A comparative study of HPLC-UV and UPLC-DAD methods for simultaneous estimation of aspirin and cilostazol in the presence of their related impurities in bulk and capsules

Aspirin (ASP) and cilostazol (CST) are used as a combination in pharmaceutical formulations for treatment of strokes. Salicylic acid (SAL) is considered to be one of the main synthesis impurities and a degradation product of ASP. On the other hand, the main related impurities of CST are CST related A, B, and C (CST-RA, CST-RB, and CST-RC), respectively. Furthermore, as high efficiency and less elution are the basic requirements of high-speed chromatographic separation, so, a comparative study of two simple, precise, and accurate reversed-phase HPLC and UPLC methods was developed and validated for simultaneous estimation of ASP and CST in bulk and capsules in the presence of SAL, CST-RA, CST-RB, and CST-RC. A Eurospher II C18 (250?×?4.6?mm², 5?µm) for HPLC method and an Agilent Zorbax Eclipse Plus C18 (50?×?2.1?mm², 1.8?µm) for UPLC method were used. A gradient mobile phase of 20?mM anhydrous KH₂PO₄ buffer solution (containing 0.2% triethylamine (TEA), v/v) with pH adjusted to 2.9 using orthophosphoric acid (solution A) and acetonitrile (solution B) mixed in different proportions for HPLC and UPLC methods was prepared. Flow rate was set to 1.0 and 0.3?mL min^?1 for HPLC and UPLC methods, respectively, and the detection was performed for both methods at 210?nm. It worth noting that the proposed UPLC-DAD assay exhibited relatively much more precision, sensitivity, specificity, and economic and chromatographic separation superiority than proposed HPLC-UV assay. Both developed methods were compared with reference methods to prove its applicability and are suitable for purity assessment of ASP and CST in bulk and capsules.     

Ion-Pair LC Method for Simultaneous Determination of Aliskiren Hemifumarate,Amlodipine Besylate and Hydrochlorothiazide in Pharmaceuticals

A rapid and precise LC method was developed for the simultaneous determination of aliskiren hemifumarate (ALS), amlodipine besylate (AML) and hydrochlorothiazide (HCZ) using acetonitrile:25 mM octane sulfonic acid sodium salt monohydrate in water (60:40 v/v) as the mobile phase. The flow rate was maintained at 1.2 mL min^?1 on a stationary phase composed of Supelco, Discovery^® HS (C18) column (25 cm × 4.6 mm, 5 μm). Isocratic elution was applied throughout the analysis. Detection was carried out at λ _max (232 nm) at ambient temperature. The method was validated according to ICH guidelines. Linearity, accuracy and precision were satisfactory over the concentration ranges of 32–320, 2–44 and 4–64 μg mL^?1 for ALS, AML and HCZ, respectively. LOD and LOQ were estimated and found to be 0.855 and 2.951 μg mL^?1, respectively, for ALS, 0.061 and 0.202 μg mL^?1, respectively, for AML as well as 0.052 and 0.174 μg mL^?1, respectively, for HCZ. The method was successfully applied for the determination of the three drugs in their co-formulated tablets. The results were compared statistically with reference methods and no significant difference was found. The developed method is specific and accurate for the quality control and routine analysis of the cited drugs in pharmaceutical preparations.     

Validated spectrophotometric methods for the simultaneous determination of ciprofloxacin hydrochloride and metronidazole in tablets

A binary mixture of ciprofloxacin hydrochloride (CIP) and metronidazole (MET) was determined by five simple and accurate methods, without prior separation. In the first method, CIP was determined by second derivative spectrophotometric method ((2)D) by measuring the amplitude at 282 nm (zero ordinate value of MET). On the other hand, the determination of MET was based on isosbestic point technique, where the total content of the mixture was determined at 294.5 nm (isosbestic point), then the content of MET could be calculated by subtraction. The second method was first derivative ratio spectrophotometric method ((1)DD) where the total amplitude at 261 and 285 nm and the amplitude at 295.5 nm were selected to simultaneously determine CIP and MET in binary mixture, respectively. The third method was based on dual wavelength analysis, in which two wavelengths were selected, at which the absorbances of the other component were the same. The fourth method depends on using Q-analysis method (absorbance ratio) which involves the formation of Q-absorbance equation using the respective absorptivity values at 294.5 nm (isosbestic point) and 281.5 nm (λ(max) of CIP). The fifth method is partial least-squares (PLS) chemometric technique for determination of CIP and MET. The developed methods were successfully applied to the analysis of CIP and MET in laboratory prepared mixtures and tablets with good recoveries and their validation was carried out following the International Conference on Harmonization (ICH) guidelines. The results obtained were statistically compared with each other showing no significant difference with respect to accuracy and precision.     

Phthalazine-1,4-dione derivatives as non-competitive AMPA receptor antagonists: design,synthesis, anticonvulsant evaluation,ADMET profile and molecular docking

Molecular Diversity - In view of the anticonvulsant activity reported for phthalazine derivatives as non-competitive AMPA receptor antagonists, a new series of phthalazine-1,4-diones (2–12)...     

Development and Validation of Chromatographic Methods for the Quantification of Dabigatran Etexilate Mesylate in the Presence of Its Risky Degradation Products

JPC – Journal of Planar Chromatography – Modern TLC - New stability-indicating thin-layer chromatography (TLC)—densitometry and reversed-phase liquid chromatography (RP-LC)...     

Simultaneous determination of diclofenac potassium and methocarbamol in ternary mixture with guaifenesin by reversed phase liquid chromatography

New, simple, rapid and precise reversed phase liquid chromatographic (RP-LC) method has been developed for the simultaneous determination of diclofenac potassium (DP) and methocarbamol (MT) in ternary mixture with guaifenesin (GF), degradation product of methocarbamol. Chromatographic separation was achieved on a Symmetry^® Waters C18 column (150 mm × 4.6 mm, 5 μm). Gradient elution based on phosphate buffer pH (8)-acetonitrile at a flow rate of 1 mL min⁻¹ was applied. The UV detector was operated at 282 nm for DP and 274 nm for MT and GF. Linearity, accuracy and precision were found to be acceptable over the concentration ranges of 0.05-16, 0.5-160 and 0.5-160 μg mL⁻¹ for DP, MT and GF, respectively. The optimized method proved to be specific, robust and accurate for the quality control of the cited drugs in pharmaceutical preparation.     

New information on Mössbauer and phase transition properties of Z‐type hexaferrites

In this paper various cation substituted Z‐hexaferrites, prepared by the usual ceramic procedure and firing at a relatively low temperature (980^○C) in a 2 atm. oxygen pressure are discussed. On these materials extensive studies were undertaken, X‐ray diffraction, IR absorption, scanning electronmicroscopy and a Mössbauer spectroscopy. Data obtained are explained, and discussed in details, leading to new information about the interaction of variant doped cation with the Z‐hexaferrite Fe sites.     

Copper mining and mill analyses by γ-rays from capture of californium-252 neutrons

Copper mill materials from Utah and Nevada and rock cores from a geothermal drill hole at the Valies Grande Caldera in New Mexico were irradiated at the Los Alamos Scientific Laboratory with neutrons from a californium-252 source (about 10¹⁰ n s^-1), and the capture γ-rays were measured. The copper response, based on the 6.89-MeV double escape line, agreed sufficiently well with the known chemical composition of the materials to indicate usefulness of this technique for exploring copper deposits and for monitoring metallurgical extraction processes.