Effect of the Nature of Crosslinking Agent on the Catalase‐Like Activity of Polystyrene‐Bound Glycine–Metal Complexes

Abstract

Catalase‐like activity of metal complexes of various crosslinked polystyrene‐supported glycines were carried out and correlated with the nature of crosslinking agent in the polymer support. Polystyrenes with 2 mol% divinyl benzene (DVB), ethylene glycol dimethacrylate (EGDMA), and 1,6‐hexanediol diacrylate (HDODA) crosslinking were used as polymer supports. Glycine functions were incorporated to the chloromethylpolystyrenes by polymer analogues reactions and complexed with Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) ions. The metal uptake varied in the order: Cu(II) > Cr(III) > Mn(II) > Co(II) > Fe(III) > Ni(II) > Zn(II), and extent of metal uptake by various crosslinked systems varied with the nature of crosslinking agent. The polymeric ligands and the metal complexes were characterized by various analytical techniques. The catalytic activities of these metal complexes were investigated towards the decomposition of hydrogen peroxide and was found to decrease in the order: Co(II) > Cu(II) > Ni(II) > Cr(III) > Fe(III) > Mn(II) > Zn(II). With increasing rigidity of the crosslinking agent the catalytic activity also decreased.     

Symposium on Biomedical Polymers

ABSTRACT

Glycine functions were incorporated into 2–20 mol% N,N′-methylene-bis-acrylamide (NNMBA)-crosslinked polyacrylamides by transamidation with excess sodium salt of glycine. Complexation characteristics of glycine functions in different structural environments were investigated towards Co(II), Ni(II), Cu(II) and Zn(II) ions. The observed trend in complexation was found to be: Cu(II) > Ni(II) > Co(II) > Zn(II). The polymeric ligands and metal complexes were characterized by various spectral techniques. The polymeric ligands could be recycled several times and the metal ion desorbed resins showed specificity to the desorbed metal ion than other metal ions. This originates from the development of certain ‘pockets’ left by the desorbed metal ion or the ‘memory’ of the polymeric ligands for the desorbed metal ion. This lightly crosslinked systems showed much faster rebinding kinetics. The conditions of metal ion binding and rebinding were optimized to exploit the specific and selective separation of metal ions using metal ion desorbed systems. The specificity and selectivity characteristics depend on the degree of NNMBA crosslinking.     

Spectroscopic and thermodynamic studies of complexation of some divalent metal ions with isatin-<Emphasis Type="Italic">β</Emphasis>-thiosemicarbazone

Metal complexes of some divalent metal ions (Co, Ni, Cu, Zn, Hg, and Pd) with isatin-β-thiosemicarbazone (ITS) as the Schiff base have been investigated potentiometrically and spectrophotometrically. The dissociation constants of the ligand and formation constants of the metal complexes, as well as the corresponding thermodynamic functions (ΔG, ΔH and ΔS) have been determined at different temperatures in ethanol—water solution. The full stability constants were also evaluated spectrophotometrically by the Job method. The experimental results indicate that Cu(II), Zn(II), Pd(II), and Hg(II) form one-to-one molecular complexes (ML) with the studied ligand, whereas Co(II) and Ni(II) form both ML and ML₂ species.     

