拓扑近藤绝缘体SmB6中的奇异电子性质

拓扑近藤绝缘体是一种本征的强关联拓扑电子体系，其体能隙来源于近藤关联效应。自2010年拓扑近藤绝缘体的理论概念被提出后，六硼化钐(SmB6) 作为第一种被预测为拓扑近藤绝缘体的材料在这十多年中被多种实验手段反复研究验证，被广泛接受认为是第一种拓扑近藤绝缘体。在这篇综述中，我们回顾了关于SmB6 的一些重要实验结果，比如电输运测量，角分辨光电子能谱(ARPES), 表面形貌分析(STM) 等，并论述了如何通过这些关键的实验证据证实SmB6 的拓扑近藤绝缘物相。同时，我们也展示了SmB6 这一关联电子体系的其他奇异物性，包括中间价态在表面和体内的分离现象，以及量子振荡发现的体振荡信号等等。这些性质表明我们对SmB6 这一材料的理解仍然不充分，其中还有更为丰富的物理值得挖掘。     

Rationally Design of Near Infrared Light Responsive Micro‐Photoelectrodes for In Vivo Sensing of Neurotransmitter Molecules in Mouse Brain†

The accurate quantification of neurotransmitter molecules is an indispensable means to reveal the physiological mechanisms of neuro movement in molecular level. However, existing detection strategies cannot fully meet practical needs, and the on‐site and in vivo detection of neurotransmitters in brain remains a great challenge. Here, we report the development of a near infrared light responsive photoelectrochemical (PEC) detection method for in vivo quantification of neurotransmitter dopamine in mouse brain. Under guidance of density function theory calculations, a combination strategy of non‐metal cation doping and defect engineering is introduced to rationally design the micro‐photoelectrodes with excellent biocompatibility and stability and implements the in vivo PEC detection of dopamine in mouse brain. It opens up a new way for the accurate in vivo detection of biomolecules and allows researchers to make novel inquiries for long‐standing questions in a new way.     

Free control of far-field scattering angle of transmission terahertz wave using multilayer split-ring resonators’ metasurfaces

To enhance transmission efficiency of Pancharatnam–Berry (PB) phase metasurfaces, multilayer splitring resonators were proposed to develop encoding sequences. As per the generalized Snell’s law, the deflection angle of the PB phase encoding metasurfaces depends on the metasurface period’s size. Therefore, it is impossible to design an infinitesimal metasurface unit; consequently, the continuous transmission scattering angle cannot be obtained. In digital signal processing, this study introduces the Fourier convolution principle on encoding metasurface sequences to freely control the transmitted scattering angles. Both addition and subtraction operations between two different encoding sequences were then performed to achieve the continuous variation of the scattering angle. Furthermore, we established that the Fourier convolution principle can be applied to the checkerboard coded metasurfaces.     

The metabolites and biotransformation pathways in vivo after oral administration of ocotillol,RT5, and PF11

Ocotillol, pseudo-ginsenoside RT5 (RT₅), and pseudo-ginsenoside F₁₁ (PF₁₁) are ocotillol-type saponins that have the same aglycone structure but with different numbers of glucose at the C-6 position. In this study, the metabolites of ocotillol, RT₅, and PF₁₁ in rat plasma, stomach, intestine, urine, and feces after oral administration were investigated by ultra-performance liquid chromatography coupled with time-of-flight mass spectrometry. The results showed that RT₅ was easily biotransformed into metabolites in vivo, whereas PF₁₁ and RT₅ were difficult to be biotransformed. Hydrogenation, dehydrogenation, dehydration, deglycosylation, deoxygenation, hydration, phosphorylation, deoxidation, glucuronidation, and reactions combining amino acid were speculated to be involved in the biotransformation of ocotillol, RT₅, and PF₁₁. Based on the structural analysis of metabolites, it was deduced that hydrogenation, dehydration, deoxidation, and reactions combining amino acid occurred on the aglycone structure, whereas deglycosylation, hydration, and phosphorylation occurred on the glycosyl chain. Further, metabolites in plasma, urine, feces, and tissues were different: First, glucuronidation products were found in urine, stomach, intestine, and feces, but not in plasma. Second, the ocotillol prototype was not identified in urine samples. Third, the RT₅ prototype was found in stomach, intestine, feces, and urine, but not in plasma.     

