Determination of Chromium (VI) in Airborne Particulate Matter by Electrothermal Atomic Absorption Spectrometry

Hexavalent chromium Cr(VI) is a well-established carcinogen associated with lung, nasal, and sinus cancer. Cr(VI) threshold limit values in workroom air have been recently lowered. Consequently, the currently available analytical methods are insufficiently sensitive or high cost. In this paper, a simple, cost-effective, sensitive, and reproducible method using solid-phase extraction with electrothermal atomic absorption spectrometry for determination of hexavalent chromium in airborne samples is reported. The method validation included selectivity, linearity, accuracy, and precision. Interferences from other ions likely to be present in airborne samples, including trivalent chromium, were tested and selectivity was demonstrated. The detection and quantification limits were, respectively, as low as 0.1 and 0.4?µg?L^?1. The linearity ranged from 0.5 to 50.0?µg?L^?1, with a regression coefficients exceeding 0.998. The extraction recovery exceeded 98%. The developed method was successfully compared with a reference spectrophotometric method. The performances achieved were similar to ion chromatography and high-performance liquid chromatography approaches. The novel method was tested on airborne samples collected from the workplace. The method’s performance suggests that it may be an alternative to high-cost techniques for monitoring occupational exposure to hexavalent chromium.     

Laser micro-machining of small objects for high-energy laser experiments

Targets for high-energy laser experiments are polymer or metal objects of small dimensions. These objects need high-precision processes (typical sizes of a few hundred micrometers with micrometer accuracy). In this paper, some targets for high-energy laser experiments obtained by picosecond Q-switched Nd:YAG laser and KrF excimer laser micro-machining are presented. All of the targets use an original process. Activities include cutting, drilling, and marking elements. A summary of targets made using laser processes will be presented.     

Linear and Bilinear Multiplier Operators for the Dunkl Transform

The main purpose of this article is to study the L _p -boundedness of linear and bilinear multiplier operators for the Dunkl transform in the one dimensional case.     

Theoretical studies of vibrational spectra of [N(CH3)4]2ZnCl4−yBry compounds with y = 0, 2 and 4

The infrared and Raman spectra of [N(CH₃)₄]₂ZnCl_4?yBr_y, where y = 0, 2 and 4, have been analyzed with ab initio calculations of the vibrational characteristics of constitutive polyhedra, tetramethylammonium [N(CH₃)₄]⁺ and [ZnCl_4?xBr_x]^2? (x = 0, 1, 2, 3 and 4) tetrahedra. The optimized geometries, calculated vibrational frequencies, infrared intensities and Raman activities are calculated using Hartree–Fock and density functional theory B3LYP methods with 3-21G, 6-31G(d) and 6-311G⁺(d,p) basis sets. Calculation of the root mean square difference δ_rms between the observed and calculated frequencies allows to give scaling factors and to deduce that the best agreements are obtained by B3LYP/6-311G⁺(d,p) for [N(CH₃)₄]⁺ and B3LYP/3-21G for [ZnCl_4?xBr_x]^2?. The present study establishes a strongly reliable assignment of the vibrational modes of [ZnCl_4?xBr_x]^2? tetrahedra based on comparison between experimental and ab initio calculations, both of the frequencies and the intensities of the Raman signals.     

Investigation of electrocoagulation reactor design parameters effect on the removal of cadmium from synthetic and phosphate industrial wastewater

This study investigates the effect of reactor design parameters on cadmium removal from industrial wastewater discharged by the Tunisian Chemical Group (TCG) to improve as much as possible efficiency and cost of electrocoagulation (EC) process. Based on an examination of the design parameters one by one, the best cadmium removal was achieved for an inter-electrode distance (d_ie) of 0.5 cm, monopolar connection mode, stirring speed of 300 rev min^?1, surface-area-to-volume ratio (S/V) of 13.6 m^?1, and an initial temperature of 50 °C. These operating conditions are allowed to achieve efficient removal in a relatively short operating time with the lowest energy consumption and cost possible. The present study proved that the parameters that have an effect on the operating cost are the electrode configuration, inter-electrode distance and S/V ratio. The energy consumption, the pH evolution, and the treatment cost were studied. The investigation of the effect of all the selected optimum EC design parameters together on the removal of cadmium from the TCG wastewater proved that the treatment was highly efficient; 100% of cadmium removal was reached in 5 min, with a very low power consumption (1.6 kW h m^?3) and very low cost (0.116 TND m^?3). Moreover, EC was found to be capable of removing cadmium as well as other pollutants at the same time from the case-study industrial wastewater. The investigation carried out in this work explores and proposes a very cost-effective treatment method to remove heavy metals from industrial wastewater if compared to results reported about cost of this treatment process through other widely used technologies such as coagulation (4.36 Tunisian National Dinar (TND) m^?3) and precipitation (9.96 TND m^?3) employed in previous studies.     

