Internal plasticization of poly(vinyl) chloride using glutamic acid as a branched linker to incorporate four plasticizers per anchor point

Internal plasticization of polyvinyl chloride (PVC) using thermal azide‐alkyne Huisgen dipolar cycloaddition between azidized PVC and electron‐poor acetylenediamides incorporating a branched glutamic acid linker resulted in incorporation of four plasticizing moieties per attachment point on the polymer chain. A systematic study incorporating either alkyl or polyethylene glycol esters provided materials with varying degrees of plasticization, with depressed T_g values ranging from ?1 °C to 62 °C. Three interesting trends were observed. First, T_g values of PVC bearing various internal plasticizers were shown to decrease with increasing chain length of the plasticizing ester. Second, branched internal plasticizers bearing triethylene glycol chains had lower T_g values compared to those with similar length long‐chain alkyl groups. Finally, thermogravimetric analysis of these internally plasticized PVC samples revealed that these branched internal plasticizers bearing alkyl chains are more thermally stable than similarity branched plasticizers bearing triethylene glycol units. These internal tetra‐plasticizers were synthesized and attached to PVC‐azide in three simple synthetic steps. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1821–1835     

Janus Gold Nanostars–Mesoporous Silica Nanoparticles for NIR-Light-Triggered Drug Delivery

Janus gold nanostar–mesoporous silica nanoparticle ( AuNSt–MSNP ) nanodevices able to release an entrapped payload upon irradiation with near infrared (NIR) light were prepared and characterized. The AuNSt surface was functionalized with a thiolated photolabile molecule ( 5 ), whereas the mesoporous silica face was loaded with a model drug (doxorubicin) and capped with proton-responsive benzimidazole-β-cyclodextrin supramolecular gatekeepers ( N 1 ). Upon irradiation with NIR-light, the photolabile compound 5 photodissociated, resulting in the formation of succinic acid, which induced the opening of the gatekeeper and cargo delivery. In the overall mechanism, the gold surface acts as a photochemical transducer capable of transforming the NIR-light input into a chemical messenger (succinic acid) that opens the supramolecular nanovalve. The prepared hybrid nanoparticles were non-cytotoxic to HeLa cells, until they were irradiated with a NIR laser, which led to intracellular doxorubicin release and hyperthermia. This induced a remarkable reduction in HeLa cells viability.     

Gelation Kinetics and Mechanical Properties of Thiol-Tetrazole Methylsulfone Hydrogels Designed for Cell Encapsulation

Hydrogel precursors that crosslink within minutes are essential for the development of cell encapsulation matrices and their implementation in automated systems. Such timescales allow sufficient mixing of cells and hydrogel precursors under low shear forces and the achievement of homogeneous networks and cell distributions in the 3D cell culture. The previous work showed that the thiol-tetrazole methylsulfone (TzMS) reaction crosslinks star-poly(ethylene glycol) (PEG) hydrogels within minutes at around physiological pH and can be accelerated or slowed down with small pH changes. The resulting hydrogels are cytocompatible and stable in cell culture conditions. Here, the gelation kinetics and mechanical properties of PEG-based hydrogels formed by thiol-TzMS crosslinking as a function of buffer, crosslinker structure and degree of TzMS functionality are reported. Crosslinkers of different architecture, length and chemical nature (PEG versus peptide) are tested, and degree of TzMS functionality is modified by inclusion of RGD cell-adhesive ligand, all at concentration ranges typically used in cell culture. These studies corroborate that thiol/PEG-4TzMS hydrogels show gelation times and stiffnesses that are suitable for 3D cell encapsulation and tunable through changes in hydrogel composition. The results of this study guide formulation of encapsulating hydrogels for manual and automated 3D cell culture.     

