Electrochemical Sensing of Tryptophan and Tyrosine in Chronic Kidney Disease Patients Using Magnetic Core/Ag Nanoparticles Shell Nanocomposite Modified Electrode

Journal of Analytical Chemistry - This paper reports the production of a novel magnetic nanocomposite based on core-shell Fe3O4@Ag nanoparticles. Fe3O4@Ag nanoparticles were used to fabricate a...     

Magnetic solid-phase extraction of imatinib and doxorubicin as cytostatic drugs by Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/graphene oxide nanocomposite

Magnetic solid-phase extraction based on Fe₃O₄/graphene oxide nanocomposites was investigated for the separation, preconcentration and determination of imatinib and doxorubicin in aqueous solutions. Synthesis of Fe₃O₄/graphene oxide was characterized by transmission electron microscopy, energy-dispersive X-ray analyzer and vibrating sample magnetometer. After optimizing the conditions, optimal experimental conditions including sample pH, the amount of the magnetic nanoparticles, the effect of salt concentration and other chemotherapy medications, eluent type and extraction time were studied and established. The method showed good linearity for the determination of doxorubicin and imatinib in the concentration range of 0.01–100 μg mL^?1 in aqueous solutions with limit of detection 1.8 ng mL^?1 for doxorubicin and 1.9 ng mL^?1 for imatinib. The relative recoveries of doxorubicin and imatinib levels were 96.7 and 88.4%, respectively. The results indicate that the present procedure is a suitable method for extraction of imatinib and doxorubicin from environmental water samples.     

Adsorptive Stripping Differential Pulse Voltammetric Determination of Risperidone with a Multi‐Walled Carbon Nanotube‐Ionic Liquid Paste Modified Glassy Carbon Electrode

A new composite electrode has been fabricated based on coating multi‐walled carbon nanotubes (MWCNTs) and n‐octylpyridinum hexafluorophosphate (OPPF₆) ionic liquid composite on a glassy carbon (GC) electrode (OPPF₆‐MWCNTs/GCE). This electrode shows very attractive electrochemical performances for electrooxidation of risperidone (RIS) compared to conventional electrodes using carbon and mineral oil, notably improved sensitivity and stability. The oxidation peak potentials in cyclic voltammogram of RIS on the OPPF₆‐MWCNTs/GCE was occurred around 230 mV vs. SCE at Britton–Robinson (B–R) buffer (pH 4.0) at scan rate of 100 mV s^?1. The electrochemical parameters such as diffusion coefficient (D), charge transfer coefficient (α) and the electron transfer rate constant (k/_s) were determined using cyclic voltammetry. Under the optimized conditions, the peak current was linear to risperidone concentration over the concentration range of 10–200 nM with sensitivity of 0.016 μA/nM^?1 using differential pulse voltammetry. The detection limit was 6.54 nM (S/N = 3). The electrode also displayed good selectivity and repeatability. In the presence of clozapine (CLZ) the response of RIS kept almost unchanged. Thus this electrode could find application in the determination of RIS in some real samples. The analytical performance of the OPPF₆‐MWCNTs/GCE was demonstrated for the determination of RIS in human serum and pharmaceutical samples.     

A Fast Response Strontium Ion‐Selective Electrode Prepared by Sol‐Gel Membrane Technique

A sol‐gel electrode, based on 6‐(4‐nitrophenyl)‐2‐phenyl‐4,4‐dipropyl‐3,5‐diaza‐bicyclo [3,1,0] hex‐2‐ene (NPDBH) as a neutral ionophore, was successfully developed for the detection of Sr²⁺ in aqueous solutions. Theoretical calculations confirmed NPDBH selectivity toward strontium in comparison with some other metal ions. The electrode responds to Sr²⁺ ion with a sensitivity of 29.1±0.4 mV/decade over the range 8.0×10^?7–1.0×10^?1 M. Selectivity coefficients determined by matched potential method (MPM) indicate high selectivity for strontium ions. The electrode has a fast response time of 11 s and a working pH range of 3.0–10.0. The sol‐gel electrode shows detection limit of 7.5×10^?8 M.     