Evaluation of Seven Essential Oils as Seed Treatments against Seedborne Fungal Pathogens of Cucurbita maxima

Essential oils are gaining interest as environmentally friendly alternatives to synthetic fungicides for management of seedborne pathogens. Here, seven essential oils were initially tested in vivo for disinfection of squash seeds (Cucurbita maxima) naturally contaminated by Stagonosporopsis cucurbitacearum, Alternaria alternata, Fusarium fujikuro, Fusarium solani, Paramyrothecium roridum, Albifimbria verrucaria, Curvularia spicifera, and Rhizopus stolonifer. The seeds were treated with essential oils from Cymbopogon citratus, Lavandula dentata, Lavandula hybrida, Melaleuca alternifolia, Laurus nobilis, and Origanum majorana (#1 and #2). Incidence of S. cucurbitacearum was reduced, representing a range between 67.0% in L. nobilis to 84.4% in O. majorana #2. Treatments at 0.5 mg/mL essential oils did not affect seed germination, although radicles were shorter than controls, except with C. citratus and O. majorana #1 essential oils. Four days after seeding, seedling emergence was 20%, 30%, and 10% for control seeds and seeds treated with C. citratus essential oil (0.5 mg/mL) and fungicides (25 g/L difenoconazole plus 25 g/L fludioxonil). S. cucurbitacearum incidence was reduced by ~40% for plantlets from seeds treated with C. citratus essential oil. These data show the effectiveness of this essential oil to control the transmission of S. cucurbitacearum from seeds to plantlets, and thus define their potential use for seed decontamination in integrated pest management and organic agriculture.     

Reaction of 5-aminotetrazole with vinamidinium salts: Formation of 2-(N, N-dimethylamino)-5-substituted pyrimidines

The cyclocondensation of vinamidinium salts with 5-aminotetrazole in basic media affords regiospecifically good yields of 2-(N, N-dimethylamino)-5- aryl-, arylsulfonyl- and 2-(N, N-dimethylamino)-5-formyl-pyrimidines, respectively.     

Chemical composition and biological activities of essential oils of Pinus patula

Essential oils isolated from needles of Pinus patula by hydrodistillation were analyzed by gas chromatography-flame ionization detection (GC-FID) and gas chromatography mass spectrometry (GC-MS). Thirty-eight compounds were identified, representing 98.3% of the total oil. The oil was rich in monoterpene hydrocarbons (62.4%), particularly alpha-pinene (35.2%) and beta-phellandrene (19.5%). The in vitro antifungal assay showed that P. patula oil significantly inhibited the growth of 9 plant pathogenic fungi. The oil, when tested on Sinapis arvensis, Lolium rigidum, Phalaris canariensis and Trifolium campestre, completely inhibited seed germination and seedling growth of all species. Our preliminary results showed that P. patula essential oil could be valorized for the control of weeds and fungal plant diseases.     

Effect of some physical and chemical parameters on fluoride removal by nanofiltration

In natural waters, fluoride ions are necessary and beneficial for the human being. At higher level of F⁻ in water, it is toxic and detrimental to human health, leading to serious problems such as dental and skeleton fluorosis. According to the World Health Organization, the acceptable concentrations of fluoride in potable water are in the range of 0.7–1.5 mg L⁻¹. Various treatment technologies for fluoride removal from water have been used such as ion exchange, adsorption and membrane processes. In the present study, removal of fluoride ions from aqueous solutions was investigated using a polyamide thin film composite nanofiltration membrane denoted as HL 2514 T from Osmonics Company. Through this membrane, the mechanism of transport was investigated. The Kedem–Katchelsky model was applied in order to determine phenomenological parameters σ and P _s, respectively, the reflection coefficient of the membrane and the solute permeability of ions. The convective and diffusive parts of the mass transfer were quantified. The retention of monovalent and bivalent salts by this membrane shows that it is negatively charged. In the second part, retention of fluoride anions was investigated. Results show that the retention of fluoride by HL membrane exceeds 80%. The influence of the chemical parameters (feed concentration and ionic strength) and the physical parameters (applied pressure and recovery) on the elimination of fluoride was studied.     

Controlled adhesion of Salmonella Typhimurium to poly(oligoethylene glycol methacrylate) grafts

Poly(oligoethylene glycol methacrylate), POEGMA, brushes were prepared by surface‐initiated atom transfer radical polymerization (SI‐ATRP) on gold‐coated silicon wafers. Prior to ATRP, the substrates were grafted by brominated aryl initiators via the electrochemical reduction of a noncommercial parent diazonium salt of the formula BF₄^?, ⁺N₂‐C₆H₄‐CH(CH₃)Br. The diazonium‐modified gold plates (Au‐Br) served as macroinitiators for ATRP of OEGMA which resulted in hydrophilic surfaces (Au‐POEGMA) that could be used for two distinct objectives: (i) resistance to fouling by Salmonella Typhimurium; (ii) specific recognition of the same bacteria provided that the POEGMA grafts are activated by anti‐Salmonella. The Au‐POEGMA plates were characterized by XPS, polarization modulation‐infrared reflection‐absorption spectroscopy (PM‐IRRAS) and contact angle measurements. Both Beer‐Lambert equation and Tougaard's QUASES software indicated a POEGMA thickness that exceeds the critical ～10 nm value necessary for obtaining a hydrophilic polymer with effective resistance to cell adhesion. The Au‐POEGMA slides were further activated by trichlorotriazine (TCT) in order to covalently bind anti‐Salmonella antibodies (AS). The antibody‐modified Au‐POEGMA specimens were found to specifically attach Salmonella Typhimurium bacteria. This work is another example of the diazonium salt/ATRP process to provide biomedical polymer surfaces. Copyright © 2011 John Wiley & Sons, Ltd.