL and DAB-GL, respectively.     

N.m.r. spectra of cyclic amines. II—Factors influencing the chemical shifts of α-protons in aziridines

Proton magnetic resonance spectra of trans and cis-2,3-diphenylaziridine (1 and 2) and their N-ethyl derivatives 3 and 4 were measured in carbon tetrachloride, chloroform, and benzene-d₆ at low temperatures (1 and 3) and in dry conditions (1 and 2). On the basis of these results it was concluded that an N-ethyl group exerts a shielding influence on a cis ring proton and a deshielding influence on a trans ring proton. From results obtained by measuring the ¹H n.m.r. spectra of 1–4 in deuterochlorofom-trifluoroacetic acid it was derived that the lone pair of the aziridine nitrogen exerts a shielding influence on cis related ring hydrogens. In most N-alkylaziridines the effect of the N-alkyl group predominates.     

Characterization of counterion and surface influence on micelle formation using tapping mode atomic force microscopy in air

Cylindrical micelles prepared in aqueous solutions from cationic surfactants octadecyl trimethylammonium (OTA+) or cetyltrimethylammonium (CTA+) and parachlorobenzoate (PCB) counterion were successfully imaged after evaporation of water using tapping mode atomic force microscopy (TM-AFM) onto very smooth gold and glass substrates. With the help of the obtained topography AFM images, it was shown that the micellar structures are preserved on gold substrates after evaporation of the solvent despite the new set of stresses due mainly to capillary forces and dehydration. The influence of the substrate on the resulting micellar morphology observed in air was investigated for these two materials: cylindrical micelles were evidenced as loosely adherent on gold surface in the presence of parachlorobenzoate (PCB) and identical, geometrically speaking, to those known to exist in aqueous solutions. In this situation, topographic AFM images allowed us to determine accurately their geometrical characteristics such as diameter and length in the nanometer range. On the other hand, AFM images obtained in air on glass surfaces revealed micellar structures that are different from those existing in the bulk of the solution. Indeed, bilayer-type micelles with a thickness close to twice the surfactant monomer expected length were observed, indicating that the well-established and strong influence of glass on micelle geometry at the glass/solution interface is maintained after evaporation of water. These results have been analyzed on the basis of positive charge of gold deduced from electrochemical impedance spectroscopy (EIS) and Raman spectroscopy measurements on one hand and of the negative charge of glass on the other hand. Although these results appeal to new theoretical considerations dealing with dynamics of evaporation of micellar solution drops and/or with counterion contributions to macromolecular interactions in aqueous solutions and in air, this new AFM imaging method appears to be the more adequate one to image and measure the micelles formed in the presence of water.     

Warm tachyon inflation and swampland criteria

In this study, the scenario of a two-component warm tachyon inflation is considered, where the tachyon field plays the role of the inflaton by driving the inflation. During inflation, the tachyon scalar field interacts with the other component of the Universe, which is assumed to be photon gas, i.e., radiation. The interacting term contains a dissipation coefficient, and the study is modeled based on two different and familiar choices of the coefficient that were studied in the literature. By employing the latest observational data, the acceptable ranges for the free parameters of the model are obtained. For any choice within the estimated ranges, there is an acceptable concordance between the theoretical predictions and observations. Although the model is established based on several assumptions, it is crucial to verify their validity for the obtained values of the free parameters of the model. It is found that the model is not self-consistent for all values of the ranges, and for some cases, the assumptions are violated. Therefore, to achieve both self-consistency and agreement with the data, the parameters of the model must be constrained. Subsequently, we consider the recently proposed swampland conjecture, which imposes two conditions on the inflationary models. These criteria rule out some inflationary models; however, warm inflation is among those that successfully satisfy the swampland criteria. We conduct a precise investigation, which indicates that the proposed warm tachyon inflation cannot satisfy the swampland criteria for some cases. In fact, for the first case of the dissipation coefficient, in which, there is dependency only on the scalar field, the model agrees with observational data. However, it is in direct tension with the swampland criteria. Nevertheless, for the second case, wherein the dissipation coefficient has a dependency on both the scalar field and temperature, the model exhibits acceptable agreement with observational data, and suitably satisfies the swampland criteria.     

