Finite element computations of two-dimensional arterial flow in the presence of a transverse magnetic field

A finite element solution of the Navier-Stokes equations for steady flow under the magnetic effect through a double-branched two-dimensional section of a three-dimensional model of the canine aorta is discussed. The numerical scheme involves transforming the physical co-ordinates to a curvilinear boundary-fitted co-ordinate system. The shear stress at the wall is calculated for a Reynolds number of 1000 with the branch-to-main aortic flow rate ratio as a parameter. The results are compared with earlier works involving experimental data and found to be in reasonable qualitative agreement. The steady flow, shear stress and branch flow under the effect of a magnetic field have been discussed in detail.     

Novel solid-phase extraction and preconcentration technique coupled with ICP-AES for the determination of Cr(III), Ni(II), and Zn(II) in various water samples

Newly synthesized 2-propylpiperidine-1-carbodithioate (2-PPC) was used for the extraction of Cr(III), Ni(II), and Zn(II) from various water samples. In the present investigation, the use of a syringe loaded with sorbent for the separation and enrichment of Cr(III), Ni(II), and Zn(II) prior to their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) was proposed to substitute the batch and column techniques. The described method was compared with the column technique with respect to fastness, simplicity, recovery, and risk of contamination. The syringe was loaded with 1.0 g of sorbent in order to retain the analyte elements. Next, 7.0 mL of sample solution (pH 5.0 ± 0.2) was drawn into the syringe in 15 s and discharged over 15 s. Then, an eluent (3.0 M HCl) was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cr(III), Ni(II), and Zn(II) were in the range of 94.50 to 99.62% with a standard deviation (S.D.) of 0.03%. The elements could be concentrated by drawing and discharging several portions of sample successively and eluting only one time. The detailed study of various interferences proved the method to be highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied to the determination of Cr(III), Ni(II), and Zn(II) in spiked and natural water samples. The results obtained are in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Three-dimensional mesoporous titanosilicates prepared by modified sol-gel method: Ideal gold catalyst supports for enhanced propene epoxidation

Mesoporous titanosilicates with 1-12 mol % Ti content and with three-dimensional wormhole-like mesoporosity are prepared by a modified sol-gel technique. Sorption analysis shows that there is little change in the surface properties with increasing Ti concentration in the samples, implying that Ti atoms either are well-dispersed on the walls of the silica matrix or are present inside the framework with no pore blocking effect. Spectroscopic analysis shows that the Ti atoms are atomically dispersed in the silica matrix even at very high Ti concentration and there is no observable Ti aggregate (anatase) present in the samples. These titanosilicate samples after Au deposition followed by trimethylsilylation (for enhanced hydrophobicity) are highly efficient catalysts for vapor-phase propene epoxidation using O2 and H2. It was possible to achieve commercially desirable performance with about 7% propene conversion, >90% propene oxide selectivity, and about 40% hydrogen efficiency.     

Underpotential deposition studies of copper on glassy carbon

Studies on the deposition and dissolution of copper from 0·5 M sulphuric acid solutions onto glassy carbon (GC) using potential sweep techniques indicated that an additional peak occurs at higher positive potentials than the bulk stripping peak. This peak is identified as due to the stripping of underpotential deposited (UPD) copper. Results of investigations on the effect of sweep rate, deposition potential and time of deposition on the peak characteristics of UPD and bulk deposited copper are also reported.     

Identifying reactive intermediates by mass spectrometry

Development of new reactions requires finding and understanding of novel reaction pathways. In challenging reactions such as C–H activations, these pathways often involve highly reactive intermediates which are the key to our understanding, but difficult to study. Mass spectrometry has a unique sensitivity for detecting low abundant charged species; therefore it is increasingly used for detection of such intermediates in metal catalysed- and organometallic reactions. This perspective shows recent developments in the field of mass spectrometric research of reaction mechanisms with a special focus on going beyond mass-detection. Chapters discuss the advantages of collision-induced dissociation, ion mobility and ion spectroscopy for characterization of structures of the detected intermediates. In addition, we discuss the relationship between the condensed phase chemistry and mass spectrometric detection of species from solution.

Modern approaches of mass spectrometry can identify reaction intermediates and provide a unique insight into their structure, properties and kinetics.     

The Synthesis and Bioactivity of Dimethyl (2,3- Dihydrobenzo[b][1,4]Dioxin-6-Yl)(Aryl Amino)Methylphosphonates

Abstract

A new series of α-aminophosphonates have been synthesized by a one-pot three-component reaction of 2,3-dihydrobenzo[b][1,4]dioxine-6-carbaldehyde, various amines, and dimethyl phosphite by using nano-TiO₂ as a catalyst under solvent-free conditions at 50°C. The major advantages of the present method are high yields, short reaction times, recyclable catalyst, and solvent-free reaction conditions. Among these new structurally diversified set of α-aminophosphonates, dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(3-nitrophenylamino) methylphosphonate and dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(4-fluoro-3-nitro-phenyl-amino) methylphosphonate have shown higher antioxidant activity in diphenyl picryl hydrazyl (DPPH) scavenging, reducing power assay, and lipid peroxidation methods.     

Synthesis and Bioassay of Ethyl-2- (2-((Diethoxyphosphoryl) (Aryl) Methylamino)Thiazol-4-Yl)-2-(Methoxyimino)Acetates

Abstract

A simple, efficient, and environmentally benign methodology has been accomplished for the synthesis of α-aminophosphonates by one-pot three-component reaction of ethyl-2-amino-α-(methoxy-imino)-4-thiazoleacetate, aldehydes, and diethylphosphite by using Amberlyst-15 as catalyst at room temperature under solvent-free conditions. Their chemical structures were characterized by infrared (IR), NMR (¹H, ¹³C & ³¹P), mass spectral, and elemental analysis. All the title compounds were screened for radical-scavenging activity by 1,1-diphenyl-2-picrylhydrazyl (DPPH), nitic oxide (NO), and hydrogen peroxide (H₂O₂) methods.

Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental files: Additional text and figures.