MIR imaging bundles of ordered silver halide polycrystalline fibres for thermal transmission and imaging

This study aims to experimentally examine the energy-saving potential by using R-134a filled separated two-phase thermosiphon loop (STPTL) for data center applications. A parametric study had been made to compare the energy consumption of two data center racks. Two fin-and-tube heat exchangers were attached to one of the racks to form two individual thermosiphon loops. The experiments were carried out subject to different operating conditions, including three ambient temperatures (20 °C, 23 °C, and 27 °C) and filling ratios ranging from 30 to 90% in association with heating loads ranging between 1.5 kW and 6 kW. Parametric influences regarding concentrated heat loading or uniform heat loading are studied. It was found that an appreciable energy-savings can be obtained at high filling ratios and a maximum of 49% energy-saving with the assistance of thermosiphon is observed. Accordingly, the rising of system pressure will result in noticeable savings. Relative to the uniform heat loading of the data rack, the thermosiphon shows even more energy-saving potential in concentrated heat loading. This phenomenon is more pronounced at a lower ambient temperature like 20 °C. On the other hand, there is no appreciable energy-saving for the thermosiphon between concentrated and uniform heating loads when the ambient temperature is high (27 °C). Furthermore, the influence of airflow rate was also investigated under various ambient temperatures with a 90% filling ratio and a heating load of 6 kW. The results revealed that the lower airflow rate in the thermosiphon yields comparatively better energy-saving than the higher flow rate. The study on the influence of using two STPTLs indicated that 15–23% energy-saving can be achieved at a 90% filling ratio and 6 kW heating load for all the studied ambient conditions if compared with testing each loop separately. Lower thermal resistance is seen at the higher filling ratios, ambient temperatures, and heating loads.

     

Structure and magnetocaloric properties of La1−xKxMnO3 manganites

A technology of obtaining the single-phase ceramic samples of La_1−xK_xMnO₃ manganites and the dependence of their structural parameters on the content of potassium has been described. Magnetocaloric effect (MCE) in the obtained samples has been measured by two independent methods: classical direct methodic and a method of magnetic field modulation. The values of MCE obtained by both methods substantially differ. The explanation of the observed divergences is given. The correlation between the level of doping and MCE value has been defined. The value of T_C determined by the MCE maximum conforms with the literature data obtained by other methods.     

Mixed ligand complexes of AEE hexafluoroacetylacetonates with diglyme: Synthesis,crystal structure and thermal behavior

The novel mixed ligand complexes [Ca(hfa)₂(diglyme)(H₂O)] (I), [Sr(hfa)₂(diglyme)(H₂O)] (II) and [Ba(hfa)₂(diglyme)₂] (III) (Hhfa = 1,1,1,5,5,5-hexafluoropentane-2,4-dione, diglyme = 2,5,8-trioxanonane) were synthesized by the reactions of the alkaline earth element (AEE) carbonates in n-hexane with a mixture of Hhfa and diglyme, and they were characterized by elemental analysis, ¹H and ¹³C NMR, and FTIR spectroscopy. The crystal structures of I–III, consisting of mononuclear isolated molecules, have been determined. The thermal behavior and composition of the vapor phase have been studied for I–III by thermal analysis at low pressure and mass spectrometry using a Knudsen cell. The stability of the mixed ligand complexes [M(hfa)₂(diglyme)_n] to the removal of diglyme molecules under heating decreases in the row I > II ≈ III, and only I evaporates as the mixed ligand complex after water removal.     

First findings of monocrystalline aragonite inclusions in garnet from diamond-grade UHPM rocks (Kokchetav Massif, Northern Kazakhstan)

