Identifying aspirin polymorphs from combined DFT-based crystal structure prediction and solid-state NMR

A combined experimental and computational approach was used to distinguish between different polymorphs of the pharmaceutical drug aspirin. This method involves the use of ab initio random structure searching (AIRSS), a density functional theory (DFT)-based crystal structure prediction method for the high-accuracy prediction of polymorphic structures, with DFT calculations of nuclear magnetic resonance (NMR) parameters and solid-state NMR experiments at natural abundance. AIRSS was used to predict the crystal structures of form-I and form-II of aspirin. The root-mean-square deviation between experimental and calculated ¹H chemical shifts was used to identify form-I as the polymorph present in the experimental sample, the selection being successful despite the large similarities between the molecular environments in the crystals of the two polymorphs.     

A high‐resolution scheme for low Mach number flows

A method for computing low Mach number flows using high‐resolution interpolation and difference formulas, within the framework of the Marker and Cell (MAC) scheme, is presented. This increases the range of wavenumbers that are properly resolved on a given grid so that a sufficiently accurate solution can be obtained without extensive grid refinement. Results using this scheme are presented for three problems. The first is the two‐dimensional Taylor–Green flow which has a closed form solution. The second is the evolution of perturbations to constant‐density, plane channel flow for which linear stability solutions are known. The third is the oscillatory instability of a variable density plane jet. In this case, unless the sharp density gradients are resolved, the calculations would breakdown. Under‐resolved calculations gave solutions containing vortices which grew in place rather than being convected out. With the present scheme, regular oscillations of this instability were obtained and vortices were convected out regularly. Stable computations were possible over a wider range of sensitive parameters such as density ratio and co‐flow velocity ratio. Copyright © 2004 John Wiley Sons, Ltd.     

Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

Characterization of the Nanoscale Microstructure of an Immersion Silver on Sputtered Copper

1 INTRODUCTION Silver and its compounds have received much attention due to their current and potential applica- tions in many areas[1, 2]. As a metal with the highest electrical and thermal conductivities, silver was one of the most important noble metals used in electrical industries in the last century. Several decades ago, however, the development of silver application in electronic area seemed not so quick. The fear for some undesirable phenomena involving silver, like “electrochemi…     

Thermal activation of molecularly-wired gold nanoparticles on a substrate as catalyst

The ability to prepare nanostructured metal catalysts requires the ability to control size and interparticle spatial and surface access properties. In this work, we report novel findings of an atomic force microscopic investigation of a controlled thermal activation strategy of gold catalysts nanostructured via molecular wiring or linking on a substrate surface. Gold nanocrystals of approximately 2 nm diameter capped by decanethiolate and wired by 1,9-nonanedithiolate on mica substrates were studied as a model system. By manipulating the activation temperature (200-250 degrees C), the capping/wiring molecules can be removed to produce controllable particle size and interparticle spatial morphology. The electrocatalytic activity of the activated nanostructures toward methanol oxidation, which is of fundamental importance to fuel cell catalysis, has been demonstrated. The novelty of the findings is the viability of a thermal activation strategy of core-shell nanostructured catalysts based on molecularly predefined interparticle spatial properties on a substrate, which upon further investigation may form the basis for spatially controllable nanostructured catalysts.     

Thermoanalytical investigations on kinetics and mechanism of deamination of tris(ethylenediamine)copper(II) sulphate

The thermal decomposition of tris(ethylenediamine)copper(II) sulphate has been studied using TG, DTG and DTA. The different stages of decomposition have been identified by these techniques in conjunction independent pyrolysis and X-ray diffraction. The kinetics and mechanism of the first two stages of deamination of the complex were evaluated. The activation parameters for the deamination reaction were computed from the TG and DTA curves using four integral methods. The two stages of deamination follow the mechanism of random nucleation with the formation of one nucleus on each particle (Mampel equation). The thermodynamic parameter namely heat of reaction (DH) for the two deamination processes was also evaluated.

---

Zusammenfassung Mittels TG, DTG und DTA wurde die thermische Zersetzung von Tris(ethylendiamin)-kupfer(II)-sulfat untersucht. Anhand dieser Methoden wurden in Verbindung mit einer gesonderten Pyrolyse und Röntgendiffraktion die einzelnen Schritte dieser Zersetzung identifiziert. Weiterhin wurde die Kinetik und der Mechanismus der beiden ersten Schritte der Desaminierung des Komplexes entwickelt. Unter Anwendung von vier Integralmethoden wurden aus den TG- und DTA-Kurven die Aktivierungsparameter der Desaminierungsreaktion berechnet. Beide Schritte der Desaminierung verlaufen nach dem Mechanismus der Random-Keimbildung mit der Bildung von einem Keim pro Partikel (Mampel-Gleichung). Die Reaktionswärme der zwei Desaminierungsprozesse wurde ebenfalls bestimmt.

---

---

The authors are grateful to the authorities of Vikram Sarabhai Space Centre for providing the instrumental facilities. The help of Dr. K. Krishnan and Mr. Viswanathan Asari in the TG/DTA instrumental work is gratefully appreciated. One of the authors (S.M.) acknowledges with gratitude the aid given to him by the Council of Scientific and Industrial Research (India) in the form of a senior research fellowship for carrying out this work.