Simultaneous determination of rosiglitazone and metformin in plasma by gradient liquid chromatography with UV detection

A novel, fast and simple liquid chromatographic method was developed and validated for the simultaneous determination of rosiglitazone and metformin in human plasma. The analysis was performed on a phenyl column (250 mm × 4.6 mm i.d., 5 μm) using a gradient method starting with mobile phase composed of acetonitrile:5 mM acetate buffer pH 5.5 (75:25, v/v). The flow rate was 1 mL min⁻¹. UV detection was performed at 245 nm and verapamil was used as internal standard. The total run time was less than 10 min. Sample preparation included a simple protein precipitation step with acetonitrile. Validation experiments were performed to demonstrate stability, specificity, sensitivity, linearity, accuracy, precision and robustness. The limit of quantification was 100 ng mL⁻¹ for rosiglitazone and 250 ng mL⁻¹ for metformin. The extraction recoveries were 100.02-105.0% for rosiglitazone and 105.64-103.88% for metformin. The method was applied with success to plasma samples obtained from diabetic patients undergoing treatment with rosiglitazone and metformin.     

Electrochemical studies and square-wave voltammetric determination of fenofibrate in pharmaceutical formulations

The electrochemical reduction of fenofibrate at a hanging mercury drop electrode (HMDE) was investigated by cyclic voltammetry, square-wave voltammetry, and chronoamperometry. Different buffer solutions were used over a wide pH range (3.0–10.0). The best definition of the analytical signals was found in borate buffer (pH 9.0)–tetrabutylammonium iodide mixture containing 12.5% (v/v) methanol at –1.2 V (versus Ag/AgCl). According to cyclic voltammetric studies, the reduction was irreversible and diffusion controlled. The diffusion coefficient was 2.38×10^–6 cm² s^–1 as determined by chronoamperometry. Under optimized conditions of square-wave voltammetry, a linear relationship was obtained between 0.146–4.96 g mL^–1 of fenofibrate with a limit of detection of 0.025 g mL^–1. Validation parameters such as sensitivity, accuracy, precision, and recovery were evaluated. The proposed method was applied to the determination of fenofibrate in pharmaceutical formulations. The results were compared with those obtained by a published high-performance liquid chromatography method. No difference was found statistically.     

Chemo-bio catalysis using carbon supports: application in H2-driven cofactor recycling

Heterogeneous biocatalytic hydrogenation is an attractive strategy for clean, enantioselective C X reduction. This approach relies on enzymes powered by H₂-driven NADH recycling. Commercially available carbon-supported metal (metal/C) catalysts are investigated here for direct H₂-driven NAD⁺ reduction. Selected metal/C catalysts are then used for H₂ oxidation with electrons transferred via the conductive carbon support material to an adsorbed enzyme for NAD⁺ reduction. These chemo-bio catalysts show improved activity and selectivity for generating bioactive NADH under ambient reaction conditions compared to metal/C catalysts. The metal/C catalysts and carbon support materials (all activated carbon or carbon black) are characterised to probe which properties potentially influence catalyst activity. The optimised chemo-bio catalysts are then used to supply NADH to an alcohol dehydrogenase for enantioselective (>99% ee) ketone reductions, leading to high cofactor turnover numbers and Pd and NAD⁺ reductase activities of 441 h⁻¹ and 2347 h⁻¹, respectively. This method demonstrates a new way of combining chemo- and biocatalysis on carbon supports, highlighted here for selective hydrogenation reactions.

Heterogeneous chemo-bio catalytic hydrogenation is an attractive strategy for clean, enantioselective C X reduction.     

NIR Light-Induced ATRP for Synthesis of Block Copolymers Comprising UV-Absorbing Moieties

NIR exposure at 790 nm activated photopolymerization of monomers comprising UV-absorbing moieties by using [Cu^II/(TPMA)]Br₂ (TPMA=tris(2-pyridylmethyl)amine) in the ppm range and an alkyl bromide as initiator. Some of them comprised structural elements selected either from those showing proton transfer or photocycloaddition upon UV excitation. Polymers obtained comprise living end groups serving as macroinitiator for controlled synthesis of block copolymers with relatively narrow molecular weight distributions. Chromatographic results indicated formation of block copolymers produced by this synthetic approach. Free-radical polymerization of monomers pursued for comparison exhibited the expected broader dispersity of molecular weight compared to photo-ATRP. Polymerization of these monomers by UV photo-ATRP failed on the contrary to NIR photo-ATRP demonstrating the UV-filter function of the monomers. This work conclusively provides a new approach for the polymerization of monomers comprising UV-absorbing moieties through photo-ATRP in the NIR region. This occurred in a simple and efficient pathway. However, studies also showed that not all monomers chosen successfully proceeded in the NIR photo-ATRP protocol.     

