Antibacterial membranes based on chitosan and quaternary ammonium salts modified nanocrystalline cellulose

Etherification of nanocrystalline cellulose (NCC) with three kinds of quaternary ammonium salts epoxypropyltrimethylammonium chloride, N,N‐dimethyl‐N‐dodecyl‐N‐(1,2‐epoxypropyl) ammonium chloride (DMDEPAC), and N,N‐dimethyl‐N‐octadecyl‐N‐(1,2‐epoxypropyl) ammonium chloride (DMOEPAC) was successfully performed via a nucleophilic addition reaction. The synthesized DMDEPAC and DMOEPAC were characterized by nuclear magnetic resonance. The modified NCC particles, NCC epoxypropyltrimethylammonium chloride, NCC‐DMDEPAC, and NCC‐DMOEPAC, were characterized by energy dispersive spectrometer. Nanocomposite films based on chitosan (CS) containing quaternary ammonium salts modified NCC were prepared with nanoparticle loadings of 5.0, 7.5, and 10.0%, respectively. The effect of nanoparticle content on the tensile strength of composite films was studied. The results indicated that the films with 5.0% nanoparticle loading exhibited the biggest increase in tensile strength. Surface morphology, smoothness, and antibacterial properties of composite films containing 5% modified NCC were also studied. CS/NCC‐DMDEPAC‐5.0 and CS/NCC‐DMOEPAC‐5.0 displayed excellent biocidal abilities against both Gram‐positive Staphylococcus aureus (ATCC 6538) and Gram‐negative Escherichia coli O157:H7 (ATCC 43895). The bio‐based nanocomposite films with increased mechanical strength and excellent antibacterial properties show great potential as food packaging materials. Copyright © 2017 John Wiley & Sons, Ltd.     

Diffusion induced void nucleation in SnPb solder joints

Towards a simple and robust model for void-based fatigue prediction, we investigate the interaction of voids with its surrounding by using a multi-field method. We couple the concentration fields of tin c₁ and lead c₂ with an additional field c₃, where the latter is assigned with a void field. The interaction potential manifests three stable states. Two are obtained by experimental results of tin-lead (SnPb) and the void stable state is postulated by construction. The logarithmic form of the thermodynamically consistent configurational entropy is approximated within this study by a fourth order polynom. It has been shown that the interfacial energy coefficient is independent of void's size, but rather depends numerically on the mesh size, which is used in the model presented here. Both governing equations follows a Cahn-Hilliard-type equation to mimic the microstructural changes. (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

On the Osipov–Pickup–Dunmur chirality index: why pseudoscalar functions are generally unsuitable to quantify chirality

The applicability of pseudoscalar functions, in general, and of the Osipov–Pickup–Dunmur chirality index, in particular, as consistent chirality measures is discussed. It is shown that due to the presence of chiral zeros these functions are unsuited to measure the chirality of objects described by more than two independent parameters.     

Quantitative Medium-Resolution NMR Spectroscopy Under Non-Equilibrium Conditions,Studied on the Example of an Esterification Reaction

Medium-resolution nuclear magnetic resonance spectroscopy is a promising tool for the monitoring of liquid reactions. For process analytical applications, the requirements of robustness and insensitivity of the spectrometer in relation to high temperatures and pressures are challenging. Within this study, a flow probe using a glass dewar is presented. Temperatures of flowing samples up to 130 °C and pressures up to 40 bar were successfully applied, and the corresponding temperature loss of the flowing sample at 2 ml min^?1 was <2.4 °C at 130 °C. Furthermore, if the process requires a measurement in a non-equilibrium state of magnetization, a comprehensive data treatment is given. For this purpose, the influences of the flow and T ₁ of the substances under investigation are studied in detail on the example of a homogeneously catalyzed esterification. In addition, data analysis schemes were designed such that the experiments directly revealed mole fractions from the spectra. Limited spectral resolutions and low signal-to-noise ratio still did not obstruct quantitative interpretation of the experiments.     

Aryl‐Phosphonate Lanthanide Complexes and Their Fluorinated Derivatives: Investigation of Their Unusual Relaxometric Behavior and Potential Application as Dual Frequency 1H/19F MRI Probes

A series of low molecular weight lanthanide complexes were developed that have high ¹H longitudinal relaxivities (r₁) and the potential to be used as dual frequency ¹H and ¹⁹F MR probes. Their behavior was investigated in more detail through relaxometry, pH‐potentiometry, luminescence, and multinuclear NMR spectroscopy. Fitting of the ¹H NMRD and ¹⁷O NMR profiles demonstrated a very short water residence lifetime (<10 ns) and an appreciable second sphere effect. At lower field strengths (20 MHz), two of the complexes displayed a peak in r₁ (21.7 and 16.3 mM ^?1 s^?1) caused by an agglomeration, that can be disrupted through the addition of phosphate anions. NMR spectroscopy revealed that at least two species are present in solution interconverting through an intramolecular binding process. Two complexes provided a suitable signal in ¹⁹F NMR spectroscopy and through the selection of optimized imaging parameters, phantom images were obtained in a MRI scanner at concentrations as low as 1 mM . The developed probes could be visualized through both ¹H and ¹⁹F MRI, showing their capability to function as dual frequency MRI contrast agents.     

Die Selivanov‐Probe auf Fructose

The Seliwanoff's test is a useful tool in biochemistry and food chemistry as test for fructose and other hexoketoses. This article depicts the life and work of Russian chemist named F. F. Selivanov, who was born in aristocratic family, was affected by revolutionary Narodniki movement, and attended the universities in Russia, Switzerland and Germany. His life is a good example of connections between Russian and German agrochemical centres in XIX century. His major achievements are the test for fructose and the first synthesis of N‐Bromosuccinimide. He is also known as a doctoral supervisor of A.E. Arbuzov, the discoverer of Michaelis‐Arbuzov reaction.     

Topochemical acetylation of cellulose nanopaper structures for biocomposites: mechanisms for reduced water vapour sorption

Moisture sorption decreases dimensional stability and mechanical properties of polymer matrix biocomposites based on plant fibers. Cellulose nanofiber reinforcement may offer advantages in this respect. Here, wood-based nanofibrillated cellulose (NFC) and bacterial cellulose (BC) nanopaper structures, with different specific surface area (SSA), ranging from 0.03 to 173.3 m²/g, were topochemically acetylated and characterized by ATR-FTIR, XRD, solid-state CP/MAS ¹³C-NMR and moisture sorption studies. Polymer matrix nanocomposites based on NFC were also prepared as demonstrators. The surface degree of substitution (surface-DS) of the acetylated cellulose nanofibers is a key parameter, which increased with increasing SSA. Successful topochemical acetylation was confirmed and significantly reduced the moisture sorption in nanopaper structures, especially at RH = 53 %. BC nanopaper sorbed less moisture than the NFC counterpart, and mechanisms are discussed. Topochemical NFC nanopaper acetylation can be used to prepare moisture-stable nanocellulose biocomposites.