Liquid chromatography–high-resolution mass spectrometry for identifying aqueous chlordecone hydrate dechlorinated transformation products formed by reaction with zero-valent iron

Chlordecone (CLD) is a persistent toxic chlorinated pesticide which contaminates different ecosystems in French West Indies. A soil remediation process including zero-valent iron (ZVI) has produced promising results but failed to completely degrade CLD, and the analytical procedures used yielded little information on the transformation products. To fill these gaps, dechlorination of aqueous CLD by micrometric particles of ZVI has been investigated. Aliquots of water with 25% (v/v) of acetone spiked with 100 ppm CLD were taken at different times during a 30-day ZVI treatment and directly analysed by ultra-high-performance liquid chromatography in negative electrospray ionisation mode. CLD has been totally transformed after 14 days into 14 dechlorinated degradation products, including 9 isomeric compounds. The maximum chloride concentrations appearing in the medium represent 44% of that which would result from total dechlorination of CLD. The CLD transformation products identified by accurate mass measurements on an ultra-high-resolution Q-TOF mass spectrometer (Q-TOF-MS) were C₁₀H₃Cl₉O₂, C₁₀H₄Cl₈O₂, C₁₀H₅Cl₇O₂, C₁₀H₆Cl₆O₂ and C₁₀H₇Cl₅O₂. The results show the interest of LC-Q-TOF-MS for identifying transformation products of organic contaminants, and the effectiveness of micrometric ZVI particles to totally transform CLD into less chlorinated products.     

Synthesis,Characterization and Theoretical Study of the Chemical Reactivity of New Cyclic Sulfamides Linked to Tetrathiafulvalene

Abstract

The synthesis of the title compounds has been carried out by condensation via a Wittig-type reaction of a pyridinium hexafluorophosphate with a phosphonate ester to give the desired (4-nitrophenyl)tetrathiafulvalene the nitro group of which was reduced to an amino group. Reaction of the amine with chlorosulfonyl isocyanate and subsequently with tert-butyl alcohol gave the corresponding open-chain sulfamide. Cyclization under basic conditions and de-protection led to 2-[4-(4′,5′-dipropyltetrathiafulvalen-4-yl)]phenyl-1,2,6-thiadiazinane 1,1-dioxide. Finally, N-alkylated and N-acylated cyclic sulfamides linked to tetrathiafulvalene were obtained. Their electron donor ability was measured by cyclic voltammetry. A detailed DFT study based on B3LYP/6–31G (d,p) of electronic properties is also presented. The calculated molecular electrostatic potential shows that, the negative charge covers the nitro and sulfamide function, while positive charge is located at the hydrogen atoms of the amine and sulfamide rings. The calculated HOMO and LUMO energy reveals that charge transfer occurs within the molecule. The chemical reactivity parameters reveal that tetrathiafulvalene 1 is highly reactive, which facilitates the desired formation of the cyclic sulfamide. The first hyperpolarizability β_tot shows that compounds 1 and 5 are good candidates as a NLO material.     

Inhibition efficiency and adsorption mechanism of 4-aminobenzoic acid for copper corrosion in nitric acid medium: a combined experimental and theoretical investigation

Structural Chemistry - A combined experimental and theoretical study is presented to predict and analyze the inhibition efficiency and adsorption mechanism of 4-aminobenzoic acid molecule for...     

Antioxidant activity,phytochemical screening,and total phenolic content of extracts from three genders of carob tree barks growing in Morocco

We evaluated the in vitro antioxidant property and phytochemical constituents of the crude ethyl acetate and methanol extract of the three genders of carob tree barks (spontaneous male, spontaneous female, and grafted female). The scavenging activity on DPPH (1,1-diphenyl-2-picrylhydrazyl) was determined, as well as the phenolic contents (Folin–Ciocalteu method) of both the extracts. The highest antioxidant activity and the higher amounts of total phenols were shown in methanol crude bark extract for the three genders. Variety significantly affected the phenol content and the antioxidant activity, with the spontaneous male variety globally showed a higher polyphenol concentration and antioxidant activity than the grafted female and spontaneous female.     

Water enables transimination between hindered ketimines and β-aminoalcohols and selective protection of a vicinal diamine backbone

Water mediates synthesis of novel hindered Schiff bases via transmination protocol. The feature of the procedure is that it allows both tuning of steric and electronic factors of the substituents and mono-imination of vicinal diamines, which potentially facilitates one-pot approach to unsymmetrical metal ligands.     

