A rapid and sensitive method for simultaneous determination of lamivudine and zidovudine in human serum by on-line solid-phase extraction coupled to liquid chromatography/tandem mass spectrometry detection

A method based on solid-phase extraction (SPE) coupled to high-performance liquid chromatography (HPLC) with positive ion electrospray ionization tandem mass spectrometry (ESI-MS/MS) detection was developed for the simultaneous determination of lamivudine (3TC) and zidovudine (AZT) in human serum, using didanosine (ddI) as internal standard. The acquisition was performed in multiple reaction monitoring (MRM) mode, monitoring the transitions m/z 230.0 --> 111.8 for 3TC, m/z 268.1 --> 126.8 for AZT, and m/z 237.2 --> 136.8 for ddI. The limits of detection and quantitation were 3 and 10 ng/mL for 3TC, and 5 and 15 ng/mL for AZT. The method was linear in the studied ranges (10-1500 ng/mL for 3TC and 15-3000 ng/mL for AZT), with r(2) > 0.99 for each drug, and the run time was 4 min. The intra-assay precisions (%) were in the ranges 1.9-8.7 (3TC) and 2.2-8.9 (AZT), the inter-assay precisions were in the ranges 2.6-9.0 (3TC) and 4.2-8.1 (AZT), and the intra- and inter-assay accuracies were >97% for both drugs. The absolute recoveries were 95-99% for 3TC (45, 600 and 1200 ng/mL) and 104-112% for AZT (45, 1000 and 2400 ng/mL). The analytical method was applied to a bioequivalence study in which 24 healthy adult volunteers received single oral doses of the reference formulation and two test combined AZT/3TC tablets, in an open, three-period, balanced, randomized, crossover protocol. Based on the 90% confidence interval of the individual ratios (test formulation/reference formulation) for C(max) (peak serum concentration) and AUC(0-inf) (extrapolated area under the serum concentration vs. time curve from time zero to infinity), it was concluded that the two test formulations are bioequivalent to the reference formulation with respect to the rate and extent of absorption of both 3TC and AZT.     

Determination of didanosine in human serum by on-line solid-phase extraction coupled to high-performance liquid chromatography with electrospray ionization tandem mass spectrometric detection: application to a bioequivalence study

A method based on solid-phase extraction coupled to liquid chromatography with positive ion electrospray ionization and tandem mass spectrometric detection was developed for the determination of didanosine in human serum, using lamivudine as internal standard. The acquisition was performed in the multiple reaction monitoring mode, monitoring the transitions m/z 237 --> 136.7 for didanosine and m/z 230 --> 111.7 for lamivudine. The method was linear over the range studied (10-1500 ng ml(-1)), with r(2) > 0.98, and the run time was 5 min. The intra- and inter-assay precisions were < or =10% and the intra- and inter-assay accuracies were >95%. The absolute recoveries were 99.8% (10 ng ml(-1)), 98.4% (30 ng ml(-1)), 91.5% (700 ng ml(-1)) and 94.7% (1200 ng ml(-1)). The limits of detection and quantitation were 5 and 10 ng ml(-1), respectively. The method was applied to a bioequivalence study, in which 24 healthy adult volunteers (12 men) received single oral doses (200 mg) of reference and test didanosine formulations (buffered powder for oral solutions), in an open, two-way, randomized, crossover protocol. The 90% confidence interval of the individual ratios (test formulation/reference formulation) for C(max) (peak serum concentration) and AUC(0-inf) (area under the serum concentration versus time curve from time zero to infinity) were within the range 80-125%, which supports the conclusion that the two formulations are bioequivalent regarding the rate and extent of didanosine absorption.     

Energy potential and thermogravimetric study of pyrolysis kinetics of biomass wastes

The use of agricultural wastes for energy conversion has been widely studied as renewable and carbon neutral energy sources. This paper aims to evaluate the energetic potential of six agricultural wastes—sugarcane bagasse, bean pods, corn stover, pineapple crown leaves, white cotton and natural coloured cotton stalks, through their characterization and pyrolysis kinetic study. The energetic potential of biomasses was evaluated by ultimate and proximate analysis, higher heating value (HHV), apparent density, and kinetic parameters of conversion and apparent activation energy (E_a) determined by Model-Free kinetics though thermogravimetric analysis data. The results indicate energetic density for dry basis biomasses, such as moisture content less than 7%, volatiles higher than 77% and moderate ash content. The HHVs were higher for the biomass with low O:C ratio. The E_a values increased with increasing O:C ratio and were also influenced by the biomass ash content. Among the studied biomasses, PCL are less explored for energy application, although the results confirm its potential for application in thermochemical processes such as pyrolysis or combustion.

     

Photoelectrochemical platform for sensing propyl gallate in edible oil samples based on CdTe quantum dots and poly(D-glucosamine)

Journal of Solid State Electrochemistry - This paper reports the development of a photoelectrochemical platform based on indium tin oxide (ITO) electrode modified with carboxyl-functionalized...     

Photostability and skin penetration of different E-resveratrol-loaded supramolecular structures

It is desirable and challenging to prevent E-resveratrol (E-RSV) from photoisomerizing to its Z-configuration to preserve its biological and pharmacological activities. The aim of this research was to evaluate the photostability of E-RSV-loaded supramolecular structures and the skin penetration profile of chemically and physically stable nanoestructured formulations. Different supramolecular structures were developed to act as carriers for E-RSV, that is, liposomes, polymeric lipid-core nanocapsules and nanospheres and solid lipid nanoparticles. The degrees of photostability of these formulations were compared with that of an ethanolic solution of E-RSV. The skin penetration profiles of the stable formulations were obtained using vertical diffusion cells (protected from light and under UVA radiation) with porcine skin as the membrane, followed by tape stripping and separation of the viable epidermis and dermis in a heated water bath. Photoisomerization was significantly delayed by the association of resveratrol with the nanocarriers independently of the supramolecular structure. Liposomes were the particles capable of maintaining E-RSV concentration for the longest time. On the other hand, E-RSV-loaded liposomes reduced in size showing low physical stability under UVA radiation. In the dark, the skin penetration profiles were very similar, but under UVA radiation the E-RSV-loaded nanocarriers showed increasing amounts in the total epidermis.     

Rearrangement, nucleophilic substitution, and halogen switch reactions of alkyl halides over NaY Zeolite: formation of the bicyclobutonium cation inside the zeolite cavity

Rearrangement and nucleophilic substitution of cyclopropylcarbinyl bromide over NaY and NaY impregnated with NaCl was observed at room temperature. The first-order kinetics are consistent with ionization to the bicyclobutonium cation, followed by internal return of the bromide anion or nucleophilic attack by impregnated NaCl to form cyclopropylcarbinyl, cyclobutyl, and allylcarbinyl chlorides. The product distribution analysis revealed that neither a purely kinetic distribution, similar to what is found in solution, nor the thermodynamic ratio, which favors the allylcarbinyl halide, was observed. Calculations showed that bicyclobutonium and cyclopropylcarbinyl carbocations are minimal over the zeolite structure, and stabilized by hydrogen bonding with the framework structure. A new process of nucleophilic substitution is reported, namely halogen switch, involving alkyl chlorides and bromides of different structures. The reaction occurs inside the zeolite pores, due to the confinement effects and is an additional proof of carbocation formation on zeolites. The results support the idea that zeolites act as solid solvents, permitting ionization and solvation of ionic species.     

Optimization of gas chromatographic-mass spectrometric analysis for fatty acids in hydrogenated castor oil obtained by catalytic transfer hydrogenation

Optimization of the analytical conditions for determination of the partially hydrogenated products of castor oil obtained by catalytic hydrogen transfer, using Pd/C, with limonene as hydrogen source, was carried out in this work. The study involved the use of three capillary columns: SPB-1, HP-5 and HP-20 M. The best resolution for the oleic acids isomers, C18:1, was obtained with HP-20 M column while, the best resolution, identification and quantification for the products containing OH and CO were obtained with a HP-5 column after the silylation of the methyl esters.     

Chemical analysis of the semipurified extract of Paullinia cupana and evaluation of in vitro inhibitory effects against Helicobacter pylori

Abstract

Paullinia cupana Kunth, commonly known as guarana, is a native Brazilian plant species from the Amazon area that presents various biological effects, including antimicrobial action. The aim of this study was to chemically analyse the semipurified aqueous extract (AqF) of the plant and to evaluate the activity of crude (CE), ethyl-acetate (EAF), and AqF extracts against Helicobacter pylori. The chemical profile of AqF was determined based on solid analysis ¹³C-NMR, direct infusion mass spectrometry (ESI-MS), and MALDI-TOF. The ¹³C-NMR spectrum showed characteristics of flavan-3-ol and oligomeric proanthocyanidins. ESI-MS revealed the presence of procyanidin, caffeic acid and its derivatives. MALDI-TOF analysis detected procyanidins of up to 6 units and profisetinidins of up to 5 units. Whereas CE and EAF showed inhibitory activity against H. pylori, CE, EAF, and AqF presented not high inhibitory activity against urease. The results demonstrate the potential of P. cupana to control and prevent H. pylori infection.     

Seasonal variation in the chemical composition and antimicrobial activity of volatile oils of three species of Leptospermum (Myrtaceae) grown in Brazil

This study investigates the seasonal variation of three species of Leptospermum (Myrtaceae) grown in Brazil. The chemical composition of the volatile oils of L. flavescens and L. petersonii did not show any significant seasonal variation in the major components, while for Leptospermum madidum subsp. sativum the levels of major constituents of the volatile oils varied with the harvest season. Major fluctuations in the composition of L. madidum subsp. sativum oil included α-pinene (0-15.2%), β-pinene (0.3-18.5%), α-humulene (0.8-30%), 1,8-cineole (0.4-7.1%) and E-caryophyllene (0.4-11.9%). Levels of β-pinene (0.3-5.6%), terpinen-4-ol (4.7-7.2%) and nerolidol (55.1-67.6%) fluctuated seasonally in the L. flavescens oil. In L. petersonii, changes were noted for geranial (29.8-32.8%), citronellal (26.5-33.9%) and neral (22.7-23.5%). The activity of the volatile oils against the tested bacteria differed, depending on season the oils were obtained. In general, the volatile oils were more active against Gram-positive bacteria.     

Analysis of the interface configuration and flow characteristics in tanks in a multiphase liquid–gas system using numerical simulation

A multiphase study was conducted using a turbulence model of large eddy simulation to investigate the interaction between the gaseous phase and the interface and its respective behaviour until the liquid phase movement was established, first in the near interface, as well as the presence of turbulent structures in the study of transport between phases. The results are shown for three surface configurations: a surface with waves in which the Reynolds number and friction velocity of the gaseous phase are, respectively, 210 and 0.25 m/s; a surface with small undulations, 86 and 0.10 m/s; and a flat surface, 43 and 0.05 m/s. Coherent structures are detected on both sides of the interface; these are intensified and less elongated for larger Reynolds numbers. Additionally, the interface exhibits distinct behaviour with regard to the examined phases. For the gaseous phase, it behaves like a no-slip surface.