Ionothermal synthesis and crystal structures of metal phosphate chains

We have prepared isostructural aluminium and gallium phosphate chains by ionothermal reactions in 1-ethyl-3-methylimidazolium bromide and 1-ethylpyridinium bromide under a variety of conditions. The chains can be prepared as pure phases or along with three dimensional framework phases. The chains are favoured at shorter heating times and the crystallinity can be improved by addition of transition metal acetates and amines which are not included in the final structure. The chain can be prepared with or without the presence of hydrofluoric acid.     

Structure and Polymorphism of M(thd)3 (M = Al,Cr, Mn,Fe, Co,Ga, and In)

Formation, crystal structure, polymorphism, and transition between polymorphs are reported for M(thd)₃, (M = Al, Cr, Mn, Fe, Co, Ga, and In) [(thd)^– = anion of H(thd) = C₁₁H₂₀O₂ = 2, 2, 6, 6‐tetramethylheptane‐3, 5‐dione]. Fresh crystal‐structure data are provided for monoclinic polymorphs of Al(thd)₃, Ga(thd)₃, and In(thd)₃. Apart from adjustment of the M–O_k bond length, the structural characteristics of M(thd)₃ complexes remain essentially unaffected by change of M. Analysis of the M–O_k, O_k–C_k, and C_k–C_k distances support the notion that the M–O_k–C_k–C_k–C_k–O_k– ring forms a heterocyclic unit with σ and π contributions to the bonds. Tentative assessments according to the bond‐valence or bond‐order scheme suggest that the strengths of the σ bonds are approximately equal for the M–O_k, O_k–C_k, and C_k–C_k bonds, whereas the π component of the M–O_k bonds is small compared with those for the O_k–C_k, and C_k–C_k bonds. The contours of a pattern for the occurrence of M(thd)₃ polymorphs suggest that polymorphs with structures of orthorhombic or higher symmetry are favored on crystallization from the vapor phase (viz. sublimation). Monoclinic polymorphs prefer crystallization from solution at temperatures closer to ambient. Each of the M(thd)₃ complexes subject to this study exhibits three or more polymorphs (further variants are likely to emerge consequent on systematic exploration of the crystallization conditions). High‐temperature powder X‐ray diffraction shows that the monoclinic polymorphs convert irreversibly to the corresponding rotational disordered orthorhombic variant above some 100–150 °C (depending on M). The orthorhombic variant is in turn transformed into polymorphs of tetragonal and cubic symmetry before entering the molten state. These findings are discussed in light of the current conceptions of rotational disorder in molecular crystals.     

The role of added water in the ionothermal synthesis of microporous aluminium phosphates

Water plays an important role in ionothermal synthesis and it has been suggested that it can influence phase selection. We have carried out an extensive study to determine the phases produced at various ratios of water to ionic liquid in the microwave assisted ionothermal synthesis of fluorinated aluminium phosphate frameworks using 1-ethyl-3-methylimidazolium bromide and 1-ethylpyridinium bromide. Aluminophosphate chabazite is the main product under ionothermal conditions while at increased levels of water the ionic liquids appear to be poor templates with dense phases predominating. The low synthesis pressure in ionothermal reactions is demonstrated and the role of template breakdown in phase selection is also discussed.     

Effect of Pr-Ca substitution on the transport and magnetic behavior of LaMnO3 perovskite

The effect of simultaneous substitution of a fluctuating cation and a divalent cation in LaMnO₃ perovskite modifies the properties of the material to exhibit large valence colossal magnetoresistance (CMR) effect. A good example of these properties is (La_1−2x Pr _x Ca _x )MnO₃ (LPCMO) type CMR material. In this communication it is reported that, with the increase in x (for x=0.1, 0.15, 0.2), the T _c varies between 100 and 120 K with improvisation in metal-insulator transition. Interestingly, resistance increases with x from few hundred ohms to few kilo ohms with corresponding decrease in the unit cell volume. The results of the studies using X-ray diffraction (XRD), electrical resistivity, magnetoresistance and ac susceptibility measurements on LPCMO samples for understanding the structural, transport and magnetic properties are discussed in detail.     

