Separation of fulvic acid from soil extracts based on ion-pair formation with a cationic surfactant.

A novel method for separating fulvic acid (FA) from soil extracts is proposed. The FA, defined as the acid-soluble fraction of an alkaline extract of soil, was separated based on the precipitation of an ion-pair with a cationic surfactant, such as domiphen bromide. The precipitate was dissolved in aqueous HCl to produce H+ -type FA and a surfactant chloride (SUR-Cl). SUR-Cl, in the aqueous solution, was removed by extraction with CHCl3. After the aqueous phase was passed through a cation-exchanger (H+ -type), H+ -type FA (FA-SUR) was obtained as a powder by lyophylization. The chemical characteristics of FA-SUR were compared with an FA sample separated according to the method of the International Humic Substances Society using a DAX-8 resin (FA-DAX). The oxygen content, O/C atomic ratio and total acidity of the FA-SUR were significantly larger than the corresponding values for FA-DAX. The solid-state CPMS 13C NMR spectra indicated that the higher oxygen content of the FA-SUR could be due to alcoholic hydroxyl groups and polysaccharides as well as carboxylic groups. These results show that FA-SUR is more polar and hydrophilic than FA-DAX.     

Ion chromatography of nitrite and carbonate in inorganic matrices on an octadecyl—poly(vinyl alcohol) gel column using acidic eluents

Low levels of carbonate and nitrite contained in inorganic matrices were determined by ion chromatography on an Asahipak ODP-50 poly(vinyl alcohol) gel-based reversed-phase column. With an acidic mobile phase, inorganic matrix anions and cations eluted near the void volume of the column, whereas carbonate and nitrite were retained and separated completely from the matrix ions. After the separation column, the peak response was enhanced using a cation-exchange hollow fibre and 25 mM sodium sulphate or alkaline enhancers. Sea-water samples can be applied directly for the determination of carbonate and added nitrite at ppm levels. The maximum sample volume that can be loaded on the column without peak deformation depended on the pH of the sample solution and the sulphuric acid concentration in the eluent. A 50 μl sea-water sample was applicable with a 2.5 mM acid eluent.     

A practical synthesis of 4′-thioribonucleosides

A practical synthesis of 4′-thioribonucleosides starting from inexpensive l-arabinose is described. 1,4-Anhydro-2,3-O-isopropylidene-4-thioribitol, which was prepared by using a novel reductive ring-contraction reaction, was converted to the 5-O-silylated sulfoxides. The Pummerer-type thioglycosylation of the sulfoxides gave the 4′-thioribonucleosides stereoselectively.     

On-line measurement of intramolecular carbon isotope distribution of acetic acid by continuous-flow isotope ratio mass spectrometry

Molecular and intramolecular carbon isotope measurements of acetic acid present in natural environments have been performed by off-line procedures. The off-line method is complicated and time-consuming and requires micromolar to millimolar amounts of sample. This limits geochemical isotopic studies, especially at the intramolecular level, on acetic acid present in natural samples. Here, we examine an on-line measurement of intramolecular carbon isotope distribution of acetic acid using continuous-flow isotope ratio mass spectrometry (CF-IRMS) coupled with an on-line pyrolysis system. This is achieved by measurement of the respective carbon isotope ratios of CH4 and CO2 produced by on-line pyrolysis of acetic acid. Results for authentic standards of pure acetic acid demonstrated the practicality of this on-line method, although the carbon isotope ratio of the methyl group could not be determined directly. The precision of the carbon isotope measurements was 0.4 per thousand (1sigma). The carbon isotope distribution determined by the on-line method was identical to that determined by the conventional off-line method within analytical error. The advantages of the on-line method compared with the conventional off-line method are that it is less laborious, requires less analytical time (less than one hour per sample) and, most importantly, uses smaller sample sizes (ca. 10 nanomole). An application of this on-line method to natural geochemical samples will provide an insight into the geochemical cycle of acetic acid.     

