Alkane Shape- and Size-Recognized Selective Vapor Sorption in “Channel-Like” Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C−C and C−H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated “channel-like” crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique “gate-opening” mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.     

Computational Analysis Reveals a Critical Point Mutation in the N-Terminal Region of the Signaling Lymphocytic Activation Molecule Responsible for the Cross-Species Infection with Canine Distemper Virus

Infection of hosts by morbilliviruses is facilitated by the interaction between viral hemagglutinin (H-protein) and the signaling lymphocytic activation molecule (SLAM). Recently, the functional importance of the n-terminal region of human SLAM as a measles virus receptor was demonstrated. However, the functional roles of this region in the infection process by other morbilliviruses and host range determination remain unknown, partly because this region is highly flexible, which has hampered accurate structure determination of this region by X-ray crystallography. In this study, we analyzed the interaction between the H-protein from canine distemper virus (CDV-H) and SLAMs by a computational chemistry approach. Molecular dynamics simulations and fragment molecular orbital analysis demonstrated that the unique His28 in the N-terminal region of SLAM from Macaca is a key determinant that enables the formation of a stable interaction with CDV-H, providing a basis for CDV infection in Macaca. The computational chemistry approach presented should enable the determination of molecular interactions involving regions of proteins that are difficult to predict from crystal structures because of their high flexibility.     

Application of DEM modified with enlarged particle model to simulation of bead motion in a bead mill

We applied the discrete element method （DEM） of simulation modified by an enlarged particle model to simulate bead motion in a large bead mill. The stainless-steel bead mill has inner diameter of 102 mm and mill length of 198 mm. The bead diameter and filling ratio were fixed respectively at 0.5 mm and 85%. The agitator rotational speed was changed from 1863 to 3261 rpm. The bead motion was monitored experimentally using a high-speed video camera through a transparent mill body. For the simulation, enlarged particle sizes were set as 3-6 mm in diameter. With the DEM modified by the enlarged particle model, the motion of enlarged particles in a mill was simulated.The velocity data of the simulated enlarged particles were compared with those obtained in the experiment. The simulated velocity of the enlarged particles depends on the virtual frictional coefficient in the DEM model. The optimized value of the virtual frictional coefficient can be determined by considering the accumulated mean value. Results show that the velocity of the enlarged particles simulated increases with an increase in the optimum virtual frictional coefficient, but the simulated velocity agrees well with that determined experimentally by optimizing the virtual frictional coefficient in the simulation. The computing time in the simulation decreases with increased particle size.     

Polymerization of optically active disubstituted acetylene monomers by Pd catalyst bearing bulky phosphine ligand

Chloro- and aryl-substituted acetylene monomers having an optically active group were polymerized by a Pd catalyst [(^tBu₃P)PdMeCl] bearing a bulky phosphine ligand, and by MoCl₅ for comparison. The corresponding disubstituted acetylene polymers with M_n's = 2000–19,500 and 6900–10,800 were obtained in 29–83% and 11–62% yields when the Pd and Mo catalysts were used, respectively. The formation of polyacetylenes, poly[(R)- 1p ], poly[(R)- 1m ], and poly[(S)- 2p ] were confirmed by SEC and the presence of a Raman scattering peak based on the alternating double bonds of the main chain. Pd-based poly[(R)- 1m ] exhibited CD signals around 350 nm assignable to a certain secondary structure, while Mo-based poly[(R)- 1m ] did not. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3011–3016     

Improving Data Quality in Traditional Low-Dose Scanning Transmission Electron Microscopy Imaging

It has become very important to study and find optimal conditions for imaging electron-beam (e-beam) sensitive materials in scanning transmission electron microscopy under low electron-dose with high signal-to-noise ratio (SNR). Convergence and collection angles and electron-probe current are essential parameters. However, these parameters have rarely been discussed in a systematic way. In this paper, the illumination and collection conditions are optimized according to the resolution requirement of different materials by adjusting the condenser and intermediate lenses in a commercial transmission electron microscope. To demonstrate the significance of optimizing these parameters, two examples, zeolite MFI and metal–organic framework (MOF) MIL-101, are taken among the sensitive materials, with the most important electron incidences along the [010] and <110> directions, respectively. High SNR atomic resolution images of MFI are obtained with e-beam current as low as 0.50 pA, reaching information transfer for reflection up to 18 0 2 corresponding to d-spacing of 0.11 nm, close to the resolution limit of 0.098 nm from resolvable diffraction limit. MOF MIL-101 is characterized under an even lower e-beam 0.2 pA to avoid severe beam damage. High-quality annular dark and bright field images are obtained, which proves the wide applicability of this method on more e-beam sensitive materials.     

Radiation Crosslinking of Chlorinated Poly(Isobutylene-co-Isoprene) with Polyfunctional Monomers

Abstract

It is well known that poly(isobutylene-co-isoprene) (butyl rubber, IIR) is degraded by irradiation. However, we demonstrated that IIR, after chlorination (CIIR) crosslinks by electron beam (EB) irradiation. The gel dose for CIIR was 3.8 kGy. To avoid scission of the main chain, various polyfunctional monomers were added for crosslinking of CIIR at lower doses. It was found that trimethylolpropane trimethacrylate (TMPT) is the most effective accelerator for crosslinking of CIIR at a lower dose. The tensile strength of EB crosslinked by CIIR increases almost linearly with increasing TMPT content.     

Synthesis and Antibacterial Activity of 3‐(Substituted arylmethyl)‐4‐acylaminomethyloxazolidin‐2‐ones and Derivatization to Symmetrical Twin‐Drug Type Molecules

In connection with our studies on antibacterial active compounds in the class of new oxazolidinones against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Escherichia coli) strains, some molecular modifications were attempted. In this study, molecular modifications of 4‐aminomethyloxazolidin‐2‐ones ( 3a ) to the corresponding 4‐acylaminomethyloxazolidin‐2‐one derivatives ( 3c–d ) and preparations of the represented twin‐drug type molecules ( 10–14 ) were investigated. Some additional 4‐dialkylaminomethyloxazolidin‐2‐ones ( 2 ) were also synthesized. The synthesized compounds were evaluated for antibacterial activity with Gram‐positive (S. aureus) and Gram‐negative (E. coli) strains.     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

False Detection of Cyanide Ion in Photographic Processing Waste Solutions Using Standardized Reference Methods

Abstract

Although cyanide compounds are not incorporated in photographic processing solutions, false detection of cyanide ion is often encountered during the determination of total cyanide by various standardized methods such as ISO, ANSI and JIS. Various organic compounds and nitrogen compounds in the processing solutions were examined because of this false detection. The results suggest that hydrogen cyanide is formed by a reaction between these compounds during the distillation process for the separation of total cyanide, even though ISO, ANSI and JIS were used. The results support the following three mechanisms of cyanide formation involved in the process: (1) Hydroxylammonium salts reacts with another ingredient, formaldehyde, to form formaldoxime, which then decomposes to HCN. (2) Hydroxylammonium is oxidized by air to form nitrite ion, which subsequently reacts with organic compounds such as aminocarboxylic acids and aromatic amines (the colour-developing agent) to form HCN. (3) Potassium permanganate oxidizes aromatic amines to form HCN.