两个基于2,5-二甲氧基对苯二甲酸和咪唑衍生物的超分子钴配位聚合物的结构及光催化反应

本文以咪唑衍生物为配体,通过水热合成法与钴离子制备出两个配位聚合物:{[Co(DTA)(1,4-DIB)(H₂O)]·H₂O}_n(1)和[Co(DTA)(1,3-BMIB)]_n(2)(1,4-DIB=1,4-二(1H-咪唑-1-基)苯; 1,3-BMIB=1,3-二(4-甲基-1H-咪唑-1-基)苯;H₂DTA=2,5-二甲氧基对苯二甲酸)。利用X射线单晶衍射、粉末衍射、热失重、元素分析、红外光谱以及固体紫外-可见光谱等对两个配合物进行了表征。结构分析证实配合物1和2是通过二维结构堆积成的三维超分子化合物。粉末衍射测试则显示两个配合物在水中有很好的稳定性。固体紫外-可见光谱显示两个配合物属半导体材料,对紫外-可见光有很强的吸收作用。在光催化实验中,配合物1和2可加快亚甲基蓝的降解速度。     

疏水缔合悬浮稳定剂的合成及其对固井水泥浆稠度和悬浮稳定性的影响

针对大温差条件下固井水泥浆在固井过程中可能存在的悬浮失稳问题，本研究采用水溶液自由基聚合法来合成具有疏水缔合结构的聚合物作为悬浮稳定剂(PAAN)。通过红外光谱仪、凝胶渗透色谱仪、热重分析仪、高温流变仪、SEM、紫外分光光度计等表征PAAN的结构，发现PAAN随温度升高，形成分子间疏水缔合网状结构，保证了体系的粘度，从而起到有效的悬浮稳定作用。研究发现在40~110 ℃下，0.6%加量的PAAN可以保证固化后的水泥石柱顶部和底部密度差<0.01 g/cm³，且水泥浆稠化时间基本不变，表明PAAN可以保证水泥浆体系具有良好的悬浮稳定效果，且对水泥浆的其他性能无不良影响。     

MCNOs/CdS双效光催化剂的制备及其性能研究

水热合成法制备了不同磁性纳米洋葱碳(MCNOs)负载量(0%、1%、3%、5%)的MCNOs/CdS光催化剂。并通过X射线衍射分析(XRD)、扫描电子显微镜(SEM)、傅里叶红外光谱(FT-IR)、X射线光电子能谱(XPS)、紫外可见光光谱(UV-Vis)、磁滞回线测定仪(VSM)对其进行表征,探究了MCNOs负载比例对催化剂在可见光下降解RhB性能及机理的影响。结果表明,MCNOs能有效提高CdS的光催化效果,复合3%MCNOs后降解率为96%,与纯CdS相比降解率提高了30%,磁性分析表明,其具有良好的顺磁性并能实现催化剂的有效回收。MCNOs/CdS在可见光下催化降解RhB的一级反应动力学直线有较好的拟合度,表明制备的催化剂有较好的催化活性。     

基于冲击光谱测量的氧化铝晶体高压相变诊断技术

氧化铝晶体是一种优良的光学透明窗口材料,更是地球内部的重要组成物质.利用气炮加载结合冲击光谱测量,不仅能够获得其发光特征,并且根据光谱分布特征得到高压结构相变信息.在自主搭建的冲击光谱动态测试平台上,结合多通道辐射高温计以及ICCD瞬态光谱测试技术在40~120 GPa的压力区间,研究了c切向氧化铝晶体的辐射发光效应.在可见光波段400~700 nm区间获得了氧化铝晶体的发光光谱和辐射温度结果,证实了光谱的结构特征和表观温度值与该压力下氧化铝的结构相变存在明显的关联性.     

Bi-2223/Ag异质结的光生电压效应研究

在50 ～ 340 K不同温度下,利用紫色激光(λ=405 nm)对银/铋锶钙铜氧2223异质结界面进行辐照,观测到明显的光生电压效应,发现光生电压的极性分别在超导转变温度TC与320 K附近发生了反转,排除了激光产生的热电势是产生光生电压的原因,分析表明银/铋锶钙铜氧2223异质结界面处存在内建电场:光生电压由异质结界面处的内建电场分离光生电子-空穴对产生的.超导转变温度TC之下以及320 K以上,内建电场方向从超导体指向金属电极;超导转变温度TC与反向温度320 K之间,内建电场从金属指向超导体.     

Numerical simulation and structure optimization of a liquid–vapor separation plate condenser

Journal of Thermal Analysis and Calorimetry - Based on innovative design, a liquid–vapor separation plate condenser with excellent heat transfer performance is invented. It takes less time to...     

A post curing strategy toward the feasible covalent adaptable networks in polyacrylate latex films

The implementation of covalent adaptable networks (CANs) in general resin system is becoming attractive. In this work, we propose a simple post-curing strategy based on the core-shell structured acrylate latex for the achievement on both the improved general performance and the CANs characteristics in latex films. The building to the CANs was relied on the introduction of 4,4′-diaminophenyl disulfide as the curing agent, which cured the acetoacetoxy decorated shell polymer through the ketoamine reaction. The metathesis reaction of aromatic disulfides in the crosslinking segments enabled the thermally induced dynamic behavior of the network as revealed in the stress relaxation tests by comparison with other diamine crosslinking agents without the incorporation of disulfide. The synergism of the dynamic crosslinking of the shell polymer and static crosslinking in the core polymer contributed to the improved mechanical strength (15 MPa, strain% = 250%) and the suppressed water adsorption (~1% in 24 h of soaking) of the latex film, which exhibited above 90% of recovery in both strength and strain from a cut-off film damage within 1 h at 80°C. Moreover, the cured latex film could be recycled, and 75% of the mechanical performance was regained after three fragmentation-hot-pressing cycles. These, in addition with the feasible and environmental friendly characteristics, suggest a sustainable paradigm toward the smart thermosetting latex polymers.     

Terahertz radiation from pentacene organic diode at room temperature

We investigate terahertz radiation(T-rays) from a pentacene organic diode at room temperature. The quantum chemistry calculation for frequency-related Huang–Rhys factor of pentacene is also carried out. The results demonstrate that the T-rays can come from a bending vibration of pentacene skeleton after the energy of pentacene exciton transferring to the vibrational excited state via electron–phonon coupling. Frequency and natural bond orbital analytics of pentacene and its derivatives are performed in order to explain the result and develop new materials to get higher emission. This work provides a new way to produce T-rays with a simple device at room temperature.