Solvent‐Dependent Structure of the I3− Ion Derived from Photoelectron Spectroscopy and Ab Initio Molecular Dynamics Simulations

Ab initio molecular dynamics (MD) simulations of the solvation of LiI₃ in four different solvents (water, methanol, ethanol, and acetonitrile) are employed to investigate the molecular and electronic structure of the I₃^? ion in relation to X‐ray photoelectron spectroscopy (XPS). Simulations show that hydrogen‐bond rearrangement in the solvation shell is coupled to intramolecular bond‐length asymmetry in the I₃^? ion. By a combination of charge analysis and I 4 d core‐level XPS measurements, the mechanism of the solvent‐induced distortions has been studied, and it has been concluded that charge localization mediates intermolecular interactions and intramolecular distortion. The approach involving a synergistic combination of theory and experiment probes the solvent‐dependent structure of the I₃^? ion, and the geometric structure has been correlated with the electronic structure.     

Vinylic MIDA Boronates: New Building Blocks for the Synthesis of Aza‐Heterocycles

A two‐step synthesis of structurally diverse pyrrole‐containing bicyclic systems is reported. ortho‐Nitro‐haloarenes coupled with vinylic N‐methyliminodiacetic acid (MIDA) boronates generate ortho‐vinyl‐nitroarenes, which undergo a “metal‐free” nitrene insertion, resulting in a new pyrrole ring. This novel synthetic approach has a wide substrate tolerance and it is applicable in the preparation of more complex “drug‐like” molecules. Interestingly, an ortho‐nitro‐allylarene derivative furnished a cyclic β‐aminophosphonate motif.     

Investigations into distribution of lidocaine in human autopsy material

With screening methods in the legal medicine drugs were often detected in autopsy material. In this study the antiarrhythmic and the local anesthetic drug lidocaine could be proved in fifty‐one cases and determined in different autopsy materials. For the first time the comparison of so many distribution patterns of lidocaine in human compartments was possible. A liquid‐liquid extraction procedure, a standard addition method and LC/MS/MS were used for analytics. The measured concentrations in blood were in the therapeutic range or lower. The time between lidocaine application and death was given in twenty‐nine cases. These data were very helpful to estimate and interpret the distribution process of lidocaine between application and death. This time exerted a crucial influence on the distribution of lidocaine in the compartments. Most of the intravenous applicated lidocaine was found in heart blood after a very short time of distribution. Afterwards the highest concentrations were measured in brain. Later the highest concentration was found in the kidney samples or in urine. If the time between lidocaine application and death is known, the results of this study can be used to deepen the knowledge of its pharmacokinetics. If this time is unknown, the circumstances and the causes of death can be better explained. Copyright © 2015 John Wiley & Sons, Ltd.     

Reactivity of Diarylnitrenium Ions

Hydride abstraction from diarylamines with the trityl ion is explored in an attempt to generate a stable diarylnitrenium ion, Ar₂N⁺. Sequential H-atom abstraction reactions ensue. The first H-atom abstraction leads to intensely colored aminium radical cations, Ar₂NH^.+, some of which are quite stable. However, most undergo a second H-atom abstraction leading to ammonium ions, Ar₂NH₂⁺. In the absence of a ready source of H-atoms, a unique self-abstraction reaction occurs when Ar=Me₅C₆, leading to a novel iminium radical cation, Ar=N^.+Ar, which decays via a second self H-atom abstraction reaction to give a stable iminium ion, Ar=N⁺HAr. These products differ substantially from those derived via photochemically produced diarylnitrenium ions.     

Surface integral analogy approaches for predicting noise from 3D high-lift low-noise wings

Three surface integral approaches of the acoustic analogies are studied to predict the noise from three concep- tual configurations of three-dimensional high-lift low-noise wings. The approaches refer to the Kirchhoff method, the Ffowcs Williams and Hawkings （FW-H） method of the permeable integral surface and the Curle method that is known as a special case of the FW-H method. The first two approaches are used to compute the noise generated by the core flow region where the energetic structures exist. The last approach is adopted to predict the noise specially from the pressure perturbation on the wall. A new way to con- struct the integral surface that encloses the core region is proposed for the first two methods. Considering the local properties of the flow around the complex object-the actual wing with high-lift devices-the integral surface based on the vorticity is constructed to follow the flow structures. The surface location is discussed for the Kirchhoff method and the FW-H method because a common surface is used for them. The noise from the core flow region is studied on the basis of the dependent integral quantities, which are indicated by the Kirchhoff formulation and by the FW-H formulation. The role of each wall component on noise contribution is analyzed using the Curle formulation. Effects of the volume integral terms of Lighthill＇s stress tensors on the noise pre-diction are then evaluated by comparing the results of the Curle method with the other two methods.     