Preparation of a solid-state ion-selective electrode based on polypyrrole conducting polymer for magnesium ion

In this study, a potentiometric sensor based on a pencil graphite electrode (PGE) coated with polypyrrole doped with Titan yellow dye (PPy/TY) was prepared for potentiometric determination of magnesium ion in aqueous solutions. The structural characteristics of magnesium sensor electrode (PGE/PPy/TYMg) were studied using scanning electron microscopy and Fourier transform infrared along with energy-dispersive spectroscopy. Under the optimal conditions, the electrode reveals a good Nernstian behavior with slope of 28.27 ± 0.40 mV per decade over the concentration range of 1.0 × 10^?5–5.0 × 10^?2 M and a detection limit of 6.28 × 10^?6 M. The potentiometric response of fabricated electrode toward magnesium ion was found to be independent of the pH of the test solution in the pH range of 4.5–8.0. The electrode showed fast response time (<10 s) and good shelf lifetime (>2 months). The prepared magnesium sensor electrode can also be used as an indicator electrode in potentiometric titration of Mg²⁺ with EDTA with distinguished end point. The electrode revealed good selectivity with respect to many cations including alkali, alkaline earth, transition and heavy metal ions. The introduced magnesium electrode was used for measurement of Mg²⁺ ion in real samples without any serious interferences from other ions.     

The potentiometric behavior of polymer-supported metallophthalocyanines used as anion-selective electrodes

Liquid polymer membrane electrodes based on nickel and manganese phthalocyanines were examined for use as anion-selective electrodes. The electrodes were prepared by incorporating the ionophores into plasticized poly(vinyl chloride) membranes, which were directly coated onto the surfaces of graphite electrodes. The resulting electrodes demonstrate near-Nernstian responses over a wide linear range of perchlorate anion (5 × 10⁻⁷ to 1 × 10⁻¹ M). The electrodes have a fast response time, submicromolar detection limits (5 × 10⁻⁷ M perchlorate), and could be used over a wide pH range of 3.5–10. The influences of lipophilic cationic and anionic additives on the response properties of the electrodes were investigated. The proposed sensors revealed high selectivity for perchlorate over a number of common inorganic and organic anions. The highest selectivity was observed for the electrode based on manganese phthalocyanine in the presence of the lipophilic anionic additive sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate. Application of the electrodes to determine perchlorate in tap water and human urine is also reported.      

Determination of cadmium and zinc in waters by flame atomic absorption spectrometry after cloud-point extraction

Phase separation of nonionic surfactants in aqueous solutions was used to extract cadmium and zinc. After complexation with 6-(4-nitrophenyl)-2,4-diphenyl-3,5-diazabicyclo[3.1.0]hexene-2 (pH 1), cadmium and zinc were quantitatively transferred into the phase rich with the nonionic surfactant octylphenoxypolyethoxyethanol. After the addition of tetrahydrofuran and HCl to the extract, the elements were determined by flame atomic absorption spectrometry.     

Photochromic behavior of several new synthesized dyes via Zincke salts

Synthesis of several ‘dyes’, analogs of retinal imine visual pigment via nucleophilic attack of some secondary amines to pyridinium salts following precyclic ring‐opening reaction, is discussed. The photochromic properties of these dyes have been studied by UV‐Vis spectroscopy under irradiation of UV light. Copyright © 2009 John Wiley & Sons, Ltd.     

NMR structural elucidation and photochromic behavior of new 1,3-diazabicyclo[3.1.0]hex-3-ene derivatives

Several 6-(4-nitrophenyl)-4-phenyl-1,3-diazabicyclo[3.1.0]hex-3-ene derivatives having various substituents on C² were synthesized, and their ¹H NMR spectra and photochromic behavior were examined.