Effect of phosphorus (P) on the structure and reactivity of biochars produced from the pyrolysis of acid-washed biomass loaded with P of various forms

This paper investigates the effect of phosphorus (P) on char structure and reactivity of char prepared from the fast pyrolysis of purposely-prepared P-loaded biomass samples at 1000 °C in absence of other inorganic species. Biomass was first acid-washed then loaded with P of three different occurrence forms (one organic P i.e. phytic acid, and two inorganic P i.e. orthophosphoric acid and polyphosphoric acid) at the same P content of 0.8 wt%. Experimental results show that both organic and inorganic P substantially increase char yields during pyrolysis from 6.2% for the biomass sample without P to 23.0–26.0% for P-loaded samples due to the enhanced crosslinking by P-containing structures in char, leading to increases in the char C and H contents and decrease in O content. The presence of P in biochars from fast pyrolysis of various P-loaded biomass samples plays important role in the evolution of char structure and intrinsic reactivity measured during low-temperature oxidation at 500 °C in air under chemical-reaction-controlled regime. After pyrolysis and subsequent char oxidation, all P in biomass either as organic or inorganic P are found to be present in forms of acid-insoluble organic structures. For char prepared from acid-washed wood, char reactivity increases with char conversion due to the increasing pore surface area at higher conversion. Comparatively, for char prepared from acid-washed wood loaded with various P at char conversion below 60%, the presence of P increases char intrinsic reactivity due to the enhanced crosslinking of reactive carbon structures and reduced condensation of char structures. However, at conversions above 60%, P-containing species in char lead to a significant decrease in char reactivity, due to the formation of abundant CO-P bonds, that is highly resistant to the oxidation in air, in the reacting chars.     

Adaptive controller design for a switched model of air-breathing hypersonic vehicles

Since most of the control strategies for air-breathing hypersonic vehicles (AHVs) concentrate on the control-oriented models built at/around a specific working point, it is somewhat hard to extend them to the broader flight envelop. Aiming at the above deficiency, this paper formulates the dynamics of AHVs as several sub-models, which switch to each other in accordance with the flight condition and make up of the control-oriented switched model (COSM). With the aid of the COSM, two adaptive tracking controllers are proposed for the purposes of velocity tracking and altitude tracking, sequentially. By utilizing neural networks and designing robust control laws, the possible changes on the force and moment coefficients in the COSM are successfully handled. The time-varying inertia parameters of AHVs are also considered at design level. It is worth emphasizing that while this strategy is developed based on a switched model, the resulting control algorithm is continuous with no connection to the switching signal. Analysis indicates that both velocity and altitude tracking errors remain small within the whole flight envelop, which is further confirmed by a simulation study.     

The Role of Polarization in Photocatalysis

Semiconductor photocatalysis as a desirable technology shows great potential in environmental remediation and renewable energy generation, but its efficiency is severely restricted by the rapid recombination of charge carriers in the bulk phase and on the surface of photocatalysts. Polarization has emerged as one of the most effective strategies for addressing the above‐mentioned issues, thus effectively promoting photocatalysis. This review summarizes the recent advances on improvements of photocatalytic activity by polarization‐promoted bulk and surface charge separation. Highlighted is the recent progress in charge separation advanced by different types of polarization, such as macroscopic polarization, piezoelectric polarization, ferroelectric polarization, and surface polarization, and the related mechanisms. Finally, the strategies and challenges for polarization enhancement to further enhance charge separation and photocatalysis are discussed.     

Time-dependent Ginzburg–Landau equations for multi-gap superconductors

We numerically solve the time-dependent Ginzburg–Landau equations for two-gap superconductors using the finite-element technique. The real-time simulation shows that at low magnetic field, the vortices in small-size samples tend to form clusters or other disorder structures. When the sample size is large, stripes appear in the pattern. These results are in good agreement with the previous experimental observations of the intriguing anomalous vortex pattern, providing a reliable theoretical basis for the future applications of multi-gap superconductors.     

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束，在使用的振动环境中，会因弯曲应力而导致破裂，影响到飞行安全．本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究．首先在对8 mm、12 mm 无缺陷导管和含U 型缺口8 mm 导管的疲劳试验和有限元分析的基础上，得到了导管的最大拉应变-裂纹萌生寿命数据．然后采用基于强度极限和弹性模量估算法的Manson-Coffin 公式来预测导管裂纹萌生寿命．最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数，使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度．     

基于饱依丁-汤姆逊模型的软岩损伤蠕变模型

为更加准确地描述深部软岩的蠕变全过程,以饱依丁-汤姆逊模型为基础,将损伤变量引入到蠕变方程中,并构造了可描述加速蠕变阶段的模型元件,通过串联得到了新的蠕变模型。结果表明:该模型能够较好地描述软岩的衰减蠕变、稳态蠕变、加速蠕变阶段。用该模型对泥质页岩的蠕变试验结果进行数据拟合对比,结果显示该模型的拟合曲线与实验曲线基本吻合,拟合度为0.99733,能够很好地反映出软岩蠕变的特性,适合用于描述深部软岩的蠕变行为。     

A [001]-Oriented Hittorf's Phosphorus Nanorods/Polymeric Carbon Nitride Heterostructure for Boosting Wide-Spectrum-Responsive Photocatalytic Hydrogen Evolution from Pure Water

Red phosphorus is a promising photocatalyst with wide visible-light absorption up to 700 nm, but the fast charge recombination limits its photocatalytic hydrogen evolution reaction (HER) activity. Now, [001]-oriented Hittorf's phosphorus (HP) nanorods were successfully grown on polymeric carbon nitride (PCN) by a chemical vapor deposition strategy. Compared with the bare PCN and HP, the optimized PCN@HP hybrid exhibited a significantly enhanced photocatalytic activity, with HER rates reaching 33.2 and 17.5 μmol h⁻¹ from pure water under simulated solar light and visible light irradiation, respectively. It was theoretically and experimentally indicated that the strong electronic coupling between PCN and [001]-oriented HP nanorods gave rise to the enhanced visible light absorption and the greatly accelerated photoinduced electron–hole separation and transfer, which benefited the photocatalytic HER performance.     

Sustained and Controlled Release of Volatile Precursors for Chemical Vapor Deposition of Graphene at Atmospheric Pressure

Precursors and catalysts play vital roles in chemical reactions. Considerable efforts have been devoted to the investigation of catalysts for graphene growth by chemical vapor deposition in recent years. However, there has been little research on precursors because of a lack of innovation in term of creating a controllable feeding method. Herein, we present a novel sustained and controlled release approach, and develop a convenient, safe, and potentially scalable feeding system with the assistance of matrix materials and a simple portable feeder. As a result, a highly volatile liquid precursor can be fed accurately to grow large-area, uniform graphene films with optimal properties. This feeding approach will further benefit the synthesis of other two-dimensional materials from various precursors.