Generalized fractional maximal and integral operators on Orlicz and generalized Orlicz–Morrey spaces of the third kind

Positivity - In the present paper, we will characterize the boundedness of the generalized fractional integral operators $$I_{\rho }$$ and the generalized fractional maximal operators $$M_{\rho }$$...     

A divergent synthesis of dihydropyridazinones,N‐substituted dihydropyrazoles,and O‐substituted pyrazoles

Dihydropyridazinones 4a , 4b , N‐substituted dihydropyrazoles 5b , 5c , 5d , and O‐substituted pyrazoles 6a , 6b , 6c , 6d have been synthesized starting from spirocyclopropanepyrazole derivative 2 . Treatment of 2 with α‐chloro esters, e.g., methyl chloroacetate, ethyl chloroacetate, isopropyl chloroacetate, and tert‐butyl chloroacetate, in potassium carbonate/sodium iodide system caused ring opening and subsequent C‐ or N‐attack nucleophilic substitution to give the corresponding dihydropyridazinones 4a , 4b and N‐substituted dihydropyrazoles 5b , 5c , 5d . On the other hand, in the absence of sodium iodide, O‐substituted pyrazoles 6a , 6b , 6c , 6d were obtained from 2 via an O‐attack nucleophilic substitution. J. Heterocyclic Chem., 2011.     

Optimization of SIMS analytical parameters for water content measurement of olivine

Secondary ion mass spectrometry (SIMS) has a wide range of applications in Earth Science research, thanks to its high precision and sensitivity, and its capacity in direct insitu micromeasurement. The technique is operated in ultra-high vacuum (UHV) conditions, especially for the measurement of volatiles such as hydrogen, or the water content in nominally anhydrous minerals (NAMs). To minimize the water background and obtain accurate and precise water contents in NAMs (eg, olivine) critical parameters such as presputtering time, field aperture (FA), dynamic transfer on/off, and primary beam current intensity were investigated for a CAMECA IMS 1280-HR system. When the chamber vacuum reaches approximately 2 × 10⁻⁹ mbar, we set the DTOS OFF, raster size to 50 μm and primary beam current to 5 nA, and used 2000 μm FA and 170-second presputtering time. Consequently, an approximately 1.2 ppmw water background and 3.6 ppmw limit of detection (LOD) were yielded, from analyzing the San Carlos olivine. Meanwhile, the water content and homogeneity of a range of olivine minerals were characterized for potential use as reference materials for SIMS water content measurement. Olivine water content calibration curve was also established by comparing the Fourier transform infrared (FTIR) results with the SIMS-measured ¹⁶O¹H⁻/¹⁶O⁻ ratios. Accuracy and precision of water content measurement were estimated to be better than approximately 10% in this study.     

Synthesis,Crystal Packing,and Ambipolar Carrier Transport Property of Twisted Dibenzo[g,p]chrysenes

A versatile method for the synthesis of dibenzo[g,p]chrysene (DBC) derivatives based on regio‐ and stereoselective stannyllithiation to diarylacetylenes is described. This method affords a variety of DBCs possessing both electron‐donating and electron‐withdrawing functional groups. These twisted molecules take brickwork packing structures in single crystals. Thus, ambipolar carrier transport properties with mobility values of up to 10^?3 cm² V^?1 s^?1 in the amorphous state were achieved. Functional groups on DBC frameworks are considered to increase carrier mobility through the enhancement of intermolecular interactions in the brickwork packing structures.     

Novel conducting fabric polymer composites as stretchable electrodes: one‐step fabrication of chemical actuators

Composite films have functioned as chemical bending actuators, where stretchable conducting fabrics were joined to both surfaces of ionomer films. This phenomenon shows that a direct metallization of either electroless or electrolytic plating having a metal dendrite formation on the ionomer film is not essential for functioning as actuators. Conducting fabric polymer composite (CFPC) actuators can be easily fabricated by a simple adhesion process using flexible conducting fabrics as electrodes. Due to their excellent contraction and expansion capabilities, gold‐ and copper‐plated knitted fabrics were employed and stably bound to Nafion‐117 film. Au‐CFPC actuators demonstrated a maximum bending displacement of ±2.5 mm at ±2 V. Cu‐CFPC gave a smaller displacement of ±0.7 mm at ±2 V, having no reverse displacement. The method described here is widely applicable, introducing conducting layers on various flexible, stretchable, and polymer substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Quantitative Detection for Porphyromonas gingivalis in Tooth Pocket and Saliva by Portable Electrochemical DNA Sensor Linked with PCR

