Non-isothermal thermogravimetric analysis of pyrolysis kinetics of four oil shales using Sestak–Berggren method

Journal of Thermal Analysis and Calorimetry - In this study, the non-isothermal pyrolysis method was used to investigate the pyrolysis characteristics of oil shale from four areas: namely Nongan,...     

Two novel Co (II)-coordination polymers as bifunctional materials for efficient photocatalytic degradation of dyes and electrocatalytic water oxidation

Two novel Co (II)- coordination polymers (CPs) based on 2,5-bis(4-carboxylpheny)-1,3,4-oxadiazole (bcpo), namely [Co/(bcpo)_0.5(tib)(H₂O)₂]_n (1) and [Co (bcpo)_0.5(bidpe)(H₂O)₂]_n (2) (tib = 1,3,5-tirs(1-imidazolyl)benzene, bidpe = 4,4′-bis (imidazolyl)diphenyl ether) have been synthesized under solvothermal conditions and characterized by powder X-ray diffraction (PXRD), single crystal X-ray diffraction, photochemistry as well as electrochemistry. The investigation of the photo-degradation methyl blue and methyl violet (MB, MV) properties of CPs 1–2 demonstrates that CP 1 shows great performance for the degradation of MB, and CP 2 could efficiently degrade MB/MV. Meanwhile, the possible photo-degradation mechanism has been proposed and explored. Simultaneously, electrochemistry studies show that both CPs 1 and 2 can catalyze water oxidation under an alkaline condition at the potential around 1.20 V vs. NHE with relatively low overpotential of 330–510 mV vs. NHE.     

纤维树脂界面剪切强度及纤维强度分布参数的实验测定

界面剪切强度及纤维强度分布参数是复合材料设计及应用研究中的重要参数，本文采用单纤维段埋入法测定了上述两个参数。通过实验研究说明了单纤维段埋入法是一种测定界面剪切强度及纤维强度分布参数的有效的实验方法；同时证实了基体的力学性能对界面剪切强度有着重要的影响。全部实验在自制的实验系统上完成     

Evaluation of Oil Yield of Oil Shale by Infrared Spectrometry Coupled with Ultrasound-assisted Extraction

The oil yield of oil shale was evaluated by Fourier transform infrared(FTIR) spectrometry coupled with ultrasound-assisted extraction. The extraction conditions, including the amount of sample, extraction time and extraction temperature, were examined and optimized. Twenty-four oil shale samples were collected and divided into calibration set and prediction set randomly with a ratio of 2:1. The oil yields of all the samples were determined by the routine method(low-temperature retorting) for reference. The linear regression(LR) equations of oil yield vs. the total area of the spectrum peaks in a wavenumber range of 3100-2800 cm^-1 as well as the sum of absorbance of three absorption peaks(2855, 2927 and 2955 cm^-1), and the multiple linear regression(MLR) model of oil yield vs. the absorbances of the three absorption peaks were constructed with the samples in calibration set and applied to the evaluation of the oil yields of the samples in prediction set, respectively. The results show that the MLR model provides more accurate predictions than the other LR two equations. The determination coefficient(R_p²), the root-mean-square error of prediction(RMSEP) and the residual prediction deviation(RPD) of the MLR model are 0.9616, 0.6458 and 3.6, respectively. The present method is a rapid and effective alternative to the routine low-temperature retorting method.     

Explicit formulas of propagation characteristics for unilateral finline

In this paper, the unilateral fintine characteristics including finite metallization thickness and depth of mounting grooves are analysed by transverse resonance principle combining moment method. The numerical results are presented, the influence of the finite metallization thickness and depth of grooves on the propagation characteristics are investigated in detail. Finally, a set of explicit formulas for the propagation characteristics of unilateral fintine are developed. To be compared with the rigorous numerical results, the errors are within ±1% for phase constant and ±2% for characteristic impedance respectivelly.     

二茂铁取代的笼型八聚(二甲基硅氧基)倍半硅氧烷的合成与表征

在Karstedt催化剂的催化作用下,通过把合成的笼型八聚(二甲基硅氧基)倍半硅氧烷与乙烯基二茂铁进行氧化硅烷化反应,合成了二茂铁取代的笼型八聚(二甲基硅氧基)倍半硅氧烷,产物经红外光谱、核磁共振氢谱与硅谱等进行了表征.     

A Rapidly Self‐Healing Host–Guest Supramolecular Hydrogel with High Mechanical Strength and Excellent Biocompatibility

It is still a challenge to achieve both excellent mechanical strength and biocompatibility in hydrogels. In this study, we exploited two interactions to form a novel biocompatible, slicing‐resistant, and self‐healing hydrogel. The first was molecular host–guest recognition between a host (isocyanatoethyl acrylate modified β‐cyclodextrin) and a guest (2‐(2‐(2‐(2‐(adamantyl‐1‐oxy)ethoxy)ethoxy)ethoxy)ethanol acrylate) to form “three‐arm” host–guest supramolecules (HGSMs), and the second was covalent bonding between HGSMs (achieved by UV‐initiated polymerization) to form strong cross‐links in the hydrogel. The host–guest interaction enabled the hydrogel to rapidly self‐heal. When it was cut, fresh surfaces were formed with dangling host and guest molecules (due to the breaking of host–guest recognition), which rapidly recognized each other again to heal the hydrogel by recombination of the cut surfaces. The smart hydrogels hold promise for use as biomaterials for soft‐tissue repair.     

Optimization of l -(+)-lactic acid production using pelletized filamentous Rhizopus oryzae NRRL 395

Lactic acid is used as a food additive for flavor and preservation and a precursor in the development of poly-lactic acid, a product used to make biodegradable plastics and textiles. Rhizopus oryzae NRRL 395 is known to be a strain that produces optically pure l-(+)-lactic acid. The morphology of Rhizopus cultures is complex, forming filamentous, clumps, and pellet mycelia. Different morphology growth has significant effects on lactic acid production. In bioreactors, the filamentous or clump mycelia increase the viscosity of the medium, wrap around impellers, and block the nutrient transportation, leading to a decrease in production efficiency and bioreactor performance. Growing fungi in pellet form can significantly improve these problems. In this study, factors that affect lactic acid production in pelletized flask cultures using R. oryzae NRRL 395 were investigated in detail. Completely randomized designs were used to determine the influence of culture temperature, time, concentration of glucose, and inoculum size. Lactic acid fermentation using clump and pellet morphologies were performed in a 5 L fermentor at the optimal values obtained from flask culture. Finally, fed-batch culture was used to enhance the lactate concentration in broth. The final lactate concentration of fed-batch culture reached 92 g/L. The data presented in the article can provide useful information on optimizing lactic acid production using alternative source materials.     

57Fe Mössbauer study of Eu1−x Sr x FeO3−y

The samples of Eu_1–x Sr _x FeO_3–y (x=0.0–1.0) were prepared by the solid state reaction method. Their X-ray diffraction patterns and⁵⁷Fe Mössbauer spectra at room temperature were measured. It is found that Sr ions incorporate in the lattice of EuFeO₃, the change of crystal structure is related to the dopant.⁵⁷Fe Mössbauer spectra consist of one magnetic, one doublet and one single paramagnetic components. The Fe ions in the cubic phase are in intermediate valence state between Fe(III) and Fe(IV) and may participate in electron hopping.