cyc-DEP: Cyclic immunofluorescence profiling of particles collected using dielectrophoresis

Cancer is a highly heterogenous disease that requires precise detection tools and active surveillance methods. Liquid biopsy assays provide an agnostic way to follow the complex trajectory of cancer, providing better patient stratification tools for optimized treatment. Here, we present the development of a low-volume liquid biopsy assay called cyc-DEP (cyclic immunofluorescent imaging on dielectrophoretic chip) to profile biomarkers collected on a dielectrophoretic microfluidic chip platform. To enable on-chip cyclic imaging, we optimized a fluorophore quenching method and sequential rounds of on-chip staining with fluorescently conjugated primary antibodies. cyc-DEP allows for the quantification of a multiplex array of proteins using 25 µl of a patient plasma sample. We utilized nanoparticles from a prostate adenocarcinoma (LNCaP) cell line and a panel of six target proteins to develop our proof-of-concept technique. We then used cyc-DEP to quantify blood plasma levels of target proteins from healthy individuals, low-grade and high-grade prostate cancer patients (n = 3 each) in order to demonstrate that our platform is suitable for liquid biopsy analysis in its present form. To ensure accurate quantification of signal intensities and comparisons between different samples, we incorporated a signal intensity normalization method (fluorescent beads) and a custom signal intensity quantification algorithm that account for the distribution of signal across hundreds of collection regions on each chip. Our technique enabled a threefold improvement in multiplicity for detecting proteins associated with fluid samples, opening doors for early detection, and active surveillance through quantification of a multiplex array of biomarkers from low-volume liquid biopsies.     

TG and DSC analyses of eucalyptus black liquor as alternative methods to estimate solids content

As a consequence of the continuous increase in the production rate of pulp and paper mills around the world, a great quantity of black liquor, a by-product of the wood digestion process, is produced. This by-product has a great potential as biomass, but needs to be concentrated to higher solids content to be burned as fuel in a recovery boiler. This is necessary to make the pulping process economically feasible, incinerating black liquor to produce high pressure steam, recycling inorganic chemicals to the process. The greater the solids content in black liquor, the better the combustion process in the boiler. Nevertheless, concentration of solids in black liquor above 75 mass/%, causes scaling formation on the heat transfer surfaces of evaporators and concentrators, due to the precipitation of sodium salts, reducing the overall efficiency of this equipment. The aim of this work is to evaluate the use of thermal analyses techniques, TG and DSC, as alternative methods to estimate solids content in eucalyptus black liquor samples since this information is essential to understand scaling formation process, allowing actions to reduce this industrial problem. Traditional techniques applied to determine solids content use gravimetric methods, which are simple, fine, but take a lot of time to be executed. Thermal analyses have proved to be very accurate and have the advantage to be faster than the traditional techniques. On the other hand, the cost-benefit relationship of the traditional technique is much greater and the final decision which one should be used depends on the conditions available.     

Physical properties (thermal,thermomechanical, magnetic,and adhesive) of some smart orthodontic wires

Thermal, thermomechanical, and caloric properties of commercial orthodontic wires (produced by Natural Orthodontics Corp., USA) with cylindrical and rectangular geometry were studied. Depending on the applied forces, there were identified the range of elasticity, the elasticity–viscoelasticity coexistence domain and the domain in which a maximum force of 18 N is applied, for the orthodontic wires. When increasing the thickness of orthodontic wires, deformation decreases. The Controlled Force Module, in the tension mode, was used for the determination of the orthodontic wires elongation at application of the stretching forces from 0 to 13 N, at 35 °C, maintaining each static force value for 3 min. The increase in the cross-sectional area of the orthodontic wires disfavors the process of elongation of the sample, at the same applied static force. Using the Multi-Frequency–Strain–Stress modulus, in the tension mode, DMA cyclic heating–cooling measurements were performed. The measured physical quantities for orthodontic wires were Storage Modulus, Loss Modulus, Tanδ and Stiffness, at heating and cooling. Thus, the characteristic temperatures of the phase transitions (A_s, A_f, M_s, M_f), of all the studied orthodontic wires were identified. Also, the values of the elasticity modulus (Young’s Modulus) of the orthodontic wires were calculated at 35 °C. With the DSC Q200 device, using temperature-modulated differential scanning calorimetry method, a multi-step temperature variation program, was applied to a rectangular wire, in three stages (cooling–heating–cooling). Through the interpretation of heat fluxes (reversible, irreversible and total), the phase transitions in the formation of martensite, austenite, but also of the rombohedral phase (R-phase), were identified. Formations of austenite and martensite were also evidenced by the classical DSC method, but the classical DSC method also enabled the R-phase identification. The adherence of some food dyes on the orthodontic wires, as well as the modification of the surface roughness of the orthodontic wire after the deposition of the food dye, was also studied. By magnetic measurements, it was established that the orthodontic wires had paramagnetic properties at room temperature, and nitinol was a mixture of 49.2% austenite and 50.8% martensite.