Cyanines comprising barbiturate group facilitate NIR-light assisted ATRP under anaerobic and aerobic conditions at two wavelengths using Fe(III) catalyst

Cyanines with heptamethine pattern namely 5-(6-(2-(3-ethyl-1,1-dimethyl-1H-benzo[e]indol-2(3H)-ylidene)ethylidene)-2-(2-(3-ethyl-1,1-dimethyl-1H-benzo[e]indol-3-ium-2yl) vinyl) cyclo-hex-1-en-1-yl)-1,3-dimethyl-2,6-dioxo-1,2,3,6-tetrahydropyrimidin-4-olate comprising a barbiturate group facilitate controlled radical polymerization using FeBr₃ in the ppm range applying radiation at 790 nm. Tris(4-methoylphenyl)phosphine, Tris(2-pyridylmethyl)amine or tetrabutylammonium bromide served as ligand. The latter showed the best performance resulting in a system needing no amino nitrogen for photo-ATRP. Ethyl α-bromophenylacetate worked as initiator. The cyanine interacts with FeBr₃ resulting in a new absorption band at 877 nm that also resulted in formation of polymer exhibiting similar molecular weight but higher dispersity compared to that obtained by 790 nm radiation by exposure with a light-emitting diode (LED) emitting at 870 nm. This explains the reactivity of the system while other cyanines such as 2-[2-[3-[2-(1,3-Dihydro-1,3,3-trimethyl-2H-indol-2-ylidene)-ethylidene]-2-(1-phenyl- 1H-tetrazol-5-ylsulfanyl)-1-cyclohexen-1-yl]-ethenyl]-1,3,3-trimethyl-3H-indolium chloride showed no activity by exposure at 790 nm in combination with FeBr₃/Br⁻. Controlled radical polymerization was confirmed by successful chain extension and block copolymerization experiments resulting in polymers, which exhibit a dispersity of about 1.3. Interestingly, the new system comprising the aforementioned barbiturate substituted cyanine, FeBr₃/Br⁻ and ethyl α-bromophenylacetate showed a certain oxygen tolerance. Polymers obtained exhibited similar dispersity as those made under inert conditions.     

Silver nanoparticle containing silk fibroin bionanotextiles

Development of new generation bionanotextiles is an important growing field, and they have found applications as wound dressings, bandages, tissue scaffolds, etc. In this study, silver nanoparticle (AgNP) containing silk-based bionanotextiles were fabricated by electrospinning, and processing parameters were optimized and discussed in detail. AgNPs were in situ synthesized within fibroin nanofibers by UV reduction of silver ions to metallic silver. The influence of post-treatments via methanol treatment and glutaraldehyde (GA) vapor exhibited changes in the secondary structure of silk. Methanol treatment increased the tensile properties of fibers due to supported crystalline silk structure, while GA vapor promoted amorphous secondary structure. AgNP containing silk fibroin bionanotextiles had strong antibacterial activity against gram-positive Staphylococcus aureus and gram-negative Pseudomonas aeruginosa.     

Multiwalled Carbon Nanotubes‐Chitosan Modified Single‐Use Biosensors for Electrochemical Monitoring of Drug‐DNA Interactions

A multiwalled carbon nanotubes (CNT)‐chitosan (CHIT) modified pencil graphite electrode (CNT‐CHIT/PGE) was developed for the first time herein for electrochemical monitoring of the interaction of an anticancer drug, mitomycin C (MC) and DNA. The characterization of unmodified PGE, CHIT/PGE, CNT/PGE and CHIT‐CNT/PGE were performed by scanning electron microscopy and cyclic voltammetry techniques. The oxidation signals of MC and guanine were measured before and after interaction at the surface of CNT‐CHIT/PGEs using differential pulse voltammetry. Electrochemical impedance spectroscopy technique was also successfully utilized for monitoring of the interaction process at the surface of CNT‐CHIT/PGEs in different interaction times.     

Maximum loss and maximum gain of spectrally negative Lévy processes

The joint distribution of the maximum loss and the maximum gain is obtained for a spectrally negative Lévy process until the passage time of a given level. Their marginal distributions up to an independent exponential time are also provided. The existing formulas for Brownian motion with drift are recovered using the particular scale functions.     

Comparison of fluorescence-enhancing reagents and optimization of laser fluorimetric technique for the determination of dissolved uranium

Results from tests aimed at optimizing an instrumental procedure for the direct and fast determination of uranium in solution by laser fluorescence are presented. A comparison of sample fluorescence measured using different fluorescence enhancing reagents was performed: sodium pyrophosphate, orthophosphoric acid, sulphuric acid and a commercially available fluorescence enhancer were tested for the determination of uranium. From the experimental results, 0.01 M Na₄P₂O₇·10H₂O showed the best performance. Effects of reagent pH, different matrices, different concentrations of dissolved Th, and sample volume were investigated. Applications of the improved procedure for the determination of uranium in samples arising from UO₂-based high level nuclear waste dissolution studies are described.