The crystal field effect and microscopic origins of the Zeeman g-factors g(//) and g(⊥) for (6)S(3d(5)) state ions at tetragonal symmetry crystal filed, taking into account the spin-spin (SS), the spin-other-orbit (SOO), and the orbit-orbit (OO) magnetic interactions besides the well-known spin-orbit (SO) magnetic interaction, have been investigated using the microscopic spin Hamiltonian theory and the complete diagonalization method (CDM). It is found that the g(//)(±1/2)≠g(//)(±5/2) and g(⊥)(±1/2)≠g(⊥)(±5/2), where the g-factors g(//)(±1/2) and g(⊥)(±1/2) express the g-factors of the ground state |M?(s)=±1/2), whereas the g-factors g(//)(±5/2) and g(⊥)(±5/2) express the g-factors of the ground state |M?(s)=±5/2). It is shown that although the SO magnetic interaction is the most important one, the contributions to the shifts of g-factors Δg(//)(=2.0023-g(//)) and Δg(⊥)(=2.0023-g(⊥)) from other three magnetic interactions including the SS, SOO, and OO magnetic interactions are appreciable and should not be omitted, especially for the shifts of g-factors Δg(//)(±5/2) and Δg(⊥)(±5/2). The individual contributions to the shifts of g-factors arising from the spin quartet states and spin doublet states have been studied. The investigations show that the Δg(//)(±1/2) and Δg(⊥)(±1/2) primarily result from the spin quartet states, whereas Δg(//)(±5/2) and Δg(⊥)(±5/2) from the spin quartet states as well as the combined effects between the spin quartet states and the spin doublet states. The contribution to the shifts of g-factors from the net spin doublet states is zero.     

Heteroligand Lanthanide Dialkyldithiocarbamate Complexes with 1,10-Phenanthroline: A New Approach to Synthesis and Application for the Preparation of Sulfides

A new simple method of synthesis of heteroligand complexes [Ln(Dalkdtc)₃Phen] (Ln = Eu or Er; Dalkdtc is the dialkyldithiocarbamate ion, Phen is o-phenanthroline) in an aqueous solution is described; the possibility of using the complexes as initial reagents for the synthesis of rare-earth sulfides is shown.     

Heterometallic nickel(II) samarium(III) diethylenetriaminepentaacetate, a starting material for the preparation of samarium nickelate films

A reaction of samarium oxide, nickel oxocarbonate, and diethylenetriaminepentaacetic acid (H₅DTPA) taken in stoichiometric proportions in water gave SmNiDTPA · 10H₂O as a glassy solid. The formation of this heterometallic complex was confirmed by data from elemental analysis, IR spectroscopy, thermal analysis, and X-ray fluorescence analysis. An aqueous solution of the complex was used to deposit SmNiO₃ films onto a single-crystal SrTiO₃(001) substrate. The SmNiO₃ phase in films obtained upon 3-h annealing at 500°C was identified by powder X-ray diffraction. Films deposited from a solution of an equimolar mixture of monometallic samarium and nickel diethylenetriaminepentaacetates contained no samarium nickelate.     

Increasing the sorption activity of carbon adsorbents by electron-beam processing and fullerene microadditives

The sorption capacity of activated carbon with respect to Cu²⁺ cations was found to be enhanced considerably upon its chemical modification with fullerenes and during its electron-beam processing. It was discovered that introducing fullerenes (20 μg/g) into activated carbon leads to a change in the chemical composition of its surface, due to changes in the system of conjugated bonds in activated carbon leading to an increase in the content of Br?nsted acid (pK _a 0–5) and weakly base (pK _a 8–11) sites capable of cation exchange on the material surface. We conclude that electron-beam processing (optimal dose, 25–50 kGy) facilitates the rearrangement of bonds on the surface of activated carbon, thereby increasing the number of Lewis base and Br?nsted acid sites capable of adsorbing metal ions in accordance with the donor-acceptor and cation-exchange mechanism, respectively.     

Magnetocaloric properties of La<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>K<Emphasis Type="Italic">x</Emphasis>MnO<Subscript>3</Subscript> manganites

A technology for obtaining single-phase ceramic samples of La_{1 − x} K _x MnO₃ manganites, as well as the dependence of their structure parameters on the potassium content, is described. The magnetocaloric effect in the samples has been measured by two direct methods, the classical method and the magnetic field modulation method, and has been calculated from the specific heat data. The values of the magnetocaloric effect obtained by these methods are significantly different. The observed discrepancies have been explained. Correlation between the doping level and the value of the effect has been found. It has been shown that the magnetic-field dependence of variation of the magnetic entropy near T _C in weak fields corresponds to theoretical calculations and that the value of the magnetocaloric effect in high magnetic fields can be predicted using this dependence.