EFFECT OF THE DEGREE OF DVB CROSSLINKING ON THE METAL ION SPECIFICITY OF POLYACRYLAMIDE-SUPPORTED GLYCINES

Metal ion specificity studies of divinylbenzene (DVB)-crosslinked polyacrylamide-supported glycines in different structural environments were investigated. The effect of the degree of crosslinking on the specific rebinding of the desorbed metal ion was investigated towards Co(II), Ni(II), Cu(II), and Zn(II) ions. The metal ion-desorbed resins showed specificity for the desorbed metal ion and the specificity characteristics increases with an increasing degree of the crosslinking agent. The polymeric ligands and metal complexes were characterized by IR, UV-visible and EPR spectra, and by SEM analysis. The swelling and solvation characteristics of the crosslinked polymers, polymeric ligands and metal complexes, the effect of the pH dependence on metal ion binding and rebinding and the kinetics of metal ion binding and rebinding were also followed. The complexation resulted in the downfield shift of the carboxylate peak in the IR spectra. The EPR parameters are in agreement with a distorted tetragonal geometry. The Cu(II) ion-desorbed resins selectively rebinds Cu(II) ions from a mixture of Cu(II) and Co(II) and Cu(II) and Ni(II) ions. The resin could be regenerated several times without loss of capacity and effective for the specific and selective rebinding of Cu(II) ions.     

Protonation Equilibria of Carminic Acid and Stability Constants of Its Complexes with Some Divalent Metal Ions in Aqueous Solution

The dissociation constants of carminic acid (7-D-glucopyronosyl-3,5,6,8-tetra- hydroxy-1-methyl-9,10-dioxo-anthracene-2-carboxylic acid) (CA), together with the stability constants of its Cu(II), Zn(II), Ni(II), Co(II) and Hg(II) complexes, were studied potentiometrically in aqueous medium at 25.0?(1)?°C, and at the ionic background of 0.1?mol?dm^?3 of NaCl, and determined with the SUPERQUAD computer program. It has been observed that carminic acid has five dissociation constants, and for H₅L their values are 3.39?(7), 5.78?(7), 8.35?(7), 10.27?(7), and 11.51?(7). This ligand behaves as a bi-dentate ligand, and the carboxyl and the ortho hydroxy groups of the ligand coordinate to the metal ions. Various metal complexes were produced in solution under the experimental conditions, for each metal ion used, including hydrolyzed species. The species distribution curves of the complexes formed in the solution were calculated and reviewed. The stability of the complexes was found to follow the order: Cu(II) > Zn(II) > Ni(II) > Co(II) > Hg(II).     

Influence of the Molecular Character and Degree of Crosslinking on the Interaction of Crosslinked Polyacrylamide-Supported Amines with Cu(Ii) Ions

Abstract

Amino groups were incorporated into polyacrylamides with 2?20 mol% of crosslinking agents by transamidation with ethylenediamine. Divinylbenzene, N,Nv′-methylene-bis-acrylamide, and tetraethyleneglycol diacrylate were used as the crosslinking agents. The complexation of these resins, which contain ligand functions in different macromolecular structural environments, was investigated with Cu(II) ions. The Cu(II) uptake of these different resins was correlated with the molecular character and degree of crosslinking in the polymer matrix. The time course and kinetics of complexation depend on the nature of the crosslinking agent in the polymer matrix. The swelling behavior of the uncomplexed and complexed resins, structural characteristics, and thermal decomposition behavior were followed by IR, EPR, and thermal analysis. The swelling characteristics of the complexed resins are lower than those of the uncomplexed resins. Complexation resulted in shifting of the IR absorptions. The EPR parameters depend on the nature of crosslinking and are in agreement with the distorted tetragonal geometry of the Cu(II) complexes. The thermal decomposition behavior also depends on the nature and the degree of crosslinking in the polymer matrix.     

Potentiometric Studies of Some Bivalent Metal Ion Complexes of a New Ligand,o-(2-Thiazolylazo)-4-Ethylphenol

Abstract

The complexations of a new ligand, o-(2-thiazolylazo)-4-ethylphenol(TAEP) with Ca(II), Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Hq(II) and Pb(II) have been studied by potentiometric titrations, at 25.0 ± 0.2°C and an ionic strength of 0.1 in 30% v/v dioxane-water mixture. The dissociation constant and spectral data of TAEP and formation constants of the complexes containing various molar ratios of metal ion to ligand, are reported. It is observed that Ca(II) forms only an ML complex in any molar ratios, whereas other metal ions react in two steps forming ML and ML₂ complexes in a 1:3 molar ratio. In the case of 1:1 and 1:2 molar ratios, Mn(II), Co(II), Cd(II) and Hg(II) seemed to form bi- or poly-nuclear complexes because of slightly different formation curves from those of 1:3 molar ratio. The sequence of the first successive formation constant is Cu > Hg > Ni > Pb > Co > Zn > Cd > Mn > Ca, showing Mellor-Maley's order. Further correlation is shown between the formation constants and the second ionization potentials of the metals.     

