Properties of naproxen ion-selective electrodes

Naproxen membrane electrodes based on different plasticizers and the quaternary ammonium salts (QASs) dimethyldidecylammonium bromide, methyltrioctylammonium chloride, or tetraoctylammonium chloride, were prepared. The following basic parameters were investigated for the optimal electrode: measurement range (10⁻⁴ − 10⁻¹ mol L⁻¹), slope of the linear range of the calibration curve (−58.3 mV decade⁻¹), limit of detection (6.0 × 10⁻⁵ mol L⁻¹), lifetime (2.5 months), dependence of the electrode potential on pH (5.5 − 9.0), reproducibility of potential (1.2 mV) and selectivity coefficients in relation to selected organic and inorganic anions. The electrode was utilized for determination of naproxen in tablets by the calibration curve method and the standard addition method.      

Solid Contact Nitrate Ion‐Selective Electrode Based on Ionic Liquid with Stable and Reproducible Potential

A simple, fast and cheap method of preparation of solid contact nitrate ion‐selective electrode is proposed. The electrode membrane phase consist of only three components: PVC, plasticizer and ionic liquid (IL).The ionic liquid trihexyltetradecylphosphonium chloride is used in triple function as ionophore, as lipophilic ionic component in order to reduce membrane resistance, and as transducer media in order to stabilize the potential of internal Ag/AgCl electrode. The electrical properties of the membrane were studied by electrochemical impedance spectroscopy and the influence of the interfacial water film was evaluated by potentiometric water layer test.     

Cobalt(II) ion-selective electrode with solid contact

A new all plastic sensor for Co²⁺ ions based on 2-amino-5 (hydroxynaphtyloazo-1′)-1,3,4 thiadiazole (ATIDAN) as ionophore was prepared. The electrode exhibits a low detection limit of 1.5 × 10⁻⁶ mol L⁻¹ and almost theoretical Nernstian slope in the activity range 4.0 × 10⁻⁶–1 × 10⁻¹ mol L⁻¹ of cobalt ions. The response time of the sensor is less than 10 s and it can be used over a period of 6 months without any measurable divergence in potential. The proposed sensor shows a fairly good selectivity for Co(II) over other metal ions. The electrode was successfully applied for determination of Co²⁺ in real samples and as an indicator electrode in potentiometric titration of Co²⁺ ions with EDTA.      

Solid Contact Nitrate Ion‐selective Electrode Based on Cobalt(II) Complex with 4,7‐Diphenyl‐1,10‐phenanthroline

Nitrates are a group of compounds widely distributed in the natural environment with many applications in various industries. Due to their ambiguous impact on the human body and suspicions of their carcinogenic activity, they have been very popular for decades and are the subject of research by many scientists in the field of medicine, biology and chemistry. Due to the need to monitor their content in environmental and food samples, various methods for their determination are developed. This paper proposes the use of a nitrate ion‐sensitive ion selective electrode with a membrane containing as the active ingredient a new cobalt(II) complex with 4,7‐diphenyl‐1,10‐phenanthroline (Bphen) of the formula Co(Bphen)₂(NO₃)₂(H₂O)₂. The obtained sensor showed the theoretical slope of the characteristic curve, a wide measuring range, as well as short response time and very good potential stability. It was successfully used for the determination of nitrates in real samples: in mineral water, tap water and river water from eastern Poland.     

Solid contact Zn2+ -selective electrode with low detection limit and stable and reversible potential

A new solid contact Zn²⁺ polyvinylchloride membrane sensor with 2-(2-Hydroxy-1-naphthylazo)-1,3,4 -thiadiazole as an ionophore has been prepared. For the electrode construction, ionic liquids, alkylmethylimidazolium chlorides are used as transducer media and as a lipophilic ionic membrane component. The addition of ionic liquid to the membrane phase was found to reduce membrane resistance and determine the potential of an internal reference Ag/AgCl electrode. The electrode with the membrane composition: ionophore: PVC: o-NPOE: ionic liquid in the percentage ratio of (wt.) 1:30:66:3, respectively, exhibited the best performance, having a slope of 29.8 mV decade^?1 in the concentration range 3×10^?7–1×10^?1 M. The detection limit is 6.9×10^?8 M. It has a fast response time of 5–7 s and exhibits stable and reproducible potential. It has a fast response time of 5–7 s and exhibits stable and reproducible potential, which does not depend on pH in the range 3.8–8.0. The proposed sensor shows a good and satisfactory selectivity towards Zn²⁺ ion in comparison with other cations including alkali, alkaline earth, transition and heavy metal ions. It was successfully applied for direct determination of zinc ions in tap water and as an indicator electrode in potentiometric titration of Zn²⁺ ions with EDTA.      

