Electrochemical oxidation of aliphatic amines and their attachment to carbon and metal surfaces

The electrochemical oxidation of aliphatic amines (primary, secondary, and tertiary) has been investigated by cyclic voltammetry and preparative electrolysis. The oxidation mechanisms have been established, and the lifetimes of the radical cations have been measured for secondary and tertiary amines. These results have been put in parallel with the attachment of amines to glassy carbon, Au, and Pt electrodes by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and infrared reflection-absorption spectroscopy (IRRAS). It is then possible to show that it is not the radical cation but the radical obtained after the deprotonation which reacts with the electrode surface. XPS results also point to the existence of a covalent bond between Au or Pt and the organic moiety.     

Direct atomic absorption determination of mercury in drinking water and urine using a two-step electrothermal atomizer

A new method was developed for the direct electrothermal atomic absorption determination of mercury in drinking water and urine using double vaporization in a two-step atomizer with a purged vaporizer. In this method, a sample is placed in the vaporizer of a two-step atomizer, dried, and vaporized. The sample vapor is transferred to an unheated atomizer cell with a flow of argon and trapped by the inner surface of cell walls. This procedure can be performed repeatedly to preconcentrate mercury in the atomizer cell. Next, a portion of the sample transferred to the inner surface of the atomizer cell is revaporized and atomized by heating the atomizer cell of the two-step atomizer with a purged vaporizer, and the atomic absorption of mercury is measured. It was found that the degree of mercury transfer and trapping is as high as 100% at sufficiently high temperatures of primary vaporization, regardless of the material of the inner surface of the atomizer cell. The detection limits for mercury were 0.24 or 0.024 µg/L for drinking water at a sample volume of 100 µL using a single sample transfer or the procedure repeated ten times, respectively, and 2.0 µg/L for urine at a sample volume of 20 µL and a single sample transfer. The accuracy of the results was confirmed by the analysis of certified mercury samples and samples with known additives.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 1, 2005, pp. 45–51.Original Russian Text Copyright © 2005 by Vilpan, Grinshtein, Akatov, Gucer.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

SIAmate-a compact and modular sequential injection analysis controller

A number of sequential injection analysis (SIA) measurement methods have been developed during the last years. Almost all have been used in laboratory conditions with good results, but very few have been implemented as on-line methods, applied to non-stop measurements, producing immediate results for process control. The transfer of an SIA system from laboratory to an industrial facility [J. Ruzicka, Anal. Chim. Acta 261 (1992) 3] requires a whole new range of details to be taken into account. Some SIA platform related topics will be discussed. There are numerous ways of building an SIA system that meets the needs of the industry. One alternative, SIAmate, is presented.     

Capillary isotachophoresis of some isoquinoline alkaloids

The isotachophoretic behavior of quaternary benzo/c/phenanthridine, protoberberine and aporphine alkaloids in different electrolyte systems is described. The concentration of the leading ion and the pH value of the leading electrolyte affect the relative effective mobilities of the alkaloids. The system of pH 4.7, containing the leading ion K⁺ (0.005 M) counter ion acetate, and the terminating ion β-alanine (0.02 M), has been selected for the quantitative determination of the studied alkaloids in model mixtures and plant extracts.     

Solvent-free silica gel mediated decarboxylation of C–O coupling products of β-diketones and β-oxo esters with malonyl peroxides

1. Download high-res image (154KB)
2. Download full-size image

     

Towards Polyoxometalate‐Cluster‐Based Nano‐Electronics

We explore the concept that the incorporation of polyoxometalates (POMs) into complementary metal oxide semiconductor (CMOS) technologies could offer a fundamentally better way to design and engineer new types of data storage devices, due to the enhanced electronic complementarity with SiO₂, high redox potentials, and multiple redox states accessible to polyoxometalate clusters. To explore this we constructed a custom‐built simulation domain bridge. Connecting DFT, for the quantum mechanical modelling part, and mesoscopic device modelling, confirms the theoretical basis for the proposed advantages of POMs in non‐volatile molecular memories (NVMM) or flash‐RAM.     

Effect of low-temperature annealing on the magnetization curve of YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>6 + <Emphasis Type="Italic">x</Emphasis></Subscript> ceramics

The effect of low-temperature annealing on the magnetization curve of YBa₂Cu₃O_{6 + x} ceramics in the superconducting state (x ≈ 0.9) is investigated. When the annealing time is fairly long, the field dependence of magnetic moment M exhibits a feature in the form of a plateau, where the value of M remains almost constant. The evolution of this feature in the magnetization curves of annealed samples with annealing time and temperature is studied. It is assumed that low-temperature annealing gives rise to metastable ferromagnetic clusters in YBa₂Cu₃O_{6 + x} ceramics, the contribution of which to the magnetic moment accounts for the feature in the magnetization curves of the annealed samples.