Capillary isotachophoretic determinations of metal ions by use of complexation equilibria in acetone-water medium

The determination of metal ions by capillary isotachophoresis and the complexation equilibria between metal ions and polyaminopolycarboxylic acids has been investigated. A seven-component mixture of metal ions can be separated in 45% v/v acetone-water medium when EDTA or DCTA is used as the terminating ion. Linear calibration graphs are obtained for a standard mixture of Mn(+), Cu(2+), Zn(2+), Cd(2+), Pb(2+) and Fe(3+) in the range 0.5-5.0 nmole, with relative standard deviations of 1.0% or better. The effective mobilities of the Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) complexes increase in parallel with the stability constants, except for the Cu(II) complexes. It is concluded that the abnormal behaviour of the Cu(II) complexes may be attributed to a difference in steric configuration.     

Thermal properties of some complexes of quinolinic acid with divalent metal ions

Studies of the complexes of pyridinecarboxylic acids with divalent metal ions as a function of the position of the carboxyl groups were extended. The thermal properties of the complexes of quinoline acid (pyridine-2,3-dicarboxylic acid) with several divalent metal ions were determined by thermogravimetry (TG) and differential thermal analysis (DTA). A correlation between these compounds and others obtained by reaction between the studied metal ions with similar acids (lutidinic acid (pyridine-2,4-dicarboxylic acid) and isocinchomeronic acid (pyridine-2,5-di-carboxylic acid) is discussed in terms of the position of the carboxyl group far from the aza group. The thermal stability of the metal complexes is in the order Mn(II) > Fe(II) > Zn(II) ? Co(II) > Ni(II) > Cu(II).     

Thermal analysis of cobalt(II), nickel(II), copper(II) and zinc(II) bis (3,5-dimethyl-1-pyrazolyl)dihydroborates

Complexes of general formula M[H₂B(Me₂pz)₂]₂, [where M = Co(II), Ni(II), Cu(II), and Zn(II)] are characterized by thermal analysis and complementary techniques. Mixtures of boron and metal oxides are found as final residues. Relative thermal stability (Ni > Cu > Co = Zn) and thermal behaviour are discussed. Melting and sublimation data are compared with those referred to in the literature.     

A thermoanalytical study of dipicolinic acid acting as a terdentate ligand in coordination compounds of divalent metal ions

The coordination compounds obtained by reaction of hot solutions of dipicolinic acid with the carbonates of the divalent metal ions manganese(II), iron(II), cobalt(II), nickel(II), copper(II) and zinc(II) are studied using TG, DSC and HTRS techniques. For the thermal stability a sequence Mn > Fe > Zn > Co > Ni > Cu may be observed. This series is compared with the similar series obtained with isocinchomeronic acid. The thermal stability is, for each metal of the series, isocinchomeronic > dipicolinic. Thermal stability is discussed in terms of the intermolecular bonds, of the structures and of the stability constants of the complexes examined.     

Transition Metal Complexes of an Antipyrine Derivative

The stepwise formation constants of N-antipyrinyl-N′-3-phenyl-2-propenoyl-thiourea (I) complexes with metal ions of the first transition series, Cu(II), Ni(II), Co(II), Mn(II) and Zn(II) have been determined in 70% (V/V) ethanol-water medium. The formation constants for the chelates follow the Irving-Williams series: Zn(II)<Cu(II)>Ni(II)>Co(II)>Mn(II) The effect of ionic radius and electronegativity on the chelate formation are discussed. Complexes of Cu(II) and Ni(II) have been synthesised and characterised by elemental analysis, electrolytic conductance, IR spectra and magnetic susceptibility measurements. The ligand forms bis-complexes with Cu(II) and Ni(II). The binding sites are oxygen and sulphur atoms.     

