Resolving the copper interference effect on the stripping chronopotentiometric response of lead(II) obtained at bismuth film screen-printed electrode

As copper(II) is a common ion in a variety of analytical samples, its effect on the stripping response of lead(II) at bismuth film screen-printed carbon electrode (BFSPCE) was investigated. The study was conducted using a screen-printed three-electrode system (working, counter and reference electrodes), with the carbon-working electrode plated in situ with bismuth film. Copper present at significant concentration level in samples was found to affect the sensitivity of the electrode by reducing the constant current stripping chronopotentiometric (CCSCP) response of lead(II). Recovery of the lead stripping response at the BFSPCE in the presence of copper was obtained when 0.1 mM ferricyanide was added to the test solution. The ferricyanide added circumvents the detrimental effect of copper(II) by selectively masking the copper ions by forming a complex. The analytical utility of the procedure is illustrated by the stripping chronopotentiometric determinations of lead(II) in soil extracts.     

Condensation of ethyl phenylpropiolate with some cyanoacetyl and cyanomethylene heterocycles

N-Cyanoacetyl pyrrolidine, piperidine and morpholine reacted with ethyl phenylpropiolate to give the rearranged Michael addition products III. Some interesting results obtained from the bromination, hydrolysis and reduction of III are reported. 2-Thiophene and 2-furaneaceto-nitriles reacted with ethyl phenylpropiolate to give the Claisen addition products XVIII. Reaction of either III or XVIII with hydrazine hydrate, phenylhydrazine and hydroxylamine hydrochloride afforded 3-phenylpyrazol-5-one, 1,3-diphenylpyrazol-5-one and 3-phenylisoxazol-5-one together with the appropriate starting cyanoacetyl or cyanomethylene compounds, respectively. The mechanism for the formation of the various reaction products beside the ir and nmr spectral results are discussed.     

Chemical characterisation of bioactive compounds in Medicago sativa growing in the desert of Oman

Medicago sativa Linn growing in Omani desert were chemically characterised using flame photometry, inductively coupled plasma, gas chromatography–mass spectrometry and high performance liquid chromatographic (HPLC) analysis. HPLC analyses were performed to determine the phenolics and flavonoids present in M. sativa. The major compounds detected in M. sativa leaves were protchaechenic acid (3.22%), hydroxyl benzoic acid (1.05%), β-Phenyl caffate (0.97%) and kaempherol (0.89%). Pterostilbene, a cholesterol-lowering compound, was detected in M. sativa.     

Stripping chronopotentiometric detection of copper using screen-printed three-electrode system—application to acetic-acid bioavailable fraction from soil samples

Single-use sensors, incorporating a three-electrode configuration (graphite carbon-working electrode; carbon-counter electrode and silver/silver chloride-reference electrode), have been fabricated on a polyester substrate using low cost screen-printing (thick-film) technology. These electrodes coupled with constant current stripping chronopotentiometry (CCSCP), has provided a convenient screening tool for on-site detection of trace levels of copper. Modification of the graphite carbon surface based on in situ deposition of mercury film has been carried out. By appropriate choice of supporting medium and applied constant stripping current, well-resolved and reproducible response for copper was obtained. The stripping response for copper following 2 min deposition was linear over the concentration range examined (10-2000 ppb) with detection limit of 6 ppb using 2 M hydrochloric acid (HCl). Successful applications of the sensing device to acetic-acid bioavailable fraction of a certified reference material (CRM 601, a lake sediment) and soil samples are demonstrated.     

Development and characterisation of disposable gold electrodes, and their use for lead(II) analysis

There is an increasing need to assess the harmful effects of heavy-metal-ion pollution on the environment. The ability to detect and measure toxic contaminants on site using simple, cost effective, and field-portable sensors is an important aspect of environmental protection and facilitating rapid decision making. A screen-printed gold sensor in a three-electrode configuration has been developed for analysis of lead(II) by square-wave stripping voltammetry (SWSV). The working electrode was fabricated with gold ink deposited by use of thick-film technology. Conditions affecting the lead stripping response were characterised and optimized. Experimental data indicated that chloride ions are important in lead deposition and subsequent analysis with this type of sensor. A linear concentration range of 10–50 μg L⁻¹ and 25–300 μg L⁻¹ with detection limits of 2 μg L⁻¹ and 5.8 μg L⁻¹ were obtained for lead(II) for measurement times of four and two minutes, respectively. The electrodes can be reused up to 20 times after cleaning with 0.5 mol L⁻¹ sulfuric acid. Interference of other metals with the response to lead were also examined to optimize the sensor response for analysis of environmental samples. The analytical utility of the sensor was demonstrated by applying the system to a variety of wastewater and soil sample extracts from polluted sites. The results are sufficient evidence of the feasibility of using these screen-printed gold electrodes for the determination of lead(II) in wastewater and soil extracts. For comparison purposes a mercury-film electrode and ICP–MS were used for validation.     