Statistical Optimization of Flavonoid and Antioxidant Recovery from Macerated Chinese and Malaysian Lotus Root (Nelumbo nucifera) Using Response Surface Methodology

In this study, the combination of parameters required for optimal extraction of anti-oxidative components from the Chinese lotus (CLR) and Malaysian lotus (MLR) roots were carefully investigated. Box–Behnken design was employed to optimize the pH (X₁: 2–3), extraction time (X₂: 0.5–1.5 h) and solvent-to-sample ratio (X₃: 20–40 mL/g) to obtain a high flavonoid yield with high % DPPH_sc free radical scavenging and Ferric-reducing power assay (FRAP). The analysis of variance clearly showed the significant contribution of quadratic model for all responses. The optimal conditions for both Chinese lotus (CLR) and Malaysian lotus (MLR) roots were obtained as: CLR: X₁ = 2.5; X₂ = 0.5 h; X₃ = 40 mL/g; MLR: X₁ = 2.4; X₂ = 0.5 h; X₃ = 40 mL/g. These optimum conditions gave (a) Total flavonoid content (TFC) of 0.599 mg PCE/g sample and 0.549 mg PCE/g sample, respectively; (b) % DPPH_sc of 48.36% and 29.11%, respectively; (c) FRAP value of 2.07 mM FeSO₄ and 1.89 mM FeSO₄, respectively. A close agreement between predicted and experimental values was found. The result obtained succinctly revealed that the Chinese lotus exhibited higher antioxidant and total flavonoid content when compared with the Malaysia lotus root at optimum extraction condition.     

Experiment and simulation of environmental chamber performance for fuel cell vehicle engine system

Journal of Thermal Analysis and Calorimetry - Comprehensive performance experiments were carried out, and the thermodynamic temperature simulation model was established based on the independently...     

Solution-Based,Anion-Doping of Li4Ti5O12 Nanoflowers for Lithium-Ion Battery Applications

Solution-based, anionic doping represents a convenient strategy with which to improve upon the conductivity of candidate anode materials such as Li₄Ti₅O₁₂ (LTO). As such, novel synthetic hydrothermally-inspired protocols have primarily been devised herein, aimed at the large-scale production of unique halogen-doped, micron-scale, three-dimensional, hierarchical LTO flower-like motifs. Although fluorine (F) doping has been explored, the use of chlorine (Cl) dopants is the primary focus here. Several experimental variables, such as dopant amount, lithium hydroxide concentration, and titanium butoxide purity, were probed and perfected. Furthermore, the Cl doping process did not damage the intrinsic LTO morphology. The analysis, based on interpreting a compilation of SEM, XRD, XPS, and TEM-EDS results, was used to determine an optimized dopant concentration of Cl. Electrochemical tests demonstrated an increased capacity via cycling of 12 % for a Cl-doped sample as compared with pristine LTO. Moreover, the Cl-doped LTO sample described in this study exhibited the highest discharge capacity yet reported at an observed rate of 2C for this material at 143mAh g⁻¹. Overall, these data suggest that the Cl dopant likely enhances not only the ion transport capabilities, but also the overall electrical conductivity of our as-prepared structures. To help explain these favorable findings, theoretical DFT calculations were used to postulate that the electronic conductivity and Li diffusion were likely improved by the presence of increased Ti³⁺ ion concentration coupled with widening of the Li migration channel.     

Robustly topological mixing of Kan's map

In 1994, I. Kan constructed a smooth map on the annulus admitting two physical measures, whose basins are intermingled. In this paper, we prove that Kan's map is $C^2$ robustly topologically mixing.     

Understanding the Origin of Highly Selective CO2 Electroreduction to CO on Ni,N-doped Carbon Catalysts

Ni,N-doped carbon catalysts have shown promising catalytic performance for CO₂ electroreduction (CO₂R) to CO; this activity has often been attributed to the presence of nitrogen-coordinated, single Ni atom active sites. However, experimentally confirming Ni−N bonding and correlating CO₂ reduction (CO₂R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile-derived Ni,N-doped carbon electrocatalysts (Ni-PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO₂R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X-ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square-planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.     

以磷化铁为添加剂沿(111)面生长磷掺杂金刚石大单晶

掺杂是调控金刚石性能的一种重要手段。本文采用温度梯度法,在5.6 GPa、1 312 ℃的条件下,选用Fe₃P作为磷源进行磷掺杂金刚石大单晶的合成。金刚石样品的显微光学照片表明,随着Fe₃P添加比例的增加,金刚石晶体的颜色逐渐变深,包裹体数量逐渐增加,晶形由板状转变为塔状直至骸晶。金刚石晶形的变化表明Fe₃P的添加使生长金刚石的V形区向右偏移,这是Fe₃P改变触媒特性的缘故。红外光谱分析表明,Fe₃P的添加使金刚石晶体中氮含量上升,这说明磷的进入诱使氮原子更容易进入金刚石晶格中。激光拉曼光谱测试表明,随着Fe₃P添加比例的增加,所合成的掺磷金刚石的拉曼峰位变化不大,其半峰全宽(FWHM)值变大,这说明磷的进入使得金刚石晶格畸变增加。XPS测试结果显示,随着Fe₃P添加比例的增加,金刚石晶体中磷相对碳的原子百分含量也会增加,这意味着添加Fe₃P所合成的金刚石晶体中有磷存在。