Synthesis and Crystal Structure of [Cr(thd)2(OEt)]2

The mixed‐ligand complex [Cr(thd)₂(OEt)]₂ [(thd)^– = anion of H(thd) = C₁₁H₂₀O₂ = 2,2,6,6‐tetramethylheptane‐3,5‐dione] appears as by‐product when EtOH/H₂O is used as solvent during preparation of Cr(thd)₃. [Cr(thd)₂(OEt)]₂ can be difficult to separate from Cr(thd)₃ by sublimation, but separation is easily accomplished by extracting Cr(thd)₃ with acetone. A detailed account for the sublimation behavior of [Cr(thd)₂(OEt)]₂/Cr(thd)₃ mixtures is advanced. Good yields of [Cr(thd)₂(OEt)]₂ are obtained when CrCl₃, H(thd), and Na(EtO) react in absolute EtOH. [Cr(thd)₂(OEt)]₂ is obtained in the form of green needle‐shaped crystals by recrystallization from toluene. The crystal structure is triclinic [a = 10.2919(15), b = 10.6686(16), c = 14.194(3) Å, α = 106.559(2), β = 107.869(2), and γ = 98.326(2)° at 295 K; space group P . The complex contains two crystallographic equivalent chromium atoms, which are bridged by two cis‐configured ethoxy groups, the four remaining sites in the octahedral coordination around each chromium atom being occupied by oxygen atoms from two thd ligands. The bond lengths and angles concur with the findings for related molecular complexes. The temperature dependence of the magnetic susceptibility of [Cr(thd)₂(OEt)]₂ follows Curie–Weiss law with Weiss constant θ ≈? –65 K and μ_p = 3.87 μ_B.     

The application of an in vitro gastrointestinal extraction to assess the oral bioaccessibility of polycyclic aromatic hydrocarbons in soils from a former industrial site

The total and bioaccessible concentration of 16 polycyclic aromatic hydrocarbons (PAHs) in soil from a former industrial site was investigated. Typical total concentrations across the sampling sites ranged from 1.5 mg kg⁻¹ for acenaphthylene up to 243 mg kg⁻¹ for fluoranthene. The oral bioaccessibility of PAHs in soil was assessed using an in vitro gastrointestinal extraction (Fed Organic Estimation human Simulation Test, FOREhST method). The oral bioaccessibility data indicated that fluorene, phenanthrene, chrysene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene had the highest % bioaccessible fraction (based on their upper 75th percentile values being >60%) while the other PAHs had lower % bioaccessible fractions (means ranging between 35 and 59%). Significantly lower bioaccessibilities were determined for naphthalene. With respect to method validation and inter-laboratory comparison, the total and bioaccessible concentrations of benzo(a)anthracene, benzo(b)anthracene, benzo(k)fluoranthene, benzo(a)pyrene, indeno(1,2,3-cd)pyrene and dibenzo(a,h)anthracene was compared to published data derived using the same samples. The total PAH concentrations at the site were compared with generic assessment criteria (GAC) using the residential land use scenario (with plant uptake at 6% soil organic matter). Concentrations of 7 of the PAHs investigated within the soils could lead to an unacceptable risk to human health at this site.     

Porphyrin/Platinum(II) C^N^N Acetylide Complexes: Synthesis,Photophysical Properties,and Singlet Oxygen Generation

A new class of substituted porphyrins has been developed in which a different number of cyclometalated Pt^II C^N^N acetylides and polyethylene glycol (PEG) chains are attached to the meso positions of the porphyrin core, which are meant for photophysical, electrochemical, and in vitro light‐induced singlet oxygen (¹O₂) generation studies. All of these Zn^II porphyrin–Pt^II C^N^N acetylide conjugates show moderate to high (Φ_Δ=0.55 to 0.63) singlet oxygen generation efficiency. The complexes are soluble in organic solvents but, despite the PEG substituents, slowly aggregate in aqueous solvent systems. These conjugates also exhibit interesting photophysical properties, including near‐complete photoinduced energy transfer (PEnT) through the rigid acetylenic bond(s) from the Pt^II C^N^N antenna units to the Zn^II porphyrin core, which shows sensitized luminescence, as shown by quenching of Pt^II C^N^N‐based luminescence. Electrochemical measurements show a set of redox processes that are approximately the sum of what is observed for the Pt^II C^N^N acetylide and Zn^II porphyrin units. UV/Vis spectroscopic properties are supported by DFT calculations.     

Assessment of a geochemical extraction procedure to determine the solid phase fractionation and bioaccessibility of potentially harmful elements in soils: A case study using the NIST 2710 reference soil

Three mineral acid sequential extraction regimes (HNO₃ only, HNO₃ followed by HCl and aqua regia) were applied to the NIST 2710 contaminated reference soil. The major and trace element chemical analysis data from the extractions were subjected to a chemometric self-modelling mixture resolution procedure which identified that 12 distinct physico-chemical components were extracted. The fractionation of As, Cd, Ni and Pb between these components were determined. Tentative assignments of the mineralogical sources of the components were made. The human ingestion bioaccessible fraction of As, Cd and Pb were determined using the in vitro BARGE UBM bioaccessibility test and were found to be 51.6%, 68.0% and 68.4% respectively. The relationship between the lability of the physico-chemical components and the bioaccessible fraction of the soils was investigated and the bioaccessible fractions were assigned to specific components. The extraction scheme using aqua regia was found to be the most suitable as it was the only one which extracted the iron sulphide phase in the soil.