The potential use of electrospun polylactic acid nanofibers as alternative reinforcements in an epoxy composite system

This pilot study elaborates the development of novel epoxy/electrospun polylactic acid (PLA) nanofiber composites at the fiber contents of 3, 5, and 10 wt % to evaluate their mechanical and thermal properties using flexural tests and differential scanning calorimetry (DSC). The flexural moduli of composites increase remarkably by 50.8 and 24.0% for 5 and 10 wt % fiber contents, respectively, relative to that of neat epoxy. Furthermore, a similar trend is also shown for corresponding flexural strengths being enhanced by 31.6 and 4.8%. Fractured surface morphology with scanning electron microscopy (SEM) confirms a full permeation of cured epoxy matrix into nanofiber structures and existence of nondestructive fibrous networks inside large void cavities. The glass transition temperature (T_g) of composites increases up to 54–60 °C due to embedded electrospun nanofibers compared to 50 °C for that of epoxy, indicating that fibrous networks may further restrict the intermolecular mobility of matrix in thermal effects. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 618–623     

Direct Estimation of the Surface Location of Immobilized Functional Groups for Concerted Catalysis Using a Probe Molecule

The location of active sites during concerted catalysis by a metal complex and tertiary amine on a SiO₂ surface is discussed based on the interaction between the functionalized SiO₂ surface and a probe molecule, p‐formyl phenylboronic acid. The interactions of the probe molecule with the surface functionalities, diamine ligand, and tertiary amine, were analyzed by FT‐IR and solid‐state ¹³C and ¹¹B MAS NMR. For the catalyst exhibiting high 1,4‐addition activity, the diamine ligand and tertiary amine base exist in closer proximity than in the catalyst with low activity.     

Reactions of a Silylyne Complex with Aldehydes: Formation of W−Si−O−C Four-Membered Metallacycles and Their Metathesis-Like Fragmentation

A tungsten silylyne complex having a W≡Si triple bond reacted with two molecules of aldehydes at room temperature to give W−Si−O−C four-membered metallacycles by [2+2] cycloaddition and subsequent formyl hydrogen transfer from one aldehyde molecule to another. Upon heating to 70 °C, the four-membered metallacycles underwent metathesis-like fragmentation cleanly to afford carbyne complexes and “silanoic esters,” in a manner similar to that of metallacyclobutadiene, an intermediate of alkyne metathesis reactions, and dimerization of the latter products gave 1,3-cyclodisiloxanes. The “silanoic ester” was also trapped by pivalaldehyde to give a [2+2] cycloaddition product in high yield.     

Total Synthesis and Structure Elucidation of JBIR‐39: A Linear Hexapeptide Possessing Piperazic Acid and γ‐Hydroxypiperazic Acid Residues

The total synthesis and stereochemical structural elucidation of JBIR‐39, containing four nonproteinogenic piperazic acid (Piz) residues, is reported. The synthesis includes Sc(OTf)₃‐catalyzed acylation of a Piz(γ‐OTBS) derivative with piperazic acid chloride, providing the desired Piz‐Piz(γ‐OTBS) dipeptide in high yield without epimerization. After assembling two additional Piz moieties and (S)‐isoleucic acid at the N‐terminus, amidation with the (R)‐α‐methylserine ester at the C‐terminus, and deprotection afforded the desired (2R,8S)‐hexapeptide, which is the assumed structure of JBIR‐39. Although the spectral data of the (2R,8S)‐hexapeptide was not identical to JBIR‐39, further synthesis of three stereoisomers confirmed the stereochemical structure of JBIR‐39 to be (2S,6S,8S,11R,16S,21R,26S,27S).     

Synthesis and optoelectronic properties of conjugated polymers based on a dithienobenzimidazole unit in the main chain

Three conjugated polymers with the dithienobenzimidazole (DTBIm) unit ( P1 , P3 , and P4 ) and one conjugated polymer with the dithienobenzoxazole unit ( P2 ) were synthesized by the cross‐coupling polymerization. The absorption maxima showed a red‐shift in the order of P3 (406 nm), P2 (426 nm), P1 (438 nm), and P4 (450 nm), which was studied in detail using the frontier molecular orbital calculation of the model compounds. The energy levels of the highest occupied molecular orbital and the lowest unoccupied molecular orbital of the DTBIm unit‐containing conjugated polymers were estimated by the cyclic voltammetry. The transformation from DTBIm ( P4 ) to dithienobenzimidazolium ( P4' ) was also carried out to shift the absorption maxima of P4' (454 nm) by promoting the intramolecular charge transfer between the DTBIm and thiophene units. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 401–409     

Trifluoroethylxanthate as an Analytical Reagent: AAS of Zinc,Antimony and Lead After Coprecipitation of Their Trifluoroethylxanthates onto Microcyrstalline Naphthalene

Abstract

A sensitive method has been developed for the direct atomic absorption spectrometric determination of zinc, antimony and lead after coprecipitation of their trifluoroethylxanthates onto microcrystalline naphthalene. The metal xanthates are quantitatively coprecipitated over the pH ranges: Zn, 5.9–8.4; Sb, 4.0–6.0 and Pb, 4.0–11.0. The solid mass consisting of the metal complex and naphthalene is dissolved in DMF. This solution is aspirated into an air-acetylene flame at 213.9, 217.6 and 217.0nm for Zn, Sb and Pb, respectively. Beer's law is obeyed in the concentration range 2–50, 3–90 and 5–60 μg of Zn, Sb and Pb, respectively in 10ml of the final DMF solution. RSDs are at the ± (0.5–0.6)% level (n=10). The concentration for 1% absorption is 0.019, 0.035 and 0.060μg/ml for Zn, Sb and Pb, respectively. The method is suitable for the preconcentration of the metals from a larger volume of the aqueous phase, and has been employed for their determination in standard reference materials. It may be employed for the simultaneous determination of Zn, Pb and Sb in a solution by pH control.     

Binding of acetylcholine and quaternary ammonium compounds to a C3-symmetric bowl-shaped tripeptide of 2-(3-aminophenoxy)propanoic acids acting as a ditopic receptor

The new tripeptide reported here is composed of (R)-2-(3-aminophenoxy)propionic acid and is a bowl-shaped receptor that simultaneously binds both cations and anions of acetylcholine chloride and benzyltrimethylammonium compounds. An intriguing conformational change of the host was observed in the complexation of the ionic pair, where anion-induced flipping of the amide group on the macrocycle occurred.     

Organocatalytic head-to-tail dimerization of methacrolein via conjugate addition of methanol: an alcohol activation mechanism proved by electrospray ionization mass spectrometry

The head-to-tail dimerization of methacrolein via the conjugate addition of methanol is catalyzed by various organic bases, such as an amine, phosphine, and N-heterocyclic carbene, to give 2,4-dimethyl-2-methoxymethylpentane-1,5-dial in moderate yields. Based on the interpretation of the key intermediates by electrospray ionization mass spectrometry, we propose a reaction mechanism involving the initial conjugate addition of the organic bases to methacrolein to generate a zwitterionic base followed by the activation of methanol.     

One-pot synthesis of 4-substituted 4-alkoxy-1,4-dihydro-3,1-benzoxazine-2-thiones by the reaction of 2-isothiocyanatobenzoates with organolithiums

An efficient one-pot procedure for the preparation of 4-substituted 4-alkoxy-1,4-dihydro-3,1-benzoxazine-2-thiones from 2-isothiocyanatobenzoates has been developed. Thus, 2-isothiocyanatobenzoates were reacted with organolithiums including lithium enolates of acetates and tertiary acetamides in THF at −78 °C to give the desired products in generally good yields.