Analysis of fresco by laser induced breakdown spectroscopy

The laser-based techniques have been shown to be a very powerful tool for artworks characterization and are used in the field of cultural heritage for the offered advantages of minimum invasiveness, in situ applicability and high sensitivity. Laser induced breakdown spectroscopy, in particular, has been applied in this field to many different kinds of ancient materials with successful results. In this work, a fragment of a Roman wall painting from the archaeological area of Pompeii has been investigated by LIBS. The sample elemental composition resulting from LIBS measurements suggested the presence of certain pigments. The ratio of the intensities of different lines related to some characteristic elements is proposed as an indicator for pigment recognition.     

Immobilized TiO<Subscript>2</Subscript> nanoparticles produced by flame spray for photocatalytic water remediation

Anatase/rutile mixed-phase titanium dioxide (TiO₂) photocatalysts in the form of nanostructured powders with different primary particle size, specific surface area, and rutile content were produced from the gas-phase by flame spray pyrolysis (FSP) starting from an organic solution containing titanium (IV) isopropoxide as Ti precursor. Flame spray-produced TiO₂ powders were characterized by means of X-ray diffraction, Raman spectroscopy, and BET measurements. As-prepared powders were mainly composed of anatase crystallites with size ranging from 7 to 15 nm according to the synthesis conditions. TiO₂ powders were embedded in a multilayered fluoropolymeric matrix to immobilize the nanoparticles into freestanding photocatalytic membranes. The photocatalytic activity of the TiO₂-embedded membranes toward the abatement of hydrosoluble organic pollutants was evaluated employing the photodegradation of rhodamine B in aqueous solution as test reaction. The photoabatement rate of best performing membranes significantly overcomes that of membranes produced by the same method and incorporating commercial P25-TiO₂.     

Analysis of elliptically polarized maximally entangled states for bell inequality tests

When elliptically polarized maximally entangled states are considered, i.e., states having a non random phase factor between the two bipartite polarization components, the standard settings used for optimal violation of Bell inequalities are no longer adapted. One way to retrieve the maximal amount of violation is to compensate for this phase while keeping the standard Bell inequality analysis settings. We propose in this paper a general theoretical approach that allows determining and adjusting the phase of elliptically polarized maximally entangled states in order to optimize the violation of Bell inequalities. The formalism is also applied to several suggested experimental phase compensation schemes. In order to emphasize the simplicity and relevance of our approach, we also describe an experimental implementation using a standard Soleil-Babinet phase compensator. This device is employed to correct the phase that appears in the maximally entangled state generated from a type-II nonlinear photon-pair source after the photons are created and distributed over fiber channels.     

Comparative study of different types of graphenes as electrocatalysts for ascorbic acid

A comparative study regarding the electrocatalytic activity of graphene oxide (GO), chemically-reduced graphene oxide (crGO) and graphene produced by direct liquid exfoliation (dG) is presented. Sensors were developed by modifying glassy carbon (GC) electrodes with GO, crGO and dG and ascorbic acid was used as a pilot analyte. GC/GO electrodes offer substantially lower oxidation overpotential, up to 350 mV, compared with GC/crGO, GC/dG and unmodified GC electrodes. In addition, the different carbon-to-oxygen atomic ratios in GO, as it occurs depending on the synthetic route, were found to have a remarkable effect on the performance of the sensors. Reduction of GO was achieved by immersing the modified electrodes into a stirred solution of NaBH₄ for 10 min at room temperature. This process was used alternatively of the time consuming and laborious process of hydrazine, and its effectiveness was confirmed by cyclic voltammetry and electrochemical impedance spectroscopy. Analytical utility of the sensors is demonstrated.     

Synthesis of block copolymer segments containing different ratios of ethylene and 5-norbornen-2-yl acetate

Block copolymerization of ethylene with 5-norbornen-2-yl acetate (1) by the nickel catalyst system [N-(2,6-diisopropylphenyl)-2-(2,6-diisopropylphenylimino)propanamide]Ni(eta1-CH2Ph)(PMe3) (2) and Ni(COD)2 (bis(1,4-cyclooctadiene)nickel) (3) produces a variety of block copolymer structures that demonstrate microphase separation. Typical block copolymerizations were carried out in an autoclave charged with a solution of the catalyst mixture and 1 (0.15 M) in toluene. The autoclave was sealed and exposed to PC2H4 = 50 psi for a period of time (T1). A pressure jump to PC2H4 = 1100 psi was then applied and the reaction allowed to proceed for another predetermined interval (T2). Independent experiments were performed to isolate and examine the molecular weight and comonomer composition of the first block. Narrow molecular weight distributions and the increase of polymer molecular weight with increases in T1 or T2 are consistent with a product in which an initial block is formed at low ethylene pressures and quantitatively converted to a block copolymer by the jump to high pressure. Transmission electron microscopy confirms that the materials are microphase separated.     