     

Multiplexed therapeutic drug monitoring of antipsychotics in dried plasma spots by LC‐MS/MS

In this work, a convenient method for the therapeutic monitoring of seven common antipsychotic drugs in “dried plasma spot” samples has been developed. It is based on the liquid chromatography tandem mass spectrometry technique, operating in multiple reaction monitoring mode, and a straightforward procedure for the simultaneous extraction of all antipsychotics in a single step, with high extraction yield. The method was fully validated with proper accuracy, precision, selectivity and sensitivity, for all the drugs. Limits of quantification were 0.12, 1.09, 1.46, 1.47, 5.70, 1.32, 1.33 µg/L for haloperidol, aripiprazole, olanzapine, quetiapine, clozapine, risperidone, and paliperidone, respectively. Accuracy, intra‐ and interday precision values were <10% for all drugs at all concentration levels examined. The method was tested in the analysis of 30 plasma samples from real patients for each drug. The proposed analytical approach, by combining practical and logistical advantages of microsampling with liquid chromatography tandem mass spectrometry analytical performance, could offer an ideal strategy for accurate and timely therapeutic drug monitoring of antipsychotic drugs in most clinical settings, even in remote centers and/or in out‐patient settings, bringing so many potential improvements in psychiatric patient care.     

Fast analysis of catecholamine metabolites MHPG and VMA in human plasma by HPLC with fluorescence detection and a novel SPE procedure

A fast and sensitive high-performance liquid chromatographic method has been developed for the determination in human plasma of MHPG (3-methoxy-4-hydroxyphenylethylenglycol) and VMA (vanillyl mandelic acid), the main metabolites of epinephrine and norepinephrine. Analyses were carried out at 325 nm while exciting at 285 nm on a reversed-phase column (Atlantis C18, 150 mm × 4.6 mm I.D., 5 μm) using a mobile phase composed of 2% methanol and 98% aqueous citrate buffer at pH 3.0. A careful solid-phase extraction procedure, based on mixed-mode reversed-phase - strong anion exchange Oasis cartridges (MAX, 30 mg, 1 mL), was developed for the pre-treatment of plasma samples. Extraction yields were satisfactory, always higher than 90%. Calibration curves were linear over the 0.2-40.0 ng mL⁻¹ concentration range for MHPG and over the 0.5-40.0 ng mL⁻¹ concentration range for VMA. The method was successfully applied to plasma samples of former drug users undergoing detoxification therapy and subjects “at risk” of developing drug addiction.     

Separation of catechins and methylxanthines in tea samples by capillary electrochromatography

In this paper, the simultaneous separation of several polyphenols such as (+)‐catechin, (–)‐epicatechin, (–)‐epigallocatechin, theophylline, caffeine in green and black teas by capillary electrochromatography (CEC) was developed. Several experimental parameters such as stationary phase type, mobile phase composition, buffer and pH, inner diameter of the columns, sample injection, were evaluated to obtain the complete separation of the analysed compounds. Baseline resolution of the studied polyphenols was achieved within 30 min by using a capillary column (id 100 μm) packed with bidentate C₁₈ particles for 24.5 cm and a mobile phase composed of 5 mM ammonium acetate buffer pH 4 with H₂O/ACN (80:20, v/v). The applied voltage and the temperature were set at 30 kV and 20°C. Precision, detection and quantification limits, linearity, and accuracy were investigated. A good linearity (R² > 0.9992) was achieved over a concentration working range of 2–100 μg/mL for all the analytes. LOD and LOQ were 1 and 2 μg/mL, respectively, for all studied compounds. The CEC method was applied to the analysis of those polyphenols in green and black tea samples after an extraction procedure. Good recovery data from accuracy studies ranged between 90% and 112% for all analytes.     