Ion transport across model lipid membranes containing light-harvesting complex II: an effect of light

The effect of light on proton transport across lipid membranes of small unilamellar liposomes containing incorporated major light-harvesting pigment-protein complex of Photosystem II (LHCII) has been studied with the application of pH-sensitive dyes entrapped inside vesicles. Proton permeability coefficient for LHCII-modified membranes was found to be about twice as high as in the case of the control pure lipid vesicles. Illumination of the samples with light absorbed by the LHCII-bound photosynthetic pigments considerably affects the kinetics of proton transport: it increases the rate and decreases the steady-state level of proton gradient across the membranes. The effect was interpreted in terms of heat-induced conformational changes of LHCII molecular structures that affect proton buffering capacity of this protein. Both the control and the LHCII-modified lipid membranes have been found to be practically impermeable to Ca(++) ions, as demonstrated by fluorescence of liposome-entrapped calcium-sensitive probe calcium crimson. The slight differences in the proton transport across the LHCII-containing membranes under the presence of Ca(++) suggest calcium binding to this antenna protein.     

Palladium-catalyzed C–H alkenylation of quinoxaline N-oxide enabled by a mono-N-protected amino acid

The efficient alkenylation of quinoxaline N-oxide was achieved via Pd-catalyzed C–H activation, using the assistance of a mono-N-protected amino acid. Further deoxygenation of the 2-styrylquinoxaline-N-oxides yielded the corresponding styrylquinoxaline derivatives.     

Complexes of Uracil (2,4-Dihydroxypyrimidine) Derivatives

Equilibrium studies have been carried out on complex formation of M²⁺ ions (M=Co, Ni, and Zn) with L = thymine, 6-chloromethyluracil, 5-hydroxymethyluracil, uracil, 6-methyluracil, and 6-umpm (dimethyl 6-uracilmethylphosphonate) in aqueous solution, at 25 ^∘;C and an ionic strength of I=0.1 mol⋅L⁻¹ (KNO₃). Potentiometric results indicate the formation of ML species (coordination via N3) for Co(II) and Ni(II) as well as a hydroxo complex MLH₋₁—with a deprotonated water of the inner coordination sphere. Titrations of Zn(II) confirmed both the existence of ML and MLH₋₁ species with 6-chloromethyluracil as well as 5-hydroxymethyluracil, whereas for uracil, thymine, and 6-methyluracil the only species accepted pH-metrically was MLH₋₁. For all the ligands under study the complexation with Zn(II) was reinvestigated by means of ion-selective electrodes (ISE). The role of substituents is discussed.     

Properties of ibuprofen ion-selective electrodes based on the ion pair complex of tetraoctylammonium cation

Ibuprofen membrane electrodes based on different plasticizers: diisobutyl phthalate (DIBP), o-nitrophenyloctyl ether (o-NPOE), dioctyl sebacate (DOS) and tetraoctylammonium 2-(4-isobutylphenyl)propionate were prepared. All electrodes show: a near Nernstian slope of characteristic (58.3–60.9 mV decade⁻¹) in the measurement range (10⁻⁴–10⁻¹ mol L⁻¹), limit of detection (5.0×10⁻⁵ mol L⁻¹), really long lifetime (12 months), dependence of the electrode potential on pH (5.5–9.0), reproducibility of potential (0.6–1.2 mV) and selectivity coefficients in relation to some organic and inorganic anions. The electrodes were applied for the determination of ibuprofen in tablets by the calibration curve method and the standard addition method.