Effects of photoactivated titanium dioxide nanopowders and coating on planktonic and biofilm growth of Pseudomonas aeruginosa

We exploited the ability of photocatalytic titanium dioxide (TiO(2)) as an agent for the biofilm control. Two photocatalytic systems were investigated: a 3 g L(-1) suspension of TiO(2) nanopowder in demineralized water and glass slides coated with a TiO(2) thin film, achieved by sol-gel deposition. A running protocol for the photoactivation of TiO(2) was set up using the dye rhodamine B. The microorganisms studied were Pseudomonas stutzeri, Pseudomonas aeruginosa and a Bacillus cereus-group as planktonic cells. P. aeruginosa biofilms were also studied at both the solid-liquid and the solid-air interface. The TiO(2) nanopowder produced 1-log reduction of Bacillus sp. planktonic cells in 24 h, 2-log reduction of P. stutzeri planktonic cells in 30 min and 1-log reduction of P. aeruginosa planktonic cells in 2 h compared with non-photo-activated TiO(2). TiO(2) thin film produced almost a complete eradication of P. aeruginosa planktonic cells (initial concentration 10(8) cells mL(-1)) in 24 h compared to a 3-log reduction caused by UV-A light alone. In contrast, neither the photocatalytic treatment with TiO(2) film nor that with TiO(2) nanopowder had any effect on P. aeruginosa biofilms at all the interfaces investigated. Possible explanations for these findings, and for the discrepancy between this work and literature data, are discussed.     

Pseudo-tetrablock copolymers with ethylene and a functionalized comonomer

Pseudo-tetrablock copolymers comprised of ethylene and 5-norbomen-2-yl acetate (1), were synthesized using the initiator system (L(i)Pr2)Ni(eta1-CH2Ph)(PMe3)(2)[(L(i)Pr2) = N-(2,6-diisopropylphenyl)-2-(2,6-diisopropylphenylimino)propanamide] and 2.5 equivalents of Ni(COD)2 [bis(1,5-cyclooctadiene) nickel.     

Nanohybrids based on polymeric ionic liquid prepared from functionalized MWCNTs by modification of anionically synthesized poly(4‐vinylpyridine)

We report the synthesis of a composite material comprised of poly(4‐vinylpyridine) (P4VP) grafted on multiwall carbon nanotubes (MWCNTs) and the preparation of a nanohybrid via quaternization of the nitrogen atom per monomeric unit of the polymer chains. 4‐Vinylpyridine was polymerized anionically using high vacuum techniques and was reacted with MWCNTs under vacuum to be grafted on the polymer segments. The composite material was soluble in common solvents and the dispersion of the carbon nanotubes was improved after quaternization due to the formation of polymeric ionic liquid (PIL) of the MWCNTs‐g‐[P4VP‐r‐poly(4ViEtPy⁺Br^‐)] type. The successful synthesis was confirmed with Fourier‐transform infrared and Raman spectroscopies, whereas differential scanning calorimetry was adopted to verify the stability of the polymer's glass transition temperature before and after grafting on the MWCNTs. Moreover, thermogravimetric analysis was used for examining the thermal stability and the PIL formation of the composite. Energy dispersive spectroscopy measurements confirm the precipitation of silver bromide when the MWCNTs‐g‐[P4VP‐r‐poly(4ViEtPy⁺Br^‐)] is reacted with silver nitrite indicating the successful quaternization and formation of the appropriate PIL. High temperature size exclusion chromatography was used for the determination of the molecular characteristics (average molecular weight by number $\overline M _n$ , polydispersity I) of the homopolymer obtained from the filtration of the composite material. Finally, field‐emission scanning electron microscopy was used to verify the successful grafting of the polymer to the MWCNTs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Carbon nanotube growth on high modulus carbon fibres: Morphological and interfacial characterization

Carbon nanotubes (CNTs) were grown directly on the surface of carbon fibres, using the catalytic chemical vapour deposition. FeCo bimetallic catalysts were deposited on carbon fibres using a simple wet impregnation method. CNTs were synthesized over the prepared catalysts by the catalytic decomposition of acetylene at 750^oC. The uniform CNT formation on the fibre surface was verified using scanning electron microscopy. Raman spectroscopy was employed to evaluate non‐destructively the CNT growth and the CNT quality. Thermo gravimetric analysis and differential thermal analysis were employed as destructive methods to confirm the spectroscopic data. Single CNT‐coated fibre fragmentation tests were performed to examine the interfacial shear strength (ISS) of the modified fibres. Acoustic emission was employed to monitor the fragmentation process in real time. Thus, the coated fibre structural integrity was assessed together with its stress transfer properties. Polarized optical microscopy was employed to cross validate the acoustic emission data. It was found that the ISS of the nanotube‐reinforced interphase was improved without affecting the fibre mechanical properties. Copyright © 2013 John Wiley & Sons, Ltd.     

1.5 microm photon-counting optical time-domain reflectometry with a single-photon detector based on upconversion in a periodically poled lithium niobate waveguide

Optical time-domain reflectometry (OTDR) is one of the most powerful tools in the characterization of optical fiber links. We demonstrate a photon-counting OTDR system at 1.5 microm with a single-photon detector, which combines frequency upconversion in a periodically poled lithium niobate waveguide and a silicon avalanche photodiode. The system exhibits high sensitivity, good spatial resolution, and short measurement time.