Methane Oxidation over Cu2+/[CuOH]+ Pairs and Site-Specific Kinetics in Copper Mordenite Revealed by Operando Electron Paramagnetic Resonance and UV/Visible Spectroscopy

Cu-exchanged mordenite (MOR) is a promising material for partial CH₄ oxidation. The structural diversity of Cu species within MOR makes it difficult to identify the active Cu sites and to determine their redox and kinetic properties. In this study, the Cu speciation in Cu-MOR materials with different Cu loadings has been determined using operando electron paramagnetic resonance (EPR) and operando ultraviolet-visible (UV/Vis) spectroscopy as well as in situ photoluminescence (PL) and Fourier-transform infrared (FTIR) spectroscopy. A novel pathway for CH₄ oxidation involving paired [CuOH]⁺ and bare Cu²⁺ species has been identified. The reduction of bare Cu²⁺ ions facilitated by adjacent [CuOH]⁺ demonstrates that the frequently reported assumption of redox-inert Cu²⁺ centers does not generally apply. The measured site-specific reaction kinetics show that dimeric Cu species exhibit a faster reaction rate and a higher apparent activation energy than monomeric Cu²⁺ active sites highlighting their difference in the CH₄ oxidation potential.     

Catalytic Homologation-Allylboration Sequence for Diastereo- and Enantioselective Synthesis of Densely Functionalized β-Fluorohydrins with Tertiary Fluoride Stereocenters

Homologation of trisubstituted fluoroalkenes followed by allylboration of aldehyde, ketone and imine substrates is suitable for synthesis of β-fluorohydrin and amine products. In the presence of (R)-iodo-BINOL catalyst enantioselectivities up to 99 % can be achieved by formation of a single stereoisomer with adjacent stereocenters, of which one is a tertiary C−F center.     

A Series of Low-Coordinate Iron Selenido Complexes: Reactivity of a Linear Iron(I) Silylamide towards Selenium

A variety of different low-coordinate iron selenide complexes is reported. These are obtained by reaction of the linear iron(I) silylamide K{18c6}[Fe(N(Dipp)SiMe₃)₂] (Dipp=2,6-diisopropylphenyl) with red selenium. Careful adjustment of the reaction conditions results in the formation of unique low-coordinate selenido iron complexes, namely a monoselenide bridged [2Fe−1Se]²⁺ complex, as well as mononuclear iron per- and triselenides. Further, C−H bond activation of one of the silylamide ligands by a putative terminal iron monoselenide is observed.     

A Molecular Low-Coordinate [Fe-S-Fe] Unit in Three Oxidation States

A [Fe-S-Fe] subunit with a single sulfide bridging two low-coordinate iron ions is the supposed active site of the iron-molybdenum co-factor (FeMoco) of nitrogenase. Here we report a dinuclear monosulfido bridged diiron(II) complex with a similar complex geometry that can be oxidized stepwise to diiron(II/III) and diiron(III/III) complexes while retaining the [Fe-S-Fe] core. The series of complexes has been characterized crystallographically, and electronic structures have been studied using, inter alia, ⁵⁷Fe Mössbauer spectroscopy and SQUID magnetometry. Further, cleavage of the [Fe-S-Fe] unit by CS₂ is presented.     

Cobalt and Iron Stabilized Ketyl,Ketiminyl and Aldiminyl Radical Anions

Carbonyl and iminyl based radical anions are reactive intermediates in a variety of transformations in organic synthesis. Herein, the isolation of ketyl, and more importantly unprecedented ketiminyl and aldiminyl radical anions coordinated to cobalt and iron complexes is presented. Insights into the electronic structure of these unusual metal bound radical anions is provided by X-Ray diffraction analysis, NMR, IR, UV/Vis and Mössbauer spectroscopy, solid and solution state magnetometry, as well as a by a detailed computational analysis. The metal bound radical anions are very reactive and facilitate the activation of intra- and intermolecular C−H bonds.