Correction to: Tuning working potential of silicon‑phosphorus anode via microstructure control for high‑energy lithium‑ion batteries

Journal of Solid State Electrochemistry -     

Phenotyping of CYP450 in human liver microsomes using the cocktail approach

The cocktail approach is an advantageous strategy used to monitor the activities of several cytochromes P450 (CYPs) in a single test to increase the throughput of in vitro phenotyping studies. In this study, a cocktail mixture was developed with eight CYP-specific probe substrates to simultaneously evaluate the activity of the most important CYPs, namely, CYP1A2, CYP2A6, CYP2B6, CYP2C9, CYP2C19, CYP2D6, CYP2E1, and the CYP3A subfamily. After cocktail incubation in the presence of human liver microsomes (HLMs), the eight selected substrates and their specific metabolites were analyzed by ultra-high-pressure liquid chromatography and electrospray ionization quadrupole time-of-flight mass spectrometry. Qualitative and quantitative data were simultaneously acquired to produce an overview of the extended phase I biotransformation routes for each probe substrate in the HLMs and to generate phenotypic profiles of various HLMs. A comparison of the cocktail strategy with an individual substrate assay for each CYP produced similar results. Moreover, the cocktail was tested on HLMs with different allelic variants and/or in the presence of selective inhibitors. The results were in agreement with the genetic polymorphisms of the CYPs and the expected effect of the alterations. All of these experiments confirmed the reliability of this cocktail assay for phenotyping of the microsomal CYPs.     

Two-dimensional liquid chromatography–ion trap mass spectrometry for the simultaneous determination of ketorolac enantiomers and paracetamol in human plasma: Application to a pharmacokinetic study

A bioanalytical method was developed for the simultaneous determination of paracetamol and ketorolac enantiomers in human plasma using two-dimensional liquid chromatography–mass spectrometry. Separation was first achieved in a reversed-phase C18 column by using a gradient solvent system consisting of 0.1% aqueous formic acid and acetonitrile (ACN). The effluent between 8.9 and 9.9 min, corresponding to phenacetin and racemic ketorolac peaks, was transferred to a polysaccharide-based chiral column (ChiralPak AD-RH) by using a six-port switching valve. Ketorolac enantiomers were subsequently separated on the chiral column using an isocratic mobile phase composed of ACN/0.1% formic acid 50:50 (v/v). The total run-time was less than 18 min. This innovative strategy prolongs the lifetime of chiral columns by avoiding damages due to the sample matrix. The detection was carried out with an ion trap mass spectrometer equipped with an electrospray ionisation source. The tested ranges were 0.05–20 μg/ml for paracetamol and 0.005–2 μg/ml for each ketorolac enantiomer. This method was fully validated and showed good performances in terms of trueness (80–110%) and precision (6.7–13.2%). The mean extraction recoveries were 60%, 72% and 76% for paracetamol, R-ketorolac and S-ketorolac, respectively. Finally, this procedure was successfully applied to a pharmacokinetic study.     

Experimental design for enantioselective separation of celiprolol by capillary electrophoresis using sulfated beta-cyclodextrin

A capillary zone electrophoresis method was developed for the enantioseparation of celiprolol enantiomers, using a sulfated beta-cyclodextrin (beta-CD) as a chiral selector. The use of a coated capillary was necessary to achieve stable and reproducible enantioseparations. A central composite design was applied to optimize the method and four parameters were selected for this study: the buffer pH, the buffer concentration, the sulfated beta-CD concentration and the temperature. Resolution between celiprolol enantiomers as well as analysis time and generated current were established as responses. For each response, a model was obtained by a second-degree mathematical expression. From the models, the most favorable conditions were determined by optimizing the resolution between celiprolol enantiomers and by setting the two other responses at threshold values. Response surfaces were also used to assess the robustness of the analytical method around the optimal region. Successful results were obtained with a 52 mM acetate buffer at pH 4.0 in the presence of 3.0 mM sulfated beta-CD at a temperature of 19.5 degrees C. Under these optimized conditions, baseline separation of the celiprolol enantiomers was achieved in less than 10 min. The method showed good validation data in terms of precision, accuracy and linearity, and was found to be suitable in determining celiprolol enantiomers in pharmaceutical preparations and in biological fluids.     

Partial solubility parameters of lactose, mannitol and saccharose using the modified extended Hansen method and evaporation light scattering detection

The modified extended Hansen method was tested for the first time to determine partial solubility parameters of non-polymeric pharmaceutical excipients. The method was formerly tested with drug molecules, and is based upon a regression analysis of the logarithm of the mole fraction solubility of the solute against the partial solubility parameters of a series of solvents of different chemical classes. Two monosaccharides and one disaccharide (lactose monohydrate, saccharose and mannitol) were chosen. The solubility of these compounds was determined in a series of solvents ranging from nonpolar to polar and covering a wide range of the solubility parameter scale. Sugars do not absorb at the UV-vis region, and the saturated solutions were assayed with a recent chromatographic technique coupled to an evaporative light scattering detector. This technique was suitable to determine the concentration dissolved in most solvents. The modified extended Hansen method provided better results than the original approach. The best model was the four parameter equation, which includes the dispersion delta d, dipolar delta p, acidic delta a and basic delta b partial solubility parameters. The partial solubility parameters obtained, expressed as MPa1/2, were delta d = 17.6, delta p = 28.7, delta h = 19, delta a = 14.5, delta b = 12.4, delta T = 32.8 for lactose, delta d = 16.2, delta p = 24.5, delta h = 14.6, delta a = 8.7, delta b = 12.2, delta T = 32.8 for mannitol and delta d = 17.1, delta p = 18.5, delta h = 13, delta a = 11.3, delta b = 7.6, delta T = 28.4 for saccharose. The high total solubility parameters delta T obtained agree with the polar nature of the sugars. The dispersion parameters delta d are quite similar for the three sugars indicating that the polar delta p and hydrogen bonding parameters (delta h, delta a, delta b) are responsible for the variation in the total solubility parameters delta T obtained, as also found for drugs. The results suggest that the method could be extended to determine the partial solubility parameters of other non-polymeric pharmaceutical excipients.     

Tuning working potential of silicon-phosphorus anode via microstructure control for high-energy lithium-ion batteries

Journal of Solid State Electrochemistry - The primary research on anode materials of lithium-ion batteries have been focused on increasing the specific capacity, while the working potential that is...     

Simultaneous analysis of polyhydroxylated alkaloids by capillary electrophoresis using borate complexation and evaluation of sweeping technique for sensitivity improvement

Summary Capillary zone electrophoresis coupled to UV detection was used for the simultaneous analysis of naturally occurring polyhydroxylated alkaloids. This separation was based on anin-situ complexation with borate ions. The effect of parameters such as borate concentration, capillary temperature and analyte molecular structure on migration times and selectivity were discussed. The best separation was obtained with a fused silica capillary (48.5 cm total length ×50 μm I.D., with a bubble factor of 3), 80 mM sodium tetraborate aqueous solution at pH 9.2 and temperature of 20°C. The method was validated and showed good data in terms of migration time and peak area reproducibility, selectivity, linearity and accuracy. The validated method was applied to determine miglitol in commercially available pharmaceutical tablets. To further improve method sensitivity, a sweeping technique involving borate ions was evaluated. This technique was found very sensitive to the analyte complexation with borate, borate concentration, and temperature as well as sample matrix. In the case of miglitol, a 35-fold improvement in peak height was achieved.