Development of surface chemistry for surface plasmon resonance based sensors for the detection of proteins and DNA molecules

The immobilisation of biological recognition elements onto a sensor chip surface is a crucial step for the construction of biosensors. While some of the optical biosensors utilise silicon dioxide as the sensor surface, most of the biosensor surfaces are coated with metals for transduction of the signal. Biological recognition elements such as proteins can be adsorbed spontaneously on metal or silicon dioxide substrates but this may denature the molecule and can result in either activity reduction or loss. Self assembled monolayers (SAMs) provide an effective method to protect the biological recognition elements from the sensor surface, thereby providing ligand immobilisation that enables the repeated binding and regeneration cycles to be performed without losing the immobilised ligand, as well as additionally helping to minimise non-specific adsorption. Therefore, in this study different surface chemistries were constructed on SPR sensor chips to investigate protein and DNA immobilisation on Au surfaces. A cysteamine surface and 1%, 10% and 100% mercaptoundecanoic acid (MUDA) coatings with or without dendrimer modification were utilised to construct the various sensor surfaces used in this investigation. A higher response was obtained for NeutrAvidin immobilisation on dendrimer modified surfaces compared to MUDA and cysteamine layers, however, protein or DNA capture responses on the immobilised NeutrAvidin did not show a similar higher response when dendrimer modified surfaces were used.     

Development of cysteine-modified screen-printed electrode for the chronopotentiometric stripping analysis of cadmium(II) in wastewater and soil extracts

Screen-printed carbon electrodes were fabricated with amino acid functionality by using in situ co-deposition of mercury and cysteine. The three-electrode configuration (graphite carbon working electrode, carbon counter electrode and silver/silver chloride reference electrode) incorporating a cysteine-modified working electrode exhibited good sensitivity towards cadmium(II). Several experimental variables affecting the sensor stripping response were characterised and optimised. These include cysteine and mercury concentrations, deposition time, deposition potential and stripping current. Surface analysis was also conducted using scanning electron microscopy (SEM) in order to characterize the electrode surface during cadmium analysis. The stripping chronopotentiometric response for cadmium(II) was linear in the concentration range 0.4–800 g L^–1 when a deposition time of 2 min was used. A detection limit of 0.4 g L^–1 was obtained using 0.025 M Tris–HCl buffer containing 0.1 M KCl (pH 7.4) as the supporting electrolyte. The analytical utility of the cysteine-modified sensor was demonstrated by applying it to cadmium analysis in various wastewater and soil samples collected from a contaminated site and extracted using acetic acid. The results obtained using the developed electrodes agreed satisfactorily with the values achieved using atomic absorption spectrometry and inductively coupled plasma mass spectrometry analysis. These results demonstrate the feasibility of using this type of sensor for cadmium analysis.     

Stripping chronopotentiometric measurements of lead(II) and cadmium(II) in soils extracts and wastewaters using a bismuth film screen-printed electrode assembly

The key to remediative processes is the ability to measure toxic contaminants on-site using simple and cheap sensing devices, which are field-portable and can facilitate more rapid decision-making. A three-electrode configuration system has been fabricated using low-cost screen-printing (thick-film) technology and this coupled with a portable electrochemical instrument has provided a a relatively inexpensive on-site detector for trace levels of toxic metals. The carbon surface of the screen-printed working electrode is used as a substrate for in situ deposition of a metallic film of bismuth, which allows the electrochemical preconcentration of metal ions. Lead and cadmium were simultaneously detected using stripping chronopotentiometry at the bismuth film electrode. Detection limits of 8 and 10 ppb were obtained for cadmium(II) and lead(II), respectively, for a deposition time of 120 s. The developed method was applied to the determination of lead and cadmium in soils extracts and wastewaters obtained from polluted sites. For comparison purposes, a mercury film electrode and ICP-MS were also used for validation.     

Regio‐ and Stereoselective Biomimetic Synthesis of Oligostilbenoid Dimers from Resveratrol Analogues: Influence of the Solvent,Oxidant, and Substitution

Oligostilbenoids are polyphenols that are widely distributed in nature with multifaceted biological activities. To achieve biomimetic synthesis of unnatural derivatives, we subjected three resveratrol analogues to oligomerization by means of one‐electron oxidants. Upon varying the metal oxidant (AgOAc, CuBr₂, FeCl₃ ? 6 H₂O, FeCl₃ ? 6 H₂O/NaI, PbO₂, VOF₃), the solvent (over the whole range of polarities), and the oxygenated substitution pattern of the starting material, stilbenoid oligomers with totally different carbon skeletons were obtained. Here we propose to explain the determinism of the type of skeleton produced with the aid of hard and soft acid/base concepts in conjunction with the solvating properties of the solvents and the preferred alignment by the effect of π stacking.