Fabrication of Pre-tilted Vertical Alignment Layers for High-Speed Liquid Crystal Display Using Bi-functional Photoreactive Monomers

Abstract

To enable recent 3D and moving picture applications, liquid crystal displays (LCD) must exhibit fast response and wide viewing angle characteristics. Pre-tilted vertical alignment layers for high-speed LCD were fabricated using bi-functional photoreactive monomers. The monomers can be confined to the polyimide layer and photo-polymerized by UV exposure under voltage. Response characteristics of photo-controlled alignment films according to the structure were investigated. Vertical alignment properties were evaluated using a polarizing optical microscope, and electro-optical characteristics were compared through the voltage-transmittance curve and response time measurement. Faster response speed could be obtained by using photoreactive monomers having a long alkyl chain.     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

聚苯硫醚熔体的压致凝固行为

采用施加压力的方法将聚苯硫醚熔体凝固,凝固后获得的聚苯硫醚样品经过降温和卸压后在常温常压下回收. X射线衍射和差示扫描量热分析表明:约20 ms时间的快速压缩过程可以抑制熔体结晶,制备出非晶态聚苯硫醚块材,样品的表面及中心都是非晶态.非晶态聚苯硫醚的玻璃化转变温度和晶化温度分别为318和362 K.常压下的退火实验表明,非晶态聚苯硫醚在425 K等温结晶的产物为正交相晶型.压致凝固法中熔体的凝固不是靠温度变化,而是靠压力变化,样品表面和内部处在一致的温度下同时受压凝固,避免了热传导对非晶尺寸的影响,因此非常有利于获得结构均匀的大尺寸非晶态材料.     

Quantitative determination of bilobetin in rat plasma by HPLC–MS/MS and its application to a pharmacokinetic study

Although bilobetin, a biflavone isolated from the leaves of Ginkgo biloba, represents a variety of pharmacological activities, to date there have been no validated determination methods for bilobetin in biological samples. Thus, we developed a liquid chromatographic method using a tandem mass spectrometry for the determination of bilobetin in rat plasma. After protein precipitation with acetonitrile including diclofenac (internal standard), the analytes were chromatographed on a reversed-phased column with a mobile phase of purified water and acetonitrile (3:7, v/v, including 0.1% formic acid). The ion transitions of the precursor to the product ion were principally deprotonated ions [M − H]⁻ at m/z 551.2 → 519.2 for bilobetin and 296.1 → 251.7 for the IS. The accuracy and precision of the assay were in accordance with US Food and Drug Administration regulations for the validation of bioanalytical methods. This analytical method was successfully applied to monitor plasma concentrations of bilobetin over time following intravenous administration in rats.     

A Sm(III) Coordination Polymer Containing 2,5-Furandicarboxylic Acid: Crystal Structure and Recognition of Oxalate in Water

Crystallography Reports - The {[Sm2(FDC)2](FDC) · 10H2O}n complex, where H2FDC is a 2,5-furandicarboxylic acid, has been prepared by hydrothermal reaction and structurally characterized by...     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Cobalt Based Nanoparticles Embedded Reduced Graphene Oxide Aerogel for Hydrogen Evolution Electrocatalyst

Efficient water electrolysis catalyst is highly demanded for the production of hydrogen as a sustainable energy fuel. It is reported that cobalt derived nanoparticle (CoS₂, CoP, CoS|P) decorated reduced graphene oxide (rGO) composite aerogel catalysts for highly active and reliable hydrogen evolution reaction electrocatalysts. 7 nm level cobalt derived nanoparticles are synthesized over graphene aerogel surfaces with excellent surface coverage and maximal expose of active sites. CoS|P/rGO hybrid aerogel composites show an excellent catalytic activity with overpotential of ≈169 mV at a current density of ≈10 mA cm^?2. Accordingly, efficient charge transfer is attained with Tafel slope of ≈52 mV dec^?1 and a charge transfer resistance (R_ct) of ≈12 Ω. This work suggests a viable route toward ultrasmall, uniform nanoparticles decorated graphene surfaces with well‐controlled chemical compositions, which can be generally useful for various applications commonly requiring large exposure of active surface area as well as robust interparticle charger transfer.