Polypyrrole nanotube modified by gold nanoparticles for improving the neural microelectrodes

Journal of Solid State Electrochemistry - High selectivity and low impedance are preferred properties for neural microelectrodes. The localized and controlled release of drugs from the...     

Static Headspace GC/MS Method for Determination of Methanol and Ethanol Contents,as the Degradation Markers of Solid Insulation Systems of Power Transformers

Methanol in insulating oil has been proposed as a new marker for condition assessment of the solid insulation system of power transformers. In the current work, as a first step of using the new marker, an analytical static headspace gas chromatography/mass spectrometry method has been developed, optimized, and validated to measure methanol and ethanol contents in the insulating mineral oil. The analyzing setup consists of a 6890 N gas chromatograph equipped with a 5973 network mass spectrometer (MS) in the absence of a costly headspace autosampler, and the chromatography separation was performed on a 60 m × 320 µm × 0.5 µm VF-WAXms GC column. Calibration curves have been provided using several concentrations of the alcohols, and also limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation percentage (RSD%) have been determined.     

Controlling the probe-absorption and -dispersion via quantum interference from incoherent pumping field in a four-level lambda-type system

Absorptive and dispersive properties of a four-level Λ-type atomic system with two fold lower levels are investigated. The effect of quantum interference induced by incoherent pump and spontaneous emission upon the absorption, dispersion, and group index is them discussed. In addition, the rate of an incoherent pump field and the intensity of coupling field on light propagation is also presented.     

An enhanced refractive index with suppressed absorption in a graphene nanostructure under external magnetic field

The dispersive-absorptive optical properties of a weak probe field are investigated based on quantum coherence and interference in a Landau-quantized graphene structure. It is found that an enhanced refractive index with vanishing absorption can be obtained in this structure through proper adjusting the controlling parameters of the system. The switching between superluminal and subluminal light propagation is also discussed. Our scheme can be employed in real experiments to develop new types of nanoelectronic devices for realizing all-optical switching process and can have practical application in dispersion compensation and solid-state quantum communication.     

Synthesis of Gd<Subscript>0.5</Subscript>Sr<Subscript>0.5</Subscript>FeO<Subscript>3</Subscript> perovskite-type nanopowders for adsorptive removal of MB dye from water

In the present study, nanoparticles of perovskite-type Gd_0.5Sr_0.5FeO₃ (GSFO) were fabricated by a sol–gel method. A series of analytical techniques were used to characterize the crystallinity, morphology, specific surface area and grain size of GSFO powders. The thermal decomposition process of the complex precursor was examined by means of differential thermal analysis–thermal gravimetric analysis. X-ray diffraction results showed that a single perovskite phase was completely formed after calcination at 700 °C. In addition, transmission electron microscopy images revealed that the average size of the particles is approximately 35.23 nm in diameter. The surface morphology and composition of these nanopowders were also investigated using a scanning electron microscope and an energy dispersive X-ray spectrometer. GSFO nanoparticles showed excellent adsorption efficiency towards methylene blue dye in aqueous solution. The adsorption studies were carried out at different pH values, initial dye concentrations, various adsorbent doses and contact time in batch experiments. The dye removal efficiency was found to be increased with increasing the initial pH of the dye solution, and GSFO exhibited good dye removal efficiency at a basic pH, especially at a pH of 12. Experimental results indicated that the adsorption kinetic data follow a pseudo-second-order rate for the tested dye. The isotherm evaluations revealed that the Redlich–Peterson model attained better fits to the experiment's equilibrium data than the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich models.     

Development of a Reversed-Phase Liquid Chromatographic Assay for the Quantification of Total Persipeptides in Fermentation Broth

The emergence and prevalence of multi-drug-resistant bacterial strains increase the potential for outbreaks of incurable infections. The discovery of novel antibiotics and pharmacological preparations requires the identification of novel bioactive small molecules. A specific, sensitive, and reliable quantification method using high-performance liquid chromatography (HPLC) with UV detection was developed for the determination of total persipeptides (A and B), which are cyclic pentapeptides found in the fermentation broth of Streptomyces zagrosensis UTMC 1154 that exhibit bioactivity against methicillin-resistant Staphylococcus aureus (MRSA). A simple liquid–liquid extraction (LLE) method using butanol was employed to extract persipeptides from the fermentation broth prior to HPLC analysis. The chromatographic separation of persipeptides and the internal standard, virginiamycin, was achieved with a gradient of acetonitrile and water on a C18 reversed-phase analytical column in a 25-min analytical run utilizing a flow rate of 0.8 mL min⁻¹ and detection at 210 nm. The whole assay was validated, and the method presented a linear response range with a regression coefficient of determination R ² of 0.9996 for the quantification of persipeptides in the concentration range of 3.9–250.0 µg mL⁻¹, as well as extraction recoveries ranging from 54.78 ± 9.83 % to 56.45 ± 16.33 %. The bias and the precision of the proposed method were <10 %. The detection and quantification limits for the persipeptides were 27 and 83 µg L⁻¹, respectively.

     

Construction of solid-liquid phase diagrams in ternary systems by titration calorimetry

Titration calorimetry was used to construct the solid-liquid equilibrium line in ternary systems containing the solute and an aqueous mixed solvent by measuring the heat of dissolution of the solid solute during successive additions of the liquid solvent. The plot of cumulated heats versus the mole ratio, n_solvent/n_solute, yields two (almost) linear increases of different slopes. These two lines represent successively the enthalpy of dissolution then the enthalpy of dilution of the medium; their intersection gives the solubility and the enthalpy of dissolution of the solute. Phase diagrams have been established over the whole concentration range for o-anisaldehyde, 1,3,5-trimethoxybenzene and vanillin, in water + methanol, +ethanol, or +n-propanol at 303, 313 and 318 K.     

Optical properties of an open three-level atomic system via coherent and incoherent fields

In this paper, coherent and incoherent control of optical properties of open ladder- type three-level atomic system is investigated. It is shown that in the presence of spontaneously generated coherence (SGC) and incoherent pumping filed, group velocity, absorption and dispersion of the probe field can be controlled by adjusting the ratio between atomic injection and exit rates. Also, the bistabal behaviors of the system are discussed. It is shown that the ratio between atomic injections and exit rate can influence the bistabal threshold intensity and related hysteresis loop. More interestingly, it is found that SGC and incoherent pumping field effects have a central role for distinguishing between open and closed system.     

Thermally stimulated depolarization current spectra of cross-linked polyethylene and the influence of cross-linking byproducts

Cross-linked polyethylene (XLPE) is notable for its use as power cable insulation. Its longevity is limited by space charge buildup linked to impurities such as the byproducts left behind by the cross-linking agent dicumyl peroxide (DCP). The goal of this work is to determine the impacts of these byproducts on charge trapping and detrapping in XLPE using the thermally stimulated depolarization current technique. XLPE with byproducts has one source of trapped charge, which originates from the byproducts. XLPE that was thermally treated via degassing exhibits two other sources of trapped charge, which are charge injection and dipolar relaxations. Oxidation from degassing was shown to control the trapping from these sources, which is useful knowledge for processing this material prior to its use. Reintroducing acetophenone, one of the major byproducts of DCP, suppresses those two peaks once more, showing that it controls the overall space charge buildup characteristics in XLPE.