Buckling of a stiff thin film on a compliant substrate in large deformation

A finite-deformation theory is developed to study the mechanics of thin buckled films on compliant substrates. Perturbation analysis is performed for this highly nonlinear system to obtain the analytical solution. The results agree well with experiments and finite element analysis in wavelength and amplitude. In particular, it is found that the wavelength depends on the strain. Based on the accurate wavelength and amplitude, the membrane and peak strains in thin films, and stretchability and compressibility of the system are also obtained analytically.     

Small and high-density GeSiC dots stacked on buried Ge hut-clusters in Si

Self-assembled GeSiC dots stacked on a Ge hut-cluster layer buried in Si have been investigated. The critical thickness for formation of GeSiC dots is reduced owing to the strain fields from the buried hut-clusters. By utilizing the stacked structure, the dot size is decreased and the uniformity is improved. The highest density of the GeSiC dots with stacked structures is 7.4×10¹⁰ cm⁻², which is six times larger than that of single GeSiC dots. The formation of the self-assembled GeSiC dots is strongly influenced by being stacked with buried Ge dots as well as C incorporation.     

On the factor-thickness of regular graphs

For eachr-regular graphG, define a binary sequence(G) = ( ₁, ₂,..., _r-1) by _k = 0 ifG has ak-factor, and _k = 1 otherwise. A binary sequence = ( _i |i = 1, 2,...,r – 1) is said to be realizable if there exists anr-regular graphG such that(G) = . In this paper we characterize all binary sequences which are realizable.     

Determination of sulfite in Oriental herbal medicines

Sulfite was detected in 7 varieties of Oriental herbal medicines (Pueraria radix, Zingiberis rhizoma, Platycodon radix, Adenophora radix, Pinellia tuber, Astragalus radix, and Paeonia radix) on the Korean market. Sulfiting of commercial Oriental herbal medicines by fumigation with burning bituminous coal was simulated, and the accumulation of sulfite was investigated by using fresh Platycodon radix roots obtained from a growing field. The sulfite level reached a plateau in 9 h, and the maximum sulfite level found by the Monier-Williams (MW) method (AOAC 990.28) was 1020 ppm. The sulfite content in the simulated Platycodon radix sample determined by alkali extraction followed by ion-exclusion chromatography with electrochemical detection (AOAC 990.31) was approximately 17% lower on average than the MW results. Free-sulfite levels determined by acid extraction and ion-exclusion chromatography with electrochemical detection were between 19 and 49% of the MW results. The advantages of different methods for sulfite determination and the significance of the results are discussed.     

Determination of sulfates of androsterone and epiandrosterone in human serum using isotope diluted liquid chromatography-electrospray ionization-mass spectrometry

A promising liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) for analysis of the sulfates of 5alpha-androgen, androsterone and epiandrosterone (A-S and EpiA-S) in human serum was developed. The method was used to assess one of the markers of 5alpha-reductase activity of males including patients with prostate cancer (PC). After deproteinization with acetonitrile, the androgen sulfates and the internal standard, [7,7,16,16-2H4]dehydroepiandrosterone-S, were extracted from human serum using a solid-phase extraction cartridge and washed with hexane. The extract was reconstituted and applied to the LC/ESI-MS system operated in the selected ion monitoring mode. The method was validated over the range 0.02-5 microg/mL (A-S) and 0.005-1.5 microg/mL (EpiA-S) using 10 microL of human serum. The method was a concise procedure without chemical or enzymatic hydrolysis of the conjugates, purification by high-performance liquid chromatography and/or derivatization, and proved to be satisfactory in its reproducibility and accuracy. The levels of these androgen sulfates tended to decrease during aging, and the A-S levels in the sera obtained from both healthy males and patients with PC were correlated with their EpiA-S levels.     

Synthesis of well-defined polymers with protected silanol groups by atom transfer radical polymerization and their use for the fabrication of polymeric nanoparticles

Copper-mediated atom transfer radical polymerization (ATRP) of a protected silanol group-holding methacrylate, methacryloxypropyltrimethoxysilane (MOPS), was investigated. In a dry condition using carefully distilled solvent and monomer, the polymerization proceeded in a living fashion providing a low-polydispersity polymer with a predicted molecular weight. The ATRP in conjunction with the sequential monomer addition of methyl methacrylate (MMA) and MOPS afforded a block copolymer of the type PMMA-b-poly(MMA-r-MOPS). The heat treatment of a solution of the block copolymer in the presence of a catalytic amount of ammonia gave a polymeric core-shell nanoparticle with a shell of PMMA moieties and a core of the poly(MMA-r-MOPS) blocks cross-linked via the condensation of the trimethoxysilane groups of the MOPS moieties.     

Unusually stable molecular capsule formation of a tetraphenyleneurea cavitand

An unusually stable molecular capsule was formed by heating phenyleneurea-spanned resorcinarene cavitand with 4-methyl-N-p-tolylbenzamide. The molecular capsule behaved as a discrete molecular entity showing a cylindrical D(4d) structure and showed no guest exchange in toluene-d(8) even at 100 degrees C. [structure: see text]     

Separation and sensitive determination of arsenic species (As/As) using the yeast-immobilized column and hydride generation in ICP–AES

Inorganic arsenic was separated using the yeast-immobilized column. Saccharomyces cerevisiae was covalently bonded unto the controlled pore glass, which showed selective preconcentration of As⁵⁺ over As³⁺. The effluent was directly connected to hydride generation (HG) to increase sensitivity. The optimum pH condition for the retainment of arsenic at the column was 7. As⁵⁺ and As³⁺ were completely separated in a few minutes with the flow rate of 1.5 ml min⁻¹. Three molars of nitric acid was adequate both for the elution of As⁵⁺ and hydride generation. The accuracy of the technique was tested with NIST SRMs. Quantitative analysis of arsenic species for herbicide, pesticide, and cigarette were performed, and the results showed good agreements with the suggested values. Yeast-immobilized column-HG-ICP showed a promising future for the arsenic speciation study.