On manifolds having some restricted ideal boundaries

The theory of the ideal boundary has arisen as a method of a study of noncompact manifolds. In this paper we shall investigate properties of manifolds whose ideal boundaries satisfy some conditions related to the Tits metric. In Section 2 we shall consider in what conditions the Tits topology is equivalent to the sphere topology and in Section 3 the property of points at infinity which characterize the R-factor. Furthermore, in Section 4 we shall give a sufficient condition for a projective map to be isometríc.Partially supported by Grant-in-Aid for Encouragement of Young Scientists (No. 01740011), The Ministry of Education, Science and Culture, Japan.     

Biodegradable Polyurethanes from Plant Components

Abstract

Polyurethane (PU) sheets and foams having plant components in their network were prepared by using the following procedure. Polyethylene glycol (PEG) was mixed with one of the following; molasses, lignin, woodmeal, or coffee grounds. The mixture obtained was reacted with diphenylmethane diisocyanate (MDI) at room temperature, and precured PUs were prepared. The precured PUs were heat-pressed and PU sheets were obtained. In order to make PU foam, the above mixture was reacted with MDI after the addition of plasticizer, surfactant (silicone oil), catalyst (di-n-butyltin dilaurate), and droplets of water under vigorous stirring. The glass transition temperature, tensile and compression strengths, and Young's modulus of the PU sheets and foams increased with an increasing amount of plant components. This suggests that saccharide and lignin residues act as hard segments in PUs. It was found that the PUs obtained were biodegradable in soil. The rate of biodegradation of the PUs derived from molasses and coffee grounds was between that of cryptomeria (Cryptomeria japonica) and beech (Fagus sieboldi).     

Synthesis and Antibacterial Activity of 3‐(Substituted arylmethyl)‐4‐acylaminomethyloxazolidin‐2‐ones and Derivatization to Symmetrical Twin‐Drug Type Molecules

In connection with our studies on antibacterial active compounds in the class of new oxazolidinones against Gram‐positive (Staphylococcus aureus) and Gram‐negative (Escherichia coli) strains, some molecular modifications were attempted. In this study, molecular modifications of 4‐aminomethyloxazolidin‐2‐ones ( 3a ) to the corresponding 4‐acylaminomethyloxazolidin‐2‐one derivatives ( 3c–d ) and preparations of the represented twin‐drug type molecules ( 10–14 ) were investigated. Some additional 4‐dialkylaminomethyloxazolidin‐2‐ones ( 2 ) were also synthesized. The synthesized compounds were evaluated for antibacterial activity with Gram‐positive (S. aureus) and Gram‐negative (E. coli) strains.     

Hydrogen-bonded liquid crystals built from hydrogen-bonding donors and acceptors. Infrared study on the stability of the hydrogen bond between carboxylic acid and pyridyl moieties

Abstract

The stability of a hydrogen-bonded complex built through inter-molecular hydrogen bonding between carboxylic acid and pyridine fragments has been examined using infrared spectroscopy. Infrared spectra as a function of temperature have been recorded for the 1:1 complex of 4-hexyloxybenzoic acid and trans-4-propoxy-4′-stilbazole from the crystalline state to the isotropic state. A dependence of the stability of the hydrogen bond on molecular orientation is observed clearly in the infrared spectra. The spectra also suggest that the hydrogen bond is an unionized type with a double minimum potential energy.     

Prediction of anisotropic transport in Nafion containing catalyst layers

Using dissipative particle dynamics we model phase separation within Nafion electrolytes of thickness between 5 and 10 nm containing 20 volume percent water, sandwiched between a carbon catalyst support (CCS) layer and air. The diffusion pathway for protons and water is probed by Monte Carlo trajectory calculations. While varying the interactions between CCS and water, diffusion parallel to the CCS is predicted to be highest and perpendicular diffusion to be lowest for a hydrophilic CCS. This is explained by variations in water density profiles along the perpendicular direction, which act as bottlenecks for diffusion. Increasing the hydrophobic character of the CCS lifts up these bottlenecks.