Here, a quantitative electrochemical analysis of periodontal bacteria in gingival crevicular fluid (GCF) and saliva by direct polymerase chain reaction (PCR) is presented. The electrochemical measurement was performed by mixing with PCR products and electrochemical indicator (bisbenzimidazole trihydrochloride). The peak current of indicator is reduced due to slower diffusion when the dye intercalates into the amplified DNA, and the degree of reduction in the peak current is correlates with the quantity of amplified DNA. Therefore, a quantitative analysis is possible by using our electrochemical method at the end point of PCR. In the GCF testing, The number of Porphyromonas gingivalis (Pg) detected by our electrochemical method at the end point of PCR were almost same compared with that were calculated by the conventional method of quantitative real? time PCR. In the saliva testing, the relationship between number of Pg in saliva and average pocket depth, and age‐dependence were also clearly observed. Since the saliva sample is obtained in a non‐invasive manner, this method is useful for the primary screening of periodontal disease. Moreover, our detection method is simple and uses a hand‐held potentiostat making it suitable for development of an on‐site periodontal diagnosis system.     

Kinetics of the Copolymerization of Methyl Vinyl Ketone and Acrylamide Initiated by the Adduct of Methyl Vinyl Ketone and Imidazole

N-(Butyl-3-one)imidazole acts as an initiating adduct which is formed in the anionic polymerization of methyl vinyl ketone (MVK) induced by imidazole (Im) and is directly formed from Im and the MVK monomer. The kinetics of the anionic homopolymerization of MVK and acrylamide (AAm) under argon in the presence of the adduct were investigated in tetrahydrofuran (THF). The rate of polymerization for the MVK system is expressed as R_p = k[Adduct] [MVK], where k = 3.1 × 10^?6 L/(mol·s)in THF at 30°C. The overall activation energy, E_a , was found to be 5.34 kcal/mol. The R_p for the AAm system is expressed as R_p = k[Adduct] [AAm], where k = 6.8 × 10^?6 L/(mol·s) in THF at 30°C, with E_a 7.78 kcal/mol. The mechanism of the polymerization induced by the initiator adduct is discussed on the basis of these results.     

Effects of Bis(aromatic) Pendants on Recognition of Nucleobase Thymine by Zn2+ -1,4,7,10-tetraazacyclododecane (Zn2+ -cyclen)

We have previously shown that the nucleobase thymine binding to Zn²⁺ -cyclen (cyclen=1,4,7,10-tetraazacyclododecane) complex became stronger by appending acridine, naphthalene, or quinoline rings to the cyclen. Amongst these, the pendant bis((1-naphthyl)methyl) or bis((4-quinolyl)methyl) groups yielded the most effective thymine-recognizing Zn²⁺ -cyclen complexes [J. Am. Chem. Soc., 121 (1999) 5426]. The present study was undertaken to find causes of the bis(aromatic) ring effect by X-ray crystal structure analysis and NMR studies. The crystal structure of the Zn²⁺ -bis((1-naphthyl)methyl)-cyclen complex with a deprotonated 1-methylthymine (1-MeT) failed to show the anticipated evidence for the double ~ - ~ stacking interactions between the two naphthalenes and the Zn 2+ -bound 1-MeT m (1-MeT m =N(3')-deprotonated 1-MeT). Crystal data: formula C₃₆ H₄₇ N₇ O₇ Zn, M r =755.19, monoclinic, space group P2₁/ c (No. 14), a =15.438(2) Å, b =14.093(3) Å, c =16.726(2) Å, g =90.53(1) V =3638.7(8) Å 3 Z =4, R =0.035, R _w =0.049. However, the ¹H NMR studies of Zn²⁼ -bis((4-quinolyl)methyl)-cyclen with 1-MeT in varying H₂O/CH₃ CN solution showed increasing upfield shifts of Me(5') and H(6') of the Zn²⁺ -bound 1-MeT in more aqueous media, indicating that the double intercalation with the two quinolines became more significant in more protic environments. We conclude that the double ~ - ~ stacking effect accounts for the enhanced recognition of thymine base by the appended bis((1-naphthyl)methyl) or bis((4-quinolinyl)methyl) groups.