Metalloantibiotics: synthesis and antibacterial activity of cefepime metal complexes

Cefepime interacts with transition metal(II) ions to give [M(cefepime)Cl₂] complexes (M = Mn(II), Co(II), Ni(II), Cu(II), and Zn(II)) which were characterized by physicochemical and spectroscopic methods. The complexes are insoluble in water and common organic solvents, and probably have polymeric structures. The spectra indicated that the ligand is a multidentate chelating agent. The complexes have been screened for antibacterial activity against several bacteria and showed activity less than that of free cefepime.     

Selective Electrochemical Analysis of Various Metal Ions at an EDTA Bonded Conducting Polymer Modified Electrode

An EDTA‐bonded conducting polymer modified electrode was prepared and characterized by FT‐IR. The modified electrode was used for the selective electrochemical analysis of various trace metal ions such as, Cu(II), Hg(II), Pb(II), Co(II), Ni(II), Fe(II), Cd(II), and Zn(II) at the different pHs by linear sweep and square wave voltammetry. Dynamic ranges were obtained using square wave voltammetry from 0.1 μM to 10.0 μM for Co(II), Ni(II), Cd(II), Fe(II), and Zn(II) and 0.5 nM to 20 nM for Cu(II), Hg(II), and Pb(II) after 10 min of preconcentration. The detection limits were determined to be 0.1 nM, 0.3 nM, 0.4 nM, 50.0 nM, 60.0 nM, 65.0 nM, 80.0 nM, and 90.0 nM for Cu(II), Hg(II), Pb(II), Co(II), Ni(II), Cd(II), Fe(II), and Zn(II), respectively. The technique offers an excellent way for the selective trace determination of various heavy metal ions in a solution.     

Preparation,IR Characterization and Thermal Properties of Some Metal Complexes of Isatin-3-oxime

The synthesis and characterization of Co(II), Ni(II), Cu(II), Zn(II), Ag(I), Cd(II) and Hg(II) complexes of isatin-3-oxime (H₂OXI) are reported. Elemental analysis, infrared spectroscopy, thermal analysis and X-ray powder diffraction were used to characterize the complexes. The IR spectral data show that the ligand behaves in a monodentate or a bidentate manner in the different complexes. The compositions of the prepared complexes were Ag(HOXI), Hg(OXI) and M(HOXI)₂ for M=Co(II), Ni(II), Cu(II), Zn(II) and Cd(II).This revised version was published online in November 2005 with corrections to the Cover Date.     

Silica-modified magnetic nanoparticles functionalized with cetylpyridinium bromide for the preconcentration of metals after complexation with 8-hydroxyquinoline

Magnetically driven separation technology has received considerable attention in recent decade for its great potential application. In this study, we investigate the application of silica-modified magnetite nanoparticles (NPs) coated with a cationic surfactant as adsorbent for microextraction and determination of trace amounts of Cu(II), Ni(II), Co(II), Cd(II), Pb(II) and Mn(II) from environmental water samples. The synthesized silica-coated NPs in combination with cetylpyridinium bromide have the ability to adsolubilize the metal ions after complexation with 8-hydroxyquinoline. The NPs bearing the target metals are easily separated from the aqueous solution by applying an external magnetic field and the complexed metals were desorbed using acidic methanol. The desorbed analytes are introduced into the graphite furnace of an atomic absorption spectrometer. The effect of pH, complexing agent, amount of cetylpyridinium bromide, microextraction time, desorption conditions, ionic strength on extraction efficiency of the metal ions are investigated and optimized. Under the optimized conditions, the detection limits for Cu(II), Ni(II), Co(II), Cd(II), Pb(II) and Mn(II) are 4.7, 9.1, 9.5, 2.3, 7.4 and 15.3 ng L⁻¹, respectively and the relative standard deviations (n = 6) are less than 3.6%. The accuracy of the method was evaluated by recovery measurements on the spiked samples and good recoveries (93-113%) with low RSDs were achieved.     