Measurement of soil/dust arsenic by gas phase chemiluminescence

A gas phase chemiluminescence (GPCL)-based method for trace measurement of arsenic has been recently described for the measurement of arsenic in water. The principle is based on the reduction of inorganic As to AsH₃ at a controlled pH (the choice of pH governs whether only As(III) or all inorganic As is converted) and the reaction of AsH₃ with O₃ to produce chemiluminescence (Idowu et al., Anal. Chem. 78 (2006) 7088-7097). The same general principle has also been used in postcolumn reaction detection of As, where As species are separated chromatographically, then converted into inorganic As by passing through a UV photochemical reactor followed by AsH₃ generation and CL reaction with ozone (Idowu and Dasgupta, Anal. Chem. 79 (2007) 9197-9204). In the present paper we describe the measurement of As in different soil and dust samples by serial extraction with water, citric acid, sulfuric acid and nitric acid. We also compare parallel measurements for total As by induction coupled plasma mass spectrometry (ICP-MS). As(V) was the only species found in our samples. Because of chloride interference of isobaric ArCl⁺ ICP-MS analyses could only be carried out by standard addition; these results were highly correlated with direct GPCL and LC-GPCL results (r² = 0.9935 and 1.0000, respectively). The limit of detection (LOD) in the extracts was 0.36 μg/L by direct GPCL compared to 0.1 μg/L by ICP-MS. In sulfuric acid-based extracts, the LC-GPCL method provided LODs inferior to those previously observed for water-based standards and were 2.6, 1.3, 6.7, and 6.4 μg/L for As(III), As(V), dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA), respectively.     

Necklace-like hollow carbon nanospheres from the pentagon-including reactants: synthesis and electrochemical properties

Necklace-like hollow carbon nanospheres (CNSs) have been successfully synthesized from the pentagon-including reactants, which provide an auxiliary example for the theoretical prediction that necklace-like hollow CNSs are assumed to be composed of the regular occurrence of nonhexagonal rings at the atomic level. Benefits of the as-obtained hollow CNSs also arise from the high Brunauer-Emmett-Teller value of 594.32 m(2)/g and a narrow pore distribution at 5 nm. The electrochemical hydrogen storage experiments for the as-obtained necklace-like hollow CNSs exhibit a capacity of 242 mAh/g at the current density of 200 mA/g, corresponding to a hydrogen storage of 0.89 wt %, which is higher than the previously reported electrochemical capacities for the multiwalled carbon nanotubes (MWCNTs). Furthermore, the as-obtained necklace-like hollow CNSs show a lithium capacity advantage compared with the carbon solid particles for application in lithium batteries. These results indicate that the necklace-like hollow CNSs provide a new candidate for the application in hydrogen storage and lithium batteries.     

Pilot scale-up and shelf stability of hydrogel wound dressings obtained by gamma radiation

This study is aimed of producing pilot batches of hydrogel wound dressings by gamma radiation and evaluating their shelf stability. Six batches of 3L capacity were prepared based on poly(vinyl pyrrolidone), agar and polyethylene glycol and they were dispensed in polyester trays, covered with polyester films and sealed in two types of materials: polyethylene bags and vacuum polyethylene bags. Dressings were formed in a single step process for the hydrogel formation and sterilization at 25–30 kGy gamma radiation dose in a JS-9500 Gamma Irradiator (Nordion, Canada). The six batches were initially physicochemical characterized in terms of dimensions and appearance, gel fraction, morphology analysis, hydrogel strength, moisture retention capability and swelling capacity. They were kept under two storage conditions: room temperature (T: 30±2 °C/RH: 70± 5%) and refrigerated temperature (T: 5±3 °C) during 24 months and sterility test was performed. The appearance of membranes was transparent, clear, uncut and flexible; the gel fraction of batches was higher than 75% and the hydrogel surface showed a porous structure. There was a slow decrease of the compression rate 20% until 7 h and about 70% at 24 h. Moisture retention capability in 5 h was similar for all the batches, about 40% and 60% at 37 °C and at room temperature respectively. The swelling of hydrogels in acidic media was strong and in alkaline media the weight variation remains almost stable until 24 h and then there is a loss of weight. The six batches remained sterile during the stability study in the conditions tested. The pilot batches were consistent from batch to batch and remained stable during 24 months.