International Intercomparison of Solar UVR Spectral Measurement Systems in Melbourne in 2013

Monitoring ambient solar UVR levels provides information on how much there is in both real time and historically. Quality assurance of ambient measurements of solar UVR is critical to ensuring accuracy and stability and this can be achieved by regular intercomparisons of spectral measurement systems with those of other organizations. In October and November of 2013 a solar UVR spectroradiometer from Public Health England (PHE) was brought to Melbourne for a campaign of intercomparisons with a new Bentham spectrometer of Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) and one at the Australian Bureau of Meteorology (BOM), supported by New Zealand's National Institute for Water and Atmosphere (NIWA). Given all three spectroradiometers have calibrations that are traceable to various national standards, the intercomparison provides a chance to determine measurement uncertainties and traceability that support UV measurement networks in Australia, New Zealand and the UK. UV Index measurements from all three systems were compared and ratios determined for clear sky conditions when the scans from each instrument were within 2 min of each other. While wavelengths below 305 nm showed substantial differences between the PHE unit and the two other systems, overall the intercomparison results were encouraging, with mean differences in measured UV Index between the BOM/NIWA and those of PHE and ARPANSA of <0.1% and 7.5%, respectively.     

Analysis of ethyl glucuronide and ethyl sulfate using aqueous normal‐phase chromatography with mass spectrometry

The use of aqueous normal‐phase chromatography is explored as a possible format for the analysis of the forensically significant compounds ethyl glucuronide and ethyl sulfate. Standard solutions of the two compounds are used to verify the retention capabilities of two stationary phases (diamond hydride and undecanoic acid). These results are then compared to data obtained on hair extracts to determine if any matrix effects exist with respect to both retention and peak shape. The undecanoic stationary phase is used for the establishment of calibration curves for quantitative analysis. These curves are utilized to determine the concentration of ethyl glucuronide in several hair samples tested.     

Mammalian Arginase Inhibitory Activity of Methanolic Extracts and Isolated Compounds from Cyperus Species

Polyphenolic enriched extracts from two species of Cyperus, Cyperus glomeratus and Cyperus thunbergii, possess mammalian arginase inhibitory capacities, with the percentage inhibition ranging from 80% to 95% at 100 µg/mL and 40% to 64% at 10 µg/mL. Phytochemical investigation of these species led to the isolation and identification of two new natural stilbene oligomers named thunbergin A-B (1–2), together with three other stilbenes, trans-resveratrol (3), trans-scirpusin A (4), trans-cyperusphenol A (6), and two flavonoids, aureusidin (5) and luteolin (7), which were isolated for the first time from C. thunbergii and C. glomeratus. Structures were established on the basis of the spectroscopic data from MS and NMR experiments. The arginase inhibitory activity of compounds 1–7 was evaluated through an in vitro arginase inhibitory assay using purified liver bovine arginase. As a result, five compounds (1, 4–7) showed significant inhibition of arginase, with IC₅₀ values between 17.6 and 60.6 µM, in the range of those of the natural arginase inhibitor piceatannol (12.6 µM). In addition, methanolic extract from Cyperus thunbergii exhibited an endothelium and NO-dependent vasorelaxant effect on thoracic aortic rings from rats and improved endothelial dysfunction in an adjuvant-induced arthritis rat model.     

Diffusiophoresis in suspensions of highly charged soft particles

Diffusiophoresis phenomenon of aoft particles suspended in binary electrolyte solutions is explored theoretically in this study based on the spherical cell model, focusing on the chemiphoresis component in absence of diffusion potential. Both the electrostatic and hydrodynamic aspects of the boundary confinement, or steric effect, due to the presence of neighboring particles are examined extensively under various electrokinetic conditions. Significant local extrema are found in mobility profiles expressed as functions of the Debye length in general, synchronized with the strength of the motion-inducing double layer polarization. Moreover, a seemingly peculiar phenomenon is observed that the soft particles may move faster in more concentrated suspensions. The competition between the simultaneous enhancement of the motion-inducing electric driving force and the motion-retarding hydrodynamic drag force from the boundary confinement effect of the neighboring particles is found to be responsible for it. The above findings are also demonstrated experimentally in a very recent study on the diffusiophoretic motion of soft particles through porous collagen hydrogels. The results presented here are useful in various practical applications of soft particles like drug delivery.