Separation and HPLC analysis of 15 benzodiazepines in human plasma

Benzodiazepines (BZDs) are often prescribed to schizophrenic or depressed patients, as a part of polypharmacy regimens. An HPLC method has been developed for the simultaneous determination of 15 BZDs in human plasma. Separation was obtained by using a C8 RP column and a mobile phase composed of 65% aqueous phosphate buffer at pH 3.0 and 35% ACN. The UV detector was set at 220 nm and clomipramine was used as the internal standard. A careful pretreatment procedure of plasma samples was developed, using SPE with C1 cartridges, which gives high extraction yields (> 97%). The LOQs were always lower than 7.6 ng/mL and the LODs always lower than 2.6 ng/mL for all analytes. The method was successfully applied to plasma samples from depressed and schizophrenic patients undergoing polypharmacy with one or more BZDs. Precision data, as well as accuracy results, were satisfactory and no interference from other drugs was found. Hence, the method seems to be suitable for the therapeutic drug monitoring (TDM) of patients undergoing therapy with one or more BZDs.     

High-performance liquid chromatographic determination of Levetiracetam in human plasma: comparison of different sample clean-up procedures

An accurate and precise high-performance liquid chromatographic method using diode array detection for the determination of the novel antiepileptic, Levetiracetam, has been developed. Three clean-up procedures for the analysis of Levetiracetam in human plasma were implemented and evaluated, namely solid-phase extraction, deproteinization by addition of organic solvents and formation of insoluble salts. Adenosine was used as the internal standard for all three sample pretreatment procedures. Among the several cartridges used for solid-phase extraction, the hydrophilic-lypophilic balance (Oasis) HLB) phase provides the best extraction yield of Levetiracetam, together with high precision. With the two other clean-up procedures involving plasma deproteinization by addition of methanol or zinc sulphate, lower sensitivity and precision of the assays were obtained. However, they are cheaper and faster when compared with the solid-phase extraction procedure.     

Separation and analysis of glycyrrhizin, 18beta-glycyrrhetic acid and 18alpha-glycyrrhetic acid in liquorice roots by means of capillary zone electrophoresis

Glycyrrhizin is the main active compound of Glycyrrhiza glabra root extracts; according to recent studies, glycyrrhizin and its aglycon, glycyrrhetic acid, have interesting therapeutic properties. A new capillary electrophoretic method has been developed for the separation and quantification of glycyrrhizin, beta-glycyrrhetic acid and its isomer a-glycyrrhetic acid. Separation of the analytes was achieved in less than 3 min on a fused silica capillary, by injecting the samples at the short end of the capillary (effective length: 8.5 cm). The background electrolyte was composed of pH 10.0 carbonate buffer, methanol and ethylene glycol (80/10/10) and contained 0.4% beta-cyclodextrin; indomethacin was used as the internal standard. Diode array detection was used, with quantitative assays carried out at 254 nm. Linearity was found over the 5-200 and 2.5-100 microg mL(-1) concentration ranges for glycyrrhizin and glycyrrhetic acid, respectively. This method has been applied to the determination of the analytes in different matrices (liquorice roots and commercial confectionery products), and to the purity control of beta-glycyrrhetic acid obtained from the hydrolysis of glycyrrhizin. When analysing beta-glycyrrhetic acid and its epimer in roots, the samples were purified by means of a suitable solid-phase extraction (SPE) procedure with Oasis HLB cartridges, which granted good selectivity, eliminating matrix interference.     

Comparison of analytical methods for the quality control of a new formulation containing soy extract and melatonin

Three analytical methods have been developed and compared for the quality control of a new formulation (Soymen GN(R) capsules) containing soy extract and melatonin for the treatment of menopausal symptoms. The first method is based on MEKC with diode-array detection, using a mixture of basic carbonate buffer (95%) and methanol (5%), containing 55 mM SDS, as the BGE. The second method is an HPLC method with UV detection at 260 nm. The third method is an HPLC method coupled to amperometric detection which is carried out at an oxidation potential of +0.8 V. In both HPLC systems, the chromatographic separation is obtained on an RP C18 column using a mixture of ACN and an acidic phosphate buffer (25:75 v/v) as the mobile phase. A feasible pretreatment procedure with a methanol/water mixture has been implemented to achieve the quantitative extraction of the main soy isoflavones and of melatonin from the capsules. The results obtained with the three methods are in good agreement with each other and satisfactory in terms of linearity (r(2) >0.9996), precision (RSD <5.4%) and accuracy (recovery >97%). Thus, each of the three analytical methods seems to be suitable for the simultaneous analysis of the main soy isoflavones and melatonin in the new commercial formulation.