Simple and efficient cleavage reaction of the boc group in heterocyclic compounds

Dedicated to the memory of Pr. Ladjama Daif A series of chiral cyclosulfamides have been synthesized by alkaline cyclisation starting from N‐benzoylamino acids (Ala, Val, Leu, Phe) derivatives and chlorosulfonyl isocyanate. A simplified and regioselective deprotection of the cyclic compounds (cyclosulfamides) containing the tert‐butyloxycarbonyl group (Boc) has been achieved in good yield by fusion under reduced pressure.     

Textural,structural and catalytic behavior of low specific area silica-supported copper catalysts: effect of preparation method

Supported copper catalysts on low surface area silica were prepared by several methods and characterized by AAS, XRD, N₂ adsorption, SEM, H₂-TPR, N₂O titration, TGA-DTA, UV–Vis techniques. Their hydrogenating properties were examined in the gas-phase hydrogenation of benzaldehyde. The analysis of characterization results revealed that the choice of preparation method affected the texture, composition, and structure of the calcined and reduced Cu/SiO₂ catalysts. The dispersion and size distribution of copper species was present in different forms in the catalysts that exhibited low specific surface areas. In gas-phase hydrogenation of benzaldehyde to benzyl alcohol, the catalysts tested at the reaction temperatures of 160 and 200 °C were stable and conducted to a good catalytic activity and benzyl alcohol selectivity ranging between 5 and 39 µmol min^?1 g^?1 and 0–95%, respectively. The activity of the catalysts in gas-phase hydrogenation also depended on the particle size and the nature of copper species formed on low surface area silica.     

Remarkable steric effects and influence of monodentate axial ligands l on the spin-crossover properties of trans-[FeII(N4 ligand)L] complexes

Iron(II) complexes obtained from tetradentate, rigid, linear N4 ligands have been investigated to appraise the influence of steric effects and the impact of trans-coordinated anions on the spin-transition behavior. As expected, the well-designed ligands embrace the metal center, resulting in octahedral iron(II) complexes where the basal plane is fully occupied by the pyridine/pyrazole N4 ligand, while anions or solvent molecules are exclusively axially coordinated. Precursor complexes, namely, [Fe(bpzbpy)(MeOH)2](BF4)2 (where bpzbpy symbolizes the ligand 6,6'-bis(N-pyrazolylmethyl)-2,2'-bipyridine) and [Fe(mbpzbpy)(MeOH)2](BF4)2 (where mbpzbpy symbolizes the ligand 6,6'-bis(3,5-dimethyl-N-pyrazolmethyl)-2,2'-bipyridine), have been used for the in situ preparation of a series of structural analogues via the exchange of the weakly coordinated trans methanol molecules by various anions, such as thiocyanate, selenocyanate, or dicyanamide. The magnetic properties of all seven iron(II) compounds thus obtained have been investigated. Two iron(II) complexes, i.e., [Fe(bpzbpy)(NCS)2] and [Fe(bpzbpy)(NCSe)2], exhibit gradual spin-crossover (SCO) properties typical of isolated mononuclear species with weak cooperative interaction. These two SCO materials have been studied by M?ssbauer spectroscopy, and the light-induced excited spin state trapping effect has been investigated, revealing the possibility to induce the spin-transition both by temperature variation and by light irradiation. A correlation between steric/anion effect and SCO behavior is suggested.     

Investigation on corrosion inhibition and adsorption mechanism of azomethine derivatives at mild steel/0.5 ​M ​H2SO4 solution interface: Gravimetric,electrochemical, SEM and EDX studies

The inhibition performance of five azomethine derivatives such as: 1-(4-Methyloxy phenylimino)-1-(phenylhydrazono)-propan-2-one (SB₁), 1-(4-Methylphenylimino)-1-(phenylhydrazono) propan-2-one (SB₂), 1-(phenylimino)-1(phenylhydrazono)-propan-2-one (SB₃), 1-(4-Bromo phenylimino)-1(phenylhydrazono)-propan-2-one (SB₄) and 1-(4-Chlorophenylimino)-1(phenylhydrazono) -propan-2-on (SB₅) as corrosion inhibitors for mild steel in sulfuric acid 0.5 ?M were investigated using different methods. All experimental results demonstrate that these compounds are eficients inhibitors. The inhibition efficiencies ($IE$) increase with inhibitors concentration. At 7.5 $\times$ 10^?5 ?M, the $IE$ was 97.27%, 96.31%, 94.23%, 93.19 and 91.64% for SB₁, SB₂, SB₃, SB₄ and SB₅, respectively. The potentiodynamic polarization results indicated that all the studied inhibitors act as mixed type. The adsorption process on mild steel surface obeyed Langmuir isotherm. The associated activation parameters and thermodynamic have been calculated and discussed. The adsorbed film formed on the metal surface was characterized by SEM and EDX.