Phenoxo-bridged symmetrical homobinuclear complexes derived from an “end-off” compartmental ligand, 2,6- bis [5′-chloro-3′-phenyl- 1H -indole-2′-carboxamidyliminomethyl]-4-methylphenol

A compartment ligand 2,6-bis[5′-chloro-3′-phenyl-1H-indole-2′-carboxamidyliminomethyl]-4-methylphenol was prepared and homobinuclear phenol-bridged Cu(II), Ni(II), Co(II), Zn(II), Cd(II), Hg(II), Fe(III), and Mn(II) complexes have been prepared by the template method using the precursors 2,6-diformyl-4-methylphenol, 5-chloro-3-phenylindole-2-carbohydrazide and metal chlorides in 1 : 2 : 2 ratio, respectively. The complexes were characterized by elemental analyses, conductivity measurements, magnetic susceptibility data, IR, NMR, FAB mass and ESR spectra, TGA, and powder XRD data. Cu(II), Co(II), Zn(II), Cd(II) and Hg(II) complexes exhibit square pyramidal geometry whereas Ni(II), Mn(II), and Fe(III) complexes are octahedral. Low magnetic moment values for Cu(II), Ni(II), Co(II), Fe(III), and Mn(II) complexes show antiferromagnetic spin-exchange interaction between two metal centers in binuclear complexes. The ligand and its complexes were tested for antibacterial activity against Escherichia coli and Staphyloccocus aureus, and antifungal activity against Aspergillus niger and Candida albicans.     

Thermal degradation of partly complexed poly(vinylpyridines) with transition metal chloride

The thermal degradation of poly(vinylpyridines), partly complexed with transition metal chlorides containing Co(II), Ni(II), Cu(II) and Zn(II) ions, was investigated using thermogravimetry, infrared spectrometry and gc/mass spectrometry. When poly(2-vinylpyridine) and poly(4-vinylpyridine) were partly complexed with transition metal ions, thermal degradation was initiated at low temperature. The complexes were decomposed even near the threshold temperature for weight loss. Degradations were modified by the complexation, particularly for poly(2-vinylpyridine). Yields of dimers, ethylpyridine, etc., increased linearly with degree of complexation, but that of monomer decreased linearly. The increase of the yield of dimer could be explained from the concept that polymer radicals reacted with metal chlorides, then dehydrochlorinated and underwent β-scission.     

Complexes of cobalt(II), nickel(II) and copper(II) with the benzenedicarboxylic acids. Thermal properties

The thermal properties of the complexes of phthalic, isophthalic and terephthalic acid with cobalt(II), nickel(II) and copper(II) are determined by thermogravimetry (TG), differential thermogravimetry (DTG) and differential scanning calorimetry (DSC).The thermal stability of the anhydrous compounds gives, for the metal ions, a sequence Co > Ni > Cu.The thermal stability series as a function of the ligand for each metal is terephthalate > isophthalate > phthalate.     

Study on metal complexes of chelating resins bearing iminodiacetate groups

Cu(II), Co(II) and Ni(II) complexes of chelating resins (CR) bearing iminodiacetate (IDA) ligands were prepared. The CR-metal complexes were characterized by FT-IR spectroscopy, X-ray diffraction (XRD), thermal behavior (TG and DTG) under nitrogen atmosphere, and electron paramagnetic resonance (EPR). FT-IR spectra of the CR-metal complexes showed the characteristic bands of CR were still present but red-shifted after the metal complexation, and new bands assigned to Me-N bonds were observed. Thermal behavior of the metal-CR complexes supported the metal complexation, metal complexation leading to the decrease of the thermal stability of the CR, the lowest thermal stability being found when the highest amount of Cu(II) was loaded. Based on the EPR results and the thermal behavior of Cu(II)-CR complexes, the scheme for the complexation of Cu(II) on the CR was suggested.