X-ray determination of the mean amplitudes of vibration and debye temperatures of some rare earth monochalcogenides

The x-ray diffraction intensities of Bragg reflections have been measured at room temperature for thulium selenide, samarium sulphide, samarium selenide and samarium telluride. On the basis of a common amplitude approximation, the Debye-Waller factor, the mean amplitude of vibration and the Debye temperature have been evaluated. The values of the Debye temperatures and mean amplitudes of vibration are 176±16°K, 0·185 ± 0·017 Å (TmSe), 155 ± 7°K, 0·244 ± 0·012 Å (SmS), 153 ± 14°K, 0·221 ± 0·020 Å (SmSe) and 151 ± 20°K, 0·204 ± 0·027 Å (SmTe).     

帕隆藏布流域堆积体边坡的工程地质特征及稳定性评价

位于藏东南的帕隆藏布流域,处在东喜马拉雅构造结的北缘,是新构造强烈隆升区,断层、褶皱等地质构造发育。在青藏高原隆升及气候变化等内外动力作用下,研究区内堆积体分布广泛,具有独特的工程地质特征并成为该区内地质灾害的主要物源。由于河流的下切及川藏公路的修建,形成了许多高陡的堆积体边坡,以冰碛边坡最为典型。由于其特殊的物源特征及形成过程,冰碛物具有粒度分布范围广、粗粒含量多等与其他沉积物不同的粒度特征。冰碛物粒度分布范围广的特征,导致随着研究尺度的不同,其结构特征也不相同,具有明显的尺度效应。冰碛土的力学强度一般强于其他堆积体,但受不同粒径颗粒的含量及分布、形成时代的影响,其力学特征也有所差异。作者对川藏公路沿线部分典型的剖面进行了量测,所量测的剖面虽然只是整个斜坡的一部分,与经验数据相比,仍表现出高陡的特征,而且很多边坡在既高且陡的形态下仍能保持稳定。本文以极限平衡理论为基础,采用多种方法对这类边坡的稳定性进行计算分析,求出边坡的安全系数。考虑各种地震烈度下边坡的稳定性,得出这些边坡的安全系数与地震加速度具有严格的指数相关关系。     

Investigation on the reactivity of nucleophilic radiohalogens with arylboronic acids in water: access to an efficient single-step method for the radioiodination and astatination of antibodies

Easy access to radioiodinated and ²¹¹At-labelled bio(macro)molecules is essential to develop new strategies in nuclear imaging and targeted radionuclide therapy of cancers. Yet, the labelling of complex molecules with heavy radiohalogens is often poorly effective due to the multiple steps and intermediate purifications needed. Herein, we investigate the potential of arylboron chemistry as an alternative approach for the late stage labelling of antibodies. The reactivity of a model precursor, 4-chlorobenzeneboronic acid (1) with nucleophilic iodine-125 and astatine-211 was at first investigated in aqueous conditions. In the presence of a copper(ii) catalyst and 1,10-phenanthroline, quantitative radiochemical yields (RCYs) were achieved within 30 minutes at room temperature. The optimum conditions were then applied to a CD138 targeting monoclonal antibody (mAb) that has previously been validated for imaging and therapy in a preclinical model of multiple myeloma. RCYs remained high (>80% for ¹²⁵I-labelling and >95% for ²¹¹At-labelling), and the whole procedure led to increased specific activities within less time in comparison with previously reported methods. Biodistribution study in mice indicated that targeting properties of the radiolabelled mAb were well preserved, leading to a high tumour uptake in a CD138 expressing tumour model. The possibility of divergent synthesis from a common modified carrier protein demonstrated herein opens facilitated perspectives in radiotheranostic applications with the radioiodine/²¹¹At pairs. Overall, the possibility to develop radiolabelling kits offered by this procedure should facilitate its translation to clinical applications.

The high reactivity of astatine and iodine in water with arylboronic acids provides access to an efficient single-step antibody radiolabelling.     

Dose–Response Relationship of Photobiomodulation Therapy on Matrix Metalloproteinase in Healing Dynamics of Diabetic Neuropathic Ulcers—An in vivo Study

Individuals with diabetic foot ulcers have overlapped the inflammatory, proliferative and remodeling phase, making the tissue vulnerable to delayed healing responses. We aimed to establish the dose–response relationship of photobiomodulation therapy of different doses and matrix metalloproteinases in the healing dynamics of diabetic neuropathic ulcers. Diabetes was induced in 126 Albino Wistar rats, and neuropathy was induced to the hind paw by a sciatic nerve injury method. An excisional wound was created on the neuropathy-induced leg. Photobiomodulation therapy of dosages 4, 6, 8, 10, 12 and 15 J cm⁻² and wavelength 655 nm and 808 nm was irradiated. Photobiomodulation therapy of dosages 4, 6 and 8 J cm⁻² showed better wound healing properties with optimized levels of matrix metalloproteinases-1 and 8. We observed a strong dose response in the experimental group treated with 6 and 8 J cm⁻². The findings from the present study conclude that photobiomodulation therapy of dosages 4, 6 and 8 J cm⁻² is suggestive of usefulness in diabetic neuropathic ulcer healing. Markers like matrix metalloproteinases may give a clear direction on response to the therapy. Based on the findings from the present study, we recommend to validate the findings for safety and efficacy in future through human prospective randomized controlled clinical trials.     

211At and 125I-Labeling of (Hetero)Aryliodonium Ylides: Astatine Wins Again

Despite the growing interest in radioiodine and ²¹¹At-labeled radiopharmaceuticals, the search for radiolabeling reactions has been somewhat neglected, resulting in a limited number of available radiosynthetic strategies. Herein we report a comparative study of nucleophilic ¹²⁵I and ²¹¹At-labeling of aryliodonium ylides. Whereas radioiodination efficiency was low, ²¹¹At-labeling performed efficiently on a broad scope of precursors. The most activated aryliodonium ylides led rapidly to quantitative reactions at room temperature in acetonitrile. For deactivated precursors, heating up to 90 °C in glyme and addition of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) as radical scavenger appeared essential to avoid precursor degradation and to achieve high radiochemical yields and molar activity. The approach was applied successfully to the preparation of 4-[²¹¹At]astatophenylalanine (4-APA), an amino acid derivative increasingly studied as radiotherapeutic drug for cancers. This validated aryliodonium ylides as a valuable tool for nucleophilic ²¹¹At-labeling and will complement the short but now growing list of available astatination reactions.     

W1{infty}-convergence of the discrete free boundary for obstacle problems

We examine the discrete free boundaries arising from a finiteelement discretization of a variational inequality. We giveL error bounds for the Hausdorff distance of the discrete andtrue free boundary, as well as for the normals. The theoreticalresults are confirmed by numerical experiments in two and threedimensions.     

PCR technology for screening and quantification of genetically modified organisms (GMOs)

Although PCR technology has obvious limitations, the potentially high degree of sensitivity and specificity explains why it has been the first choice of most analytical laboratories interested in detection of genetically modified (GM) organisms (GMOs) and derived materials. Because the products that laboratories receive for analysis are often processed and refined, the quality and quantity of target analyte (e.g. protein or DNA) frequently challenges the sensitivity of any detection method. Among the currently available methods, PCR methods are generally accepted as the most sensitive and reliable methods for detection of GM-derived material in routine applications.The choice of target sequence motif is the single most important factor controlling the specificity of the PCR method. The target sequence is normally a part of the modified gene construct, for example a promoter, a terminator, a gene, or a junction between two of these elements. However, the elements may originate from wildtype organisms, they may be present in more than one GMO, and their copy number may also vary from one GMO to another. They may even be combined in a similar way in more than one GMO. Thus, the choice of method should fit the purpose. Recent developments include event-specific methods, particularly useful for identification and quantification of GM content. Thresholds for labelling are now in place in many countries including those in the European Union. The success of the labelling schemes is dependent upon the efficiency with which GM-derived material can be detected. We will present an overview of currently available PCR methods for screening and quantification of GM-derived DNA, and discuss their applicability and limitations. In addition, we will discuss some of the major challenges related to determination of the limits of detection (LOD) and quantification (LOQ), and to validation of methods.     

The modular analytical procedure and validation approach and the units of measurement for genetically modified materials in foods and feeds

Food and feed analysts are confronted with a number of common problems, irrespective of the analytical target. The analytical procedure can be described as a series of successive steps: sampling, sample processing, analyte extraction, and ending, finally, in interpretation of an analytical result produced with, e.g., real-time polymerase chain reaction. The final analytical result is dependent on proper method selection and execution and is only valid if valid methods (modules) are used throughout the analytical procedure. The final step is easy to validate-the measurement uncertainty added from this step is relatively limited and can be estimated with a high degree of precision. In contrast, the front-end sampling and processing steps have not evolved much, and the corresponding methods are rarely or never experimentally validated according to internationally harmonized protocols. In this paper, we outlined a strategy for modular validation of the entire analytical procedure, using an upstream validation approach, illustrated with methods for genetically modified materials that may partially apply also to other areas of food and feed analyses. We have also discussed some implications and consequences of this approach in relation to reference materials, measurement units, and thresholds for labelling and enforcement, and for application of the validated methods (